jump start terminals AUDI S8 2014 Owners Manual

_& WARNING
California Proposition 65 Warning:
- Battery posts, terminals and related ac­ cessories contain lead and lead com­
pounds, chemicals known to the State of
Californ ia to cause cancer and reproduc ­
t ive p roblems. Wa sh hands afte r han­
dling.
(D Note
- Do not d isconnect the ve hicle battery
when the ignition is on or when the en ­
gine is running, otherwise, you will dam­
age electron ic components in the elect ri­
cal system .
- If yo ur vehicl e is going to stand for a
l ong pe riod of time wi thout bei ng d riven,
protect the battery from "free zing", oth­
e rwise it wil l be damaged and w ill then
have to be replaced.
Battery charging
Starting the engine requires a well charged
battery.
F ig. 206 Eng ine co mpartment : c o nnecto rs fo r a charg ­
er and ju mp sta rt cab les
Alway s read and heed all WARNINGS be low
¢ &. and
¢&. in Working on the ba ttery on
page 24 4.
• Switch off th e ignit ion and a ll electrica l con­
s u mers.
• M ake sure the are a is well vent ilated when
yo u charge the bat tery.
• Open the engi ne hood
¢ page 231.
• Remove the cover@ by press ing o n the ar­
row
¢ fig . 206.
Checkin g and fillin g 245
• Open the cover @on the pos itive termina l.
• Connect the charge r co nnectors accord ing to
the instruct ions to the
jump sta rt bolts.
(Bo lts under the red cover = "posit ive", Bo lts
w ith hex head= "negative") .
• On ly now plug the mains lead for the charg ­
ing equ ipment into the wall outlet and tu rn
iton ¢_& .
• Make sure the charging rate is not over
30 amps /14.8 Volt .
• W hen the bat tery is fully c harged: T urn the
charg ing equipment off and remove the
mains lead from the wa ll out let.
• Now remove the clamps for the charging
equ ipment .
• Close the red cover on the positive pole.
• Close the hood ¢
page 232.
A discharged battery can freeze at tempera­
tures of only 32 F
0 (0 °C). Allow a frozen bat­
tery to thaw completely before attempting to
charge it ¢ ,&. . However, we recommend not
u s ing a thawed batte ry aga in because th e ba t­
te ry casing can be c racked due to i ce fo rma­
t ion an d can leak ba ttery a cid.
Battery charging (Maximum charging rate
of 30 amps/14.8 Volt )
When charg ing at low vo ltages (e.g. wi th a
trickl e charger ), the ba tte ry cables do no t
have to be dis conne cte d firs t. T he bat tery
caps should
not be opened when charg ing a
batte ry .
I t i s no t ne cessa ry to remove the battery from
t he luggage compartmen t, a nd it is a lso not
necessary to d iscon nect the cab les.
Fast charging the battery (charging rate
above 14 .8 Volts)
Fo r tec hni ca l re asons do not use a battery
c h arger that uses voltage g reater than 14.8
Volts to charge yo ur vehicle's battery.
A WARNING
Charging a battery can be dangero us.
-Always follow the operating instructions
provided by the battery charger manu­
facturer when charging your battery.

284 Emergency situations
@ Tips
-The discharged battery must be properly
connected to the vehicle's electrical sys­
tem. When jump starting or charging the
battery, never connect the negative
ground cable to the battery negative
post because the battery manager sys­
tem must be able to detect the battery's
state of charge . Always connect the neg­
ative ground cable to the negative
ground post of the battery manager con­
trol unit.
Use of jumper cables
Make sure to connect the jumper coble
clomps in exactly the order described below!
Fig . 233 Engine co mpartment: connecto rs fo r jump
star t cab les and c harg er
Fig. 234 Ju m p sta rt in g w it h the ba ttery of anot her ve ­
h icle :@ - booster battery, @-discharge d ve hicle bat­
tery
The procedure described below for connecting
jumper cables is intended to provide a jump
start for your vehicle.
Vehicle with discharged battery:
•Turnoff lights and accessories, move lever
of automatic transmission to N (Neutral) or
P (Park) and set parking brake.
Connect POSITIVE(+) to POSITIVE(+)
(red)
• Open the red cover on the pos itive terminal
¢ fig. 233 .
1. Connect one end of the red positive cable
on the
jump start bolt c::;, fig. 234 @ (bolt
under the red cover = "positive ") of the ve ­
hicle to be started @.
2. Connect the other end to the positive ter-
mina l@ of the booster battery@.
Connect NEGATIVE (-) to NEGATIVE (-)
(black)
3. Connect one end of the black negative ca­
ble to the negat ive terminal @ of the
booster battery @.
4. Connect the other end to the
jump start
pin © (bolts with hex head bolt= "nega­
tive") of the vehicle to be started @.
Starting the engine
• Start the engine of the veh icle w ith the
booster battery@. Run the engine at a
moderate speed.
• Start engine with discharged vehicle battery
@ in the usual manner.
• If the engine fails to start, do not keep the
starter cranking for longer than 10 seconds.
Wait for about 30 second s and then try
aga in.
• With engine running, remove jumper cables
from both vehicles in the exact
reverse o r­
de r.
• Close the red cover on the positive term inal.
T he battery is vented to the outside to prevent
gases from entering the veh icle inter ior. Make
sure that the jumper clamps are well connect­
ed with their metal parts in full contact with
the battery terminals.
_& WARNING
To avoid serious personal injury and dam­
age to the vehicle, heed all warnings and
instructions of the jumper cable manufac­
turer. If in doubt, call for road service.
- Jumper cables must be long enough so
that the veh icles do not touch.
-