lock AUDI S4 1995 B5 / 1.G 01E Transmission Drive Pinion And Hollow Shaft Assembly Workshop Manual

35-19


17 -
Synchro-hub for 1st and 2nd gear
Pressing off Fig. 12Pressing on Fig. 13Installation position: flush hub towards 2nd
speed sliding gear
18 -
Circlip Removing and installing Fig. 11Re-determining Fig. 8
19 -
Washer
Removing and installing Fig. 11
20 -
Locking collar for 1st and 2nd gear
Installation position: splines for reverse
gear towards synchro-ring for 2nd gear
21 -
Synchro-ring for 1st gear Checking for wear Fig. 2 , Page 35
-9
Pa
ge 8 of 21 Drive
pinion and hollow shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.35.2

35-29


Fig. 11 Removing and installing circlip for synchro-hub and shim
for 1st speed sliding gear
- Removing: take off shim -A- then circlip -B-.
- Installing: fit circlip -B- then shim -A-.

Note:
Do not press off together with 1st speed sliding gear and inner race for
small tapered roller bearing. Fig. 12 Pressing off 2nd speed sliding gear with synchro-hub for
1st and 2nd gear
- Take off locking collar for 1st and 2nd gear and synchro-ring for 1st
gear.
- Remove shim and circlip for synchro-hub.
- Press off 2nd speed sliding gear together with synchro-hub for 1st and
2nd gear.
Pa
ge 18 of 21 Drive
pinion and hollow shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.35.2