ignition AUDI A8 2000 D2 / 1.G 01V Transmission Select Lever Mechanism User Guide
Page 63 of 75
37-58
24 -
Pivot pin
Removing: carefully press out using
screwdriver
25 -
Shift mechanism housing Removing and installing Fig. 2
, page
37
-60
26 -
Selector lever
27 -
Pull-lever
Insert into selector lever together with
spring item 28
28 -
Spring For pull-lever
29 -
Ignition/Starter Switch
Pa
ge 63 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1
Page 73 of 75
37-68
- Set ignition/starter lock in "Drive" position.
- Shift selector lever into position "P".
- Lift up locking bracket -1- and pull locking cable
out of ignition/starter lock.
- Remove cover with guide (selector lever
mechanism) page 37
-5 .
- Unclip locking cable from securing spring at shift
mechanism housing, slightly lift up securing
spring to do so.
- Loosen cable tie -2- and remove locking cable.
Pa
ge 73 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1