display AUDI A8 1999 D2 / 1.G 01V Transmission Select Lever Mechanism Workshop Manual
Page 5 of 75
"D" symbol on the shift mechanism cover must
turn off and the "+" and "-" symbols must light
up.
The display of the selector lever position in the
instrument cluster must change from
"PRND432" to "54321" when shifting selector
lever into the Tiptronic gate.
Pa
ge 5 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1
Page 32 of 75
37-29
Assembly
Solenoids -C- and -D- must be securely fastened on
masking panel, if necessary masking panel must be
replaced.
If retaining straps -A- or -B- are damaged, the upper
cover must be replaced. - Remove lower cover -3- and masking panel -2-.
- Lay masking panel -2- into upper cover,
installation position analog display.
- Carefully clip lower cover -3- into upper cover -1-.
- Install shift mechanism cover page 37
-24
Pa
ge 32 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1
Page 58 of 75
37-53
3 -
Cover
With gear display and display for shift lock
solenoid To remove, disengage retaining tabs for
shift mechanism housing Remove upward together with item 4 and
5 .
4 -
Light track With wiring harness and LEDs for base
illumination Wire routing Fig. 4
, page 37
-61
5 -
Guide
With masking panel and mirror for
individual gear display Mechanism can be loosened from the
cover by disengaging the four retaining
tabs at interior.
Pa
ge 58 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1