AUDI S4 1998 B5 / 1.G 01E Transmission Layout Workshop Manual

00-7


Transmission layout Note:
Arrows point in forward direction of travel. 1 -
Engine
2 -
Clutch
3 -
Transmission
4 -
Input shaft (main shaft)
5 -
Front differential
6 -
Front drive pinion (output shaft)
7 -
Hollow shaft
8 -
Torsen differential
9 -
Driveshaft
10 -
Rear drive pinion
11 -
Rear differential
Pa
ge 1 of 3 Transmission la
yout
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.00.3

00-8


Note:
Arrows point in forward direction of travel. I - 1st gear
II - 2nd gear
IlI - 3rd gear
IV - 4th gear
V - 5th gear
VI - 6th gear
R - Reverse gear
A1 - Front final drive
A2 - Rear final drive
T - Speedometer drive, electronic
Pa
ge 2 of 3 Transmission la
yout
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.00.3

00-9

Notes for performance test, brake test
and tow starting/towing


Performance test on roller type test stand
The following must be noted when a vehicle with
all wheel drive is to be driven onto a performance
test stand:

A four wheel test stand with four braked rollers
must be used.

Brake test on the roller type test stand
The following must be noted when a vehicle with
all wheel drive is to be driven onto a roller type
test stand:
A slow moving brake test stand (to 5,5 km/h)
must be used. During this, no gear may be
selected.

Tow starting and towing vehicles

Repair Manual, Maintenance

Pa
ge 3 of 3 Transmission la
yout
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.00.3