torque AUDI S4 1995 B5 / 1.G 01E Transmission Final Drive Pinion Adjustment Workshop Manual

39-40

Clamping sleeve 3116
Bolt 3116/1
Torque gauge 0-600 Ncm
Dial gauge
Dial gauge extension 6.5 mm
Dial gauge extension 30 mm
Pa
ge 3 of 16 Drive
pinion, ad
justin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.7

39-51

Measuring friction torque (check)

Note:

Drive pinion/hollow shaft tapered roller bearings
are low friction bearings. Therefore the frictional
torque has only a limited use as a check.
Correct adjustment is only possible by
determining the total shim thickness "S
total
."

Do not additionally oil new tapered roller
bearing to perform the frictional torque
measurement. These bearings have already
been treated with a special oil by the
manufacturer.

Frictional torque specification: - Fit torque gauge 0-600 Ncm -A- onto drive pinion.
B - Socket
- Insert tensioning sleeve 3116.New bearings
Used bearings
80-150 Ncm 30-60 Ncm
Pa
ge 16 of 16 Drive
pinion, ad
justin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.7