torque AUDI A8 1995 D2 / 1.G AEB Engine Technical Data Spark Plug

28-1
Technical data, spark plugs Engine code
AEB

Engine idle RPM

Idle RPM cannot be adjusted, is corrected by idle air control 820-900 RPM
RPM limit
Operates by shutting off fuel injectors approx. 6500 RPM
Ignition timing
Ignition timing cannot be adjusted, is monitored by Engine Control Module (ECM)
Firing order 1-3-4-2
Spark plugs Tightening torque 30 Nm (22 ft lb)
Part No.
(Always check with your Parts Department for correct part numbers) 101 000 033 AB (NGK)
101 000 051 AB (BOSCH)

Manufacturer's codes
(if applicable) BKUR 7 ET (NGK)
F6 LTCR (BOSCH)


Electrode gap - mm 0.7 to 0.9 mm

Maintenance interval See Owner's Manual
Spark plug connector resistance
approx. 2 k
Pa
ge 1 of 22 Technical data, s
park
plugs
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.1

28-7
If displayed values are OK:

- Check readiness code Page 01
-59
. If
Diagnostic Trouble Code (DTC) memory has
been erased, or ECM was disconnected,
generate new readiness code Page 01
-62
.

-
Press button to advance program
sequence.
- Press buttons -0- and -6- to select "End Output"
function 06, and press -Q- button to confirm
input.
Evaluating display group 20 Display group: 20
Display fields: 1-4
Possible cause

Correcting action

All cylinders retarded more
than 10 (crankshaft)
Knock sensor faulty- Continuation Page 28
-8

Connector corroded
Knock sensor
incorrectly torqued - Loosen knock sensor and re-tighten to 20 Nm (15 ft lb)
Components loose
on engine - Tighten components
Pa
ge 9 of 22 Technical data, s
park
plugs
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.1