navigation system AUDI A8 2004 D3 / 2.G RNS_E Navigation System Manual

Navigation (NAV)113
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP map
page 143 and in Setup Navigation
page 151 to d i s p l a y th e
map.
If you are navigating without stopovers, you have the option of
selecting from up to three routes, in addition to detailed route infor-
mation
page 130.
If you are n avigatin g with stopovers, you are shown the entire route
with all stopovers and detailed information in an overview
page 132.
You can also use the map as presented in the Navigation System
display to enter a destination
page 128.
Applies to vehicles: with display of the instrument clusterVisual presentation in the instrument cluster display
A s s o o n a s y o u h a v e e n t e r e d a r o u t e i n t o t h e N a v i g a t i o n S y s t e m a n d
begun navigating, guidance to your destination will also be
displayed in the instrument cluster display.
Fig. 116 Instrument
cluster display:
Example of route guid-
ance presentation
Display
Shor t descriptionEstimated time of arrival at destination or current
stopoverDistance remaining to next turn pointDirectional arrowLocation-dependent display of freeway, highway
and street names
An arrow before the display identifies the name of
the street onto which you should turn.Total kilometers to destination or current stopover
Fig. 117 Instrument
cluster display:
Example of route guid-
ance presentation
(turn off)
A1A2A3A4A5

Navigation (NAV) 120
– Select Select city center to navigate to the center of the
selected locality, or
– Select Input street name, Special destination in city or
Destination input on map to set more detailed destina-
tion criteria.
– Select Start route guidance
page 129.After you have started route guidance, you are offered up to three
routes
page 130, f i g .1 3 6 . S e l e c t o n e o f t h e r o u t e s b y r o t a t i n g a n d
pressing the control knob. If you do not select any of the routes
s u g g e s t e d , t h e r o u t e m a r k e d i s a u t o m a t i c a l l y i m p o r t e d a f t e r a d e l a y
once the trip has started or during the trip. The delay gives you the
opportunity to change the route selection one more time. You can
find additional information on route selection starting on
page 130.
Switch from the letter speller to the number speller to enter a city
with special characters (e.g. hyphen, apostrophe or period) page 125.
Selection “Select city center”
The Navigation System calculates route guidance to the center of
the city entered.
Selection “Input street name”
B y i n p u t t i n g t h e s t r e e t i n a c i t y, y o u c a n s p e c i f y t h e d e s t i n a t i o n m o r e
precisely.
After selecting the street, you can specify more detailed destination
criteria by inputting an Intersection, a House number or through
Enter destination on map
page 128.
If you would like to find a street independently of the city, select
Street after selecting the country in the destination entry menu.Selection “Special destination in city”
By selecting a special destination in the specified city, tourist attrac-
tions or public facilities (e.g. hospital, movie theater,) can be
selected directly as a destination.
If you would like to find a particular special destination indepen-
dently of the city, select Special destination after selecting the
country in the destination entry menu
page 126.
Selection “Destination input on map”
You can find destinations for a specified city from the map display.
If the map is being displayed to select a destination, the crosshairs
are in the center of the city in question. By moving the crosshairs
horizontally and vertically, you can set a new destination
page 149.
If additional detailed information is available for the selected point
on the map, you can display it using the Detail info function.
I f y o u a r e n a v i g a t i n g i n s i n g l e d e s t i n a t i o n m o d e , t h e Set as stopover
function is greyed out
page 139.
Yo u c a n a l s o Save to directory
page 135 the selected map destina-
tion
By inputting a street, you can predetermine the map location in
greater detail.
Tips


If you have entered a city in the speller display, you can confirm
the entry for this city by pressing and holding the control knob. Or,
y o u e n t e r p a r t o f a c it y a n d yo u a l re a d y r e c o g n i z e t h e d e s i re d c i t y i n
the speller display list, you can shift directly to the city list by
keeping pressure on the control knob.


Entered destinations can be saved
page 135.

Navigation (NAV)121
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Entering Route plan (Route with stopover)
Up to three stopovers and a final destination can be set
in the Route plan.Fig. 125 Navigation: Route plan– Press the function button
page 16.
– Press the control button with the Route function and
confirm the Route with stopovers function to switch to
Route plan
fig.125.
–Select Destin. to enter the final destination.
–Select Region as applicable
page 118.
–Select City and enter the city using the speller, or
– In the speller display, select LIST and select the city from
the list.– Select Select city center to navigate to the center of the
selected locality, or
– Select Input street name, Special destination in city or
Destination input on map to set more detailed destina-
tion criteria.
– Enter stopovers by means of Add stopover 1, Add
stopover 2 or Add stopover 3.
– Select Start route guidance
page 129.
After you have started route guidance, the calculated route plan
with all the various information is initially shown as an overview on
the map. Confirm route guidance by pressing the control knob. You
can find additional information about the route plan starting on page 132.
Switch from the letter speller to the number speller to enter a city
with special characters (e.g. hyphen, apostrophe or period) page 125.
Selection “Select city center”
The Navigation System calculates route guidance to the center of
the city entered.
Selection “Input street name”
B y i n p u t t i n g t h e s t r e e t i n a c i t y, y o u c a n s p e c i f y t h e d e s t i n a t i o n m o r e
precisely.
After selecting the street, you can set more detailed destination
criteria by entering an Intersection or a Street number
page 128.
NAV

Navigation (NAV)129
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Confirm by rotating and pressing the control knob the
third map menu item (destination flag)
page 128,
fig.133.
–Select Set as destination
page 128, fig.134.
– Geben Sie ggf. Enter stopovers for route guidance with
stopovers
page 139.
–Select Start route guidance
page 129.If you enter a city in the destination input menu first, before you
press the control button with the Map function, the system jumps
to the center of the city entered on the map display.
Selection “Detail info”
If additional detailed information is available for the selected point
on the map, you can display it by selecting the Detail info function.
If the Detail info function is greyed out, no details are available on
the navigation DVD.
Selection “Set as stopover”
When you have activated Route with stopover, you can also select
the stopovers from the map.
If you have not activated Route with stopover, this function cannot
be selected (greyed out).
Selection “Save to directory”
The selected map position can also be imported into the directory.
You can assign this position to an existing directory entry or open a
new entry. With a new entry, first input a name using the speller.
Then you can input additional data on the entry. If you activate
Display as top destination, this entry is displayed in the destination
input menu
page 117, fig.121
page 133.
Tips


Th e d e s t i n a t i o n e n t r y f r o m t h e m a p i s a l s o a v a i l a b l e t o y o u i n t h e
city submenu and street submenu.


Yo u c a n a l s o s e t a m a p p o i n t w h i c h i s not l o c a t e d o n a s t r e e t ( e .g .
by means of the geo-coordinates) using the crosshairs. In this case,
the system tries to navigate as close as possible to this destination
using digitized streets.
Start route guidanceFig. 135 Navigation: Start route guidance– Enter all the necessary information for route guidance.
You can use the different options that have been
described
page 117.

Navigation (NAV) 130
– Select Start route guidance
page 129, fig.135, the
route is calculated and the map display is shown auto-
matically.
– Select one of the routes suggested in the single destina-
tion mode
page 130 on the map display by rotating
and pressing the control knob.
– In the route plan map display, confirm the route
suggested
page 132 by rotating and pressing the
control knob.After calculating route guidance, the Navigation System switches
a ut o ma t i c a l ly to ma p d i s p l a y m o d e . The ro u t e g u id a n c e i s s h o w n in
simplified form in the instrument cluster display
page 113. You
are additionally receive navigation voice prompts page 112.
When you have entered a final destination
page 119 and started
route guidance, you are offered up to three different routes to reach
your destination
page 119.
When you have entered a route plan and started route guidance,
you are shown the route with the different stopovers and various
information in the overview
page 132.
Entered destinations can be saved
page 135 and
page 137.
Route criteria
page 141 can be changed at anytime during guid-
ance, and the route will be recalculated.
If you do not complete route guidance you started, this route guid-
a n c e wi l l b e c o n t i n u e d t he n e x t t i m e t h e v e h i c l e i s s t a r t e d . Th is a l s o
applies to destinations entered which cannot be reached because of
local conditions (e.g. lake or tourist attraction). If you would like to
terminate this route guidance, select Cancel route guidance
page 132
Tips
Calculated destinations can also be changed in the map display by
moving the crosshairs
page 149
Single destination information before route guidanceFig. 136 Navigation: Example of map display after route has been calculatedWhen you have entered the destination data
page 117
and the road network allows, you are offered up to three
different routes to choose from.
– Select one of the optional routes by rotating the control
knob.

Navigation (NAV)131
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the control knob to start the route guidance
desired.When you select a route by rotating the control knob, you are shown
various information about this route. The information that pertains
to the selected route is highlighted in white.
The following information can be displayed for the individual
routes.
Route guidance includes sections of freeway
Estimated freeway kilometers
Route includes sections of road subject to tolls or sticker
showing the length of the sections
Route includes ferry connection(s)
Route includes roads closed at certain times of day
Route includes seasonally closed roads
Estimated distance to destination
Estimated time of arrival at destination
Destination highlighted on map
Suggested route 1
Suggested route 2
Suggested route 3
Starting point highlighted
Orientation
Scale
When you have entered a single destination and started route guid-
ance, the system switches automatically to route selection display.
The route highlighted after the automatic switch to map display is
the route which was calculated according to the criteria
page 141
that you set. For e x ample, if you set “fast in the “Route criteria”, the
route with the shortest estimated arrival time is highlighted after switching automatically to the map display. You are also offered a
second fastest and a short route as a selection where possible.”
If you do not select any of the routes suggested, the route marked
is automatically imported after a delay once the trip has started or
during the trip. The delay gives you the opportunity to change the
route selection one more time.
Tips
The estimated time for the possible routes depends on the various
route options. As soon as the calculation is complete, these routes
are shown on the map display. In some cases, visual overlaps may
result, in which c ase the route ca n be distinguished vis ually on ly by
the change in the distance given or the estimated time of arrival.
A1AA3A4A5A6A7A8A9A10A11A12A13A14A15

Navigation (NAV) 138
– Select Load route
page 134, fig.140.
– Select the route that you would like to load from the list.
– Select Start route guidance.After storing several route plans
page 137, they can be loaded
with a few operating steps.
A route plan can be changed at any time. Select a destination from
the route plan by rotating and pressing the control knob. Then you
can select Change, Move, Delete or Drive to now.
Change
Here you are entering new navigation data for your destination or
stopover.
Move
Here you are reordering the sequence of your destination and stop-
overs.
Delete
The selected destination or stopover can be deleted. If you delete a
destination, the system will automatically select a stopover and
make that your new destination.
Drive to now
You can drive directly to the selected final destination or stopover.
If you do not want to ed it the saved route, the route will b e sa ved in
the memory when Start route guidance is activated and the current
vehicle location will be used as the starting point for navigation.
Tips
A function may not be selected (“greyed-out”) if it is not available
according to the restrictions you have set, or if not permitted by
local circumstances.Delete route–Press the Memory control button in the navigation menu.
– Select Delete route.
– Select the route to be deleted from the list.
–Confirm Are you sure you want to delete the route? with
Ye s. The selected route is deleted.

Navigation (NAV)139
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Route control buttonRoute with/without stopoverFig. 145 Navigation: Route with stopoverFig. 146 Navigation: Route plan
Only the type of route guidance which is not active at the
time is shown in the display as available.
–Press the Route control button in the navigation menu.
– If you would like to visit stopovers on the way to your
final destination, select Route with stopover
fig.146
and enter your driving route with stopover and destina-
tion addresses into the Route plan
page 121.
– If you want the Navigation System to take you to your
final destination without stopovers, select Route without
stopover and enter the address of your destination

page 119.The system operates with the type of route guidance you selected
until it is changed. For example, if you have selected Route with

Navigation (NAV) 142Av o id ro u t eYou can select this function once calculated route guidance
is active.
–Press the Route control button in the navigation menu.
– Select Avoid route from here
page 139, fig.145.
– By rotating and pressing the control knob, select the
section on the presently calculated route from the
vehicle position.
– By pressing the control knob, you confirm the section
you wish to avoid.The Navigation System will calculate an alternative route for the
section of the route you wish to avoid.
If you stop route guidance and restart it, the blocked out section
entered is cancelled and has to be reset if required.
Tips


If the Avoid route from here fun ction is greyed out or the Na vig a-
tion System does not calculate an alternate route, local conditions
are making this impossible.


If the recommended detour route is not followed, the system
automatically calculates a new route from the current position
without given further consideration to the previously closed
section.
Map control buttonGeneral
There are various displays for maps and information
with different options possible.Fig. 149 Navigation: Map display with an IPD areaPossible map displays are:

Map and information display during route guidance with inac-
tive side menu
page 143.


Map display with active side menu
page 144
If light grey lines
fig.149 are shown on the map display, this
means that IPD sections/areas are being shown. IPD means “in-
progress-data”, i.e data collection is incomplete and consequently
they cannot be included for route guidance. These IPD
sections/areas are on the Navigation DVD and are represented on

Navigation (NAV)143
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP the map by light grey lines
f i g .1 4 9 . Th e r e i s n o r o u t e g u i d a n c e f o r
IPD sections, instead you are guided by directional arrows
fig.149. These directional arrows point in the compass direc-
tion/a direct line to the destination.
I f y o u s h o u l d b e s t a r t i n g y o u r r o u t e g u i d a n c e i n a n I P D a r e a , y o u w i l l
initially be guided by directional arrows. As soon as you leave the
IPD area, route guidance will start . In
page 142, fig.149 an
example is shown of a directional arrow in an IPD area.
If your destination should lie in an IPD area, the Navigation System
will guid e you up to the star t of the IPD area. In the IPD area you will
be guided by directional arrows.
If your route guidance includes an IPD area, you will be advised of
this by a voice message when route guidance starts (“It is possible
that there a re un fore seen tra ffic reg ulations on the way to the des ti-
nation.”).
Tips
Route guidance is additionally shown by directional arrows in the
instrument cluster display
page 113 or
page 114. In an IPD
area, the directional arrows in the instrument cluster display point
in the compass direction/a direct line to the destination.
Map and information displayFig. 150 Navigation: Example of map display with inactive side menu
Fig. 151 Navigation: Example of map display with activated turn list
A
A1