tow AUDI S4 1998 B5 / 1.G 01E Transmission Input Shaft Assembly Workshop Manual
Page 5 of 12
35-5
14 -
Spring pin
Drive in when replacing input shaft Fig. 7
15 -
Bearing plate
Servicing Page 34
-112
16 -
Inner race for cylinder roller bearing
Take off and fit by hand
17 -
Circlip
18 -
Thrust washer for needle bearing for 6th
gear Installation position: shoulder towards
circlip, smooth contact surface towards
needle bearing Page 34
-75
Pa
ge 5 of 12 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.35.1
Page 6 of 12
35-6
19 -
Needle bearing for 6th gear
Oil with gear oil before installing
20 -
6th speed sliding gear Before installing, insert spring Fig. 1After installing, check axial clearance with
a feeler gauge (0.15-0.35 mm)
21 -
Synchro-ring for 6th gear Check for wear Fig. 2
22 -
Synchro-hub for 5th and 6th gear
Pulling off Page 34
-64
Driving on Page 34
-76
Installation position: projecting hub towards
5th speed sliding gear
Pa
ge 6 of 12 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.35.1