set clock AUDI S3 2008 8P / 2.G Quick Reference Guide

Downloaded from www.Manualslib.com manuals search engine Page 3
© 2006 AUDI AG
AUDI AG reserves the right to alter any part of the vehicle, its equipment and technical specifications. No legal commitment can be implied by the information, illustrations or
descriptions in this publication. No part of this publication may be reprinted, reproduced or translated without the written permission of AUDI AG. All rights under the laws of copy-
right are expressly reserved by AUDI AG. Subject to alteration and amendment. Printed in Germany. Concept and layout: Pfriemer GmbH.
1Instruments
22
34
6108
97
22
51
Instruments
e
Rev counter
rWarning and indicator lamps
tCoolant temperature gauge
uFuel gauge
iSpeedometer
oMileage recorder
Trip recorder (top)/Total mileage (bottom)
pControl button:
p To reset the trip recorder
Press the control button until the display is reset to zero.
p To check distance to next service
Pull the control button briefly, when the vehicle is stationary and
the ignition is switched on.
aDisplay for driver information system:
pDriver messages
p Warning symbols and auto-check control
p Radio, CD and telephone
p Outside temperature p
On-board computer (with two memories)
p Navigation system
p Service interval display
p Lap timer
sControl button:
pTo check the auto-check control display
Press the button once with the ignition on.
p To call up driver messages
Press the button when a warning symbol lights up.
p To set speed warning 1
Press the button briefly when the desired speed is indicated
on the speedometer. To clear the speed limit, press the button
for at least 1 second.
p To set the digital clock/date
Keep pulling the button briefly until the desired display appears.
Turn the button to alter the time/date.
dDigital clock and date display/outside temperature display