battery AUDI A8 1996 D2 / 1.G AEB Engine Additional Signal
Page 18 of 29
24-155
If displayed value is OK (as specified):
-
Press button toadvance program sequence.
- Press buttons -0- and -6- to select "End Output"
function 06, and press -Q- button to confirm
input.
- Check readiness code Page 01
-59
. If
Diagnostic Trouble Code (DTC) memory has
been erased, or ECM was disconnected,
generate new readiness code Page 01
-62
.
Continuation:
If displayed value is NOT OK (not as specified):
- Connect VAG 1598/22 test box to ECM harness
connector Page 01
-56
.
- Connect VAG 1527B LED voltage tester
between ECM/test box sockets 3 (battery
voltage, terminal 30) and 22.
LED must come on with selector lever in P
or N
LED must then go out when selecting
2/3/4/R/D
Pa
ge 18 of 29 Additional si
gnals
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.5