air condition AUDI A8 2000 D2 / 1.G AEB Engine Additional Signal
Page 1 of 29
24-145
Additional signals
Signal from A/C compressor, checking
Required special tools and test equipment
VAG 1551 or VAG 1552 Scan Tool (ST) with
VAG 1551/3 adapter cable
VAG 1598/22 test box
Multimeter US 1119 (Fluke 83 or equivalent)
VW 1594 connector test kit
Wiring diagrams
Test conditions
A/C functions OK
A/C is switched off
Vehicle at room temperature-above 15 C
(59 F)
No malfunctions stored in Diagnostic Trouble
Pa
ge 1 of 29 Additional si
gnals
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.5
Page 6 of 29
24-148
Continuation
If the displayed values are NOT OK:
- Connect VAG 1598/22 test box to ECM harness
connector Page 01
-56
.
- Check wiring for open circuit, short circuit to B+
or short circuit to Ground between ECM/test box
terminal 8 and A/C control head -E87-, or
Transmission Control Module (TCM).
Electrical Wiring Diagrams, Troubleshooting &
Component Locations If the wiring is OK:
- Check function of A/C control head -E87-.
Repair Manual, Heating & Air Conditioning,
Repair Group 01
Or:
Repair Manual, 5 Spd. Automatic
Pa
ge 6 of 29 Additional si
gnals
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.5
Page 8 of 29
24-149
Vehicle speed signal, checking
Required special tools and test equipment
VAG 1551 or VAG 1552 Scan Tool (ST) with
VAG 1551/3 adapter cable
Multimeter US 1119 (Fluke 83 or equivalent)
VW 1594 connector test kit
Wiring diagrams
Test conditions
Vehicle Speed Sensor (VSS) OK; checking:
Repair Manual, Electrical Equipment, Repair
Group 90
Notes:
To check Vehicle Speed Sensor -G68-, the
vehicle must be driven. A second technician is
required to operate the scan tool during the
road test.
Pa
ge 8 of 29 Additional si
gnals
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.5
Page 11 of 29
24-151
- Road test and compare indicated vehicle speed
with value in display field 3 (2nd technician
required).
Display fields
1 2 3 4
Display group 5: Engine Electronics
Display xxx RPM xx.xx ms xxx kph Idle
Part throt
Full throt
Decel
Enrich
Indicates Engine speed
(in 40 RPM
steps) Engine
load Vehicle speed Operating
condition
Range 0-6800 RPM --- --- ---
Specified
value --- --- Approx. vehicle speed ---
--- --- If no vehicle speed is displayed Page 24
-152
,
Continuation
---
If displayed value is OK:
Pa
ge 11 of 29 Additional si
gnals
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.5
Page 17 of 29
24-154
Read Measurin
g Value Block
HELP
Input display group number XXX
Indicated on display
- Press buttons -0-, -5- and -6- to input display group number 56, and
press -Q- button to confirm input.
Read Measuring Value Block 56 1 2 3 4
Indicated on display (1-4 = display fields)
- Compare display with specified value in display field 4:
Display fields
1 2 3
4
Display group 56: Engine idle
Display xxxx RPM xxxx RPM x.xx g/s
xxxx
Indicates Actual engine
speed
(in 10 RPM
steps) Specified engine
speed
(in 10 RPM
steps) Control value-Idle mass air flow
(idle air control valve) Operating condition
Range 0-2550 RPM --- ---
---
Specified
value 0 RPM 0 RPM -1.11 to 1.11 g/s
0000 = Selector lever in P or N
0010 = Selector lever in 2/3/4/R/D
--- --- ---
If not as specified Page 24
-155
,
Continuation;
Explanation of display Page 24-
16
Pa
ge 17 of 29 Additional si
gnals
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.5