wiring AUDI A8 1996 D2 / 1.G AEB Engine Throttle Valve Control Module And Checking

24-118

Continuation (with no measured voltage)

- Disconnect 8-pin harness connector from throttle
valve control module -J338-.

If wiring is OK: - Check wiring for open circuit between ECM/test box and 8-pin harness
connector.

Connector terminal 5 to ECM/test box socket 75
Specified value: max. 1.5
- Replace throttle valve control module -J338-.
- Carry out adaptation of throttle valve control module to ECM Page
24
-119
.
- Check readiness code Page 01
-59
. If Diagnostic Trouble Code
(DTC) memory has been erased, or ECM was disconnected, generate
new readiness code Page 01
-62
.
Pa
ge 32 of 38 Throttle valve control module, checkin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.2