roof AUDI A8 1999 D2 / 1.G AHA ATQ Engines Cylinder Block Crankshaft And Flywheel Component Service Manual
Page 28 of 33
13-29
Pistons and piston rings
Pistons
Installation position: arrow on piston crown must point in driving direction.
CAUTION!
DO NOT scratch or scribe on piston crown. The surface has a
coating that must not be damaged.
Checking piston diameter - Mark cylinder number on piston crown using waterproof felt pen.
- Measure pistons approx. 10 mm (3/8 in.) from bottom edge at right
angle (90 ) to piston pin. Deviation from nominal size: 0.04 mm (0.0016 in.).
Pa
ge 28 of 33 C
ylinder block, crankshaft and fl
ywheel, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.13.2