check engine light AUDI S8 2015 User Guide

Page 90 of 312

88 On the road
switched off. More force is required to
stop and to steer the vehicle.
- To reduce the risk of injuries, make sure
that the Start-Stop-System is turned off
when working in the engine compart­
me nt¢
page 89.
(D Note
Always switch off the Start-Stop -System
when driving through water ¢
page 89.
Starting/stopping the engine
Applies to vehicles: with Start-Stop-System
Fig . 91 In strument duster : eng ine switc hed off (stop
phase)
~ Slow the vehicle to a stop using the brake
and keep pressing the brake pedal. The en­
gine w ill switch off. The
11] indicator light
appears in the information line in the instru­
ment cluster display.
~ When you take your foot off the brake ped­
al, the engine restarts . The ind icator light
turns off.
Additional information
The engine w ill switch off in the P, D, N and S
positions as well as in manua l mode. In the P
position, the e ngine will also remain off if you
take your foot off the brake pedal. The engine
starts again when you select another se lector
lever position and take your foot off the brake
pedal.
If you select the R position during a Stop
phase, the engine will start again .
Shift from D to P quickly to prevent the engine
from starting unintentionally when shifting
through R. You
can determine for yourself if the engine
will stop or not by reducing or increasing the
amount of force you use to press the brake
pedal. For example, if you only lightly press
on the brake pedal in stop-and and-go traffic
or when turning, the engine will not switch off
when the vehicle is stationary. As soon as you
press the brake down harder, the engine wi ll
switch off.
General information
Applies to vehicles: with Start-Stop-System
The standard Start-Stop-mode can be cancel­
led for different system-related reasons.
Fig. 92 Instrument cluster: eng ine -Stop temporarily
unavailable
Engine will not switch off
Before each stop phase, the system checks if
certain conditions have been met. For exam­
ple, the eng ine will
not be switched off in the
following situations:
- The engine has not reached the minimum
requ ired temperature for Start-Stop-mode.
- The interior temperature selected by the A/C
system has not been reached.
- The outside temperature is extremely high/
low.
- The windshield is being defrosted
¢page 81.
-The parking system* is switched on.
- The battery charge level is too low.
- The steering wheel is sharply turned or
there is a steering movement.
- After engaging the reverse gear.
- On sharp incl ines.

Page 201 of 312

rl N
rl N
0 J:
"". rl I.O
"' rl
"' ......
@ Tips
-ABS and AS R on ly wor k co rrectly when
a ll fo ur wheels are eq uipped w ith identi­
ca l tires . Different tire s izes can lead to a
r educt io n in eng ine power.
- You may hear noises when the sys tems
desc ribed are working.
Switching on and off
Intelligent technology 199
- If
the ind ica tor li ght &J or m] (US A
mode ls)/ ri] (Ca nada models) ap pears,
t h ere may be a malfunction
c::> page 19,
¢ page 18.
ESC turns on automatically when you start the engine.
Fig . 188 Center co nsole with ESC O FF bu tton
ESC levels
Sport mode on
The following si tua tions are exceptions whe re
it may be usefu l to switch o n sport mo de to
allow the w heels to spi n:
- Rockin g the vehicle to free it when i t is st uck
- Dr iv ing in deep s now o r on loose g ro un d
- Dr iving with snow chains
Sport mode off
Behavior
T he E SC and AS R sta bilization f unct io ns The fu ll sta biliz ati on f uncti on o f the ES C
are limited ¢,& .
Operation Press the [ru button .
Indicator • tur ns on.
lights
Driver mes· Stabilization control (ESC): Sport
sages Warning! Reduced stability
A WARNING
Yo u should o nly sw itch sport mo de on i f
your dr iv ing abili ties and road cond itions
permit.
- The stabilization function is limited
when sport mode is sw itched on. The
dr iv ing whee ls co uld spin and the vehicle
cou ld swe rve , especially on slick or slip ­
pery road surfaces .
(D Tips
Sport mode cannot be switched o n when
adapt ive cr uise c ontrol* is sw itched on.
-
and AS R is availab le again .
Press the
[ru button again .
II turns off .
Stabilization control (ESC): On
Braking
General information
What affects braking efficiency?
Operating conditions and driving habits
The bra ke s on today's au to m obiles a re s till
sub ject t o wear, depe nding la rgely o n ope rat ­
i ng con dit ions and d riving habits ¢
A. On
vehicles that are either driven most ly in stop­
and-go city traff ic or are driven hard , the
brake pads should be checked by your author­
ized Audi dealer more often than specif ied in
t h e
Warranty & Maintenance booklet . Failure .,._

Page 213 of 312

.... N .... N
0 J:
'SI: .... \!) 1.1'1
.... 1.1'1 ,....,
Trailer load distribution Be sure the load in the trailer is held securely
in place to prevent it from shifting forward,
backward or sideways.
Never allow a passenger to ride in a trailer
¢ .&. in Driving instructions on page 212.
Engine cooling system
Towing a trailer makes the engine work hard ­
er . It is important that the cooling system's
performance is up to the additional load .
Make sure that the cooling system has enough
fluid.
Tire pressure
When towing a trailer, inflate the tires of your
vehicle to the cold tire pressure listed under
"Full load" on the label located on the driver's
side B-pillar (visible when the door is open).
Inflate trailer tires to trailer and tire manufac­
turers' specifications.
Lights
Check to make sure both vehicle and trailer
lights are working properly.
Safety chains Be sure trailer safety chains are properly con­
nected from the trailer to the hitch on the ve­
hicle . Leave enough slack in the chains to per­
mit turning corners . When you install safety
chains, make sure they will not drag on the
road when you are driving.
The chains should cross under the trailer
tongue to prevent it from dropping in case of
separation from the hitch .
Adjusting the Audi drive select Make sure the vehicle is on a level surface
be­
fore
hitching up the trailer and before adjust ­
ing the tongue weight. The vehicle must be in
auto or comfort driving mode and not raised
¢page 108, ~CD .
Make sure that the vehicle is lowered. In Info ­
tainment, select:
ICARI function button> low­
er control button .
Trailer towing 211
If you must drive under poor road conditions,
you can raise the vehicle
after coupling the
trailer or
after adjusting the tongue weight
¢ page 110.
@ Note
- Changes in temperature or load can af­
fect the height of the vehicle.
- Always select auto or comfort mode.
Otherwise, the tongue load specified for
your vehicle will no longer be applicable.
Driving instructions
Driving with a trailer always requires extra
core and consideration.
To obtain the best possible handling of vehicle
and trailer, please note the following:
.,. Do not tow a loaded trailer when your car it­
self is not loaded .
.,. Be especially careful when passing other
vehicles.
.,. Observe speed limits.
.,. Do not drive at the maximum permissible
speed .
.,. Always apply brakes early .
.,. Monitor the temperature gauge.
Weight distribution
Towing a loaded trailer with an empty car re­
sults in a highly unstable distribution of
weight. If this cannot be avoided, drive at very
low speeds only to avoid the risk of losing
steering control.
A "balanced" rig is easier to operate and con­
trol. This means that the tow vehicle should be loaded to the extent possible and permissi­
ble, while keeping the trailer as light as possi­
ble under the circumstances . Whenever possi­
ble , transfer some cargo to the luggage com­
partment of the tow vehicle while observing
tongue load requirements and vehicle loading
considerations .
Speed
The higher the speed, the more difficult it be­
comes for the driver to control the rig. Do not .,.

Page 230 of 312

228 Checking and filling
Checking and filling Engine hood
Releasing the engine hood
The engine hood is released from inside the
vehicle .
Fig. 197 Driver foo twell: release lever
Fig. 198 Rocker switch un der the hood
Make sure the wiper arms are not raised up
from the windshield. Otherwise the paint
could be damaged.
.,. Pull the lever under the instrument panel in
the direction of the arrow
¢ fig. 197.
.,. Raise the hood slightly¢,&. .
... Press the rocker switch under the hood up­
ward ~
fig. 198. This releases the catch.
• Open the hood.
&_ WARNING
Hot engine coolant can burn you.
- To reduce the risk of being burned, never
open the hood if you see or hear steam
or coolant escaping from the engine compartment . Wait until no steam or
coolant can be seen or heard before care­
fully opening the hood .
'Working in the engine compartment
Be especially careful whenever you work in
the engine compartment.
Whenever you must perform any work in the
engine compartment, for example checking
and filling different fluids, there is a risk of injury, burns and accidents. To prevent per­
sonal injury always observe the following
WARNINGS. The engine compartment of any
vehicle is a hazardous area
¢ ,&. .
A WARNING
To help avoid injury, before you check any­
thing under the hood:
- Turn off the engine.
- Switch off the ignition .
- Apply the parking brake.
- Move selector lever to "P" (Park) .
- Always let the engine cool down. Hot
components will burn skin on contact.
- To reduce the risk of being burned, never
open the hood if you see or hear steam
or coolant escaping from the engine
compartment. Wait until no steam or
coolant can be seen or heard before care­
fully opening the hood.
- Keep children away from the engine com­
partment.
- Never spill fluids on hot engine compo­
nents . They can cause a fire .
- Never touch the radiator fan. The auxili­
ary electric fan is temperature controlled
and can switch on suddenly .
- Never open the coolant reservoir cap
when the engine is still warm . The cool­
ant system is pressurized and hot cool­
ant could spray out.
- Protect your face, hands and arm from
steam or hot engine coolant by placing a
thick rag over the cap when you open the
coolant reservoir.
- Do not
remove the engine cover under
any circumstances. This increases the
risk of burns.
- If work on the fuel system or the electri­
cal system is necessary:

Page 233 of 312

,....,
N ,....,
N
0 J:
'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
(!) Windshield/headlight washer
t .
(~ ) con ainer ,..., .. .... ... .. .. . 244
@ Jump start point( -) with hex
h ead screw ............... .. 242, 281
® Jump start point( +) under a cov-
er . ..... .. ... .. ..... ... .. . 242, 281
@ Engine oil filler cap(~) . . . . . 234
® Brake fl uid reservo ir ((0)) . . . . . 239
® Coolant expansion tank (-L) . . . 237
0 O il dipstick . . . . . . . . . . . . . . . . . 234
The engine oil filler neck (item @) may be lo­
cated in a different area depend ing on the ver­
sion of the eng ine .
A WARNING
Before yo u check anything in the engine
compartment, always read and heed all
WARN INGS
Q .&. in Working in the engine
c ompartment on page 228.
Engine oil
Engine oil specifications
The engine oil used in your Audi needs the
right kind of oil .
-
The engine in your Audi is a sophisticated
powerp lant that was b uilt to exacting specifi ­
cations . This engine needs the right kind of
engine o il that meets specificat ions regarding
q ua lity and viscos ity so that it can run
smoothly and reliably . Choos ing the right oil
and changing oil within the time and mileage
in terva ls pr inted in your veh icle's War ranty
&
M aintenance book let matters a lot more to­
day than i t did yea rs ago . Audi has developed
a special quality s tanda rd fo r engine oil th at
will he lp assure that your veh icle's eng ine will
get the lubrication it needs for prope r opera ­
tion .
M odern eng ine lubrica tion has taken a qu an­
tum leap in the last few years . Many synthetic
oils ava ilable today provide better engine lu­
brication that can outlast traditional petrole­
um-based o ils, making them a smart choice
for use throughout the life of your A udi.
Checkin g and fillin g 231
Whether you use synthetic o r petro le um­
based engine oil, the oil that you use m ust
conform to Aud i's oi l quality standard
VW 502 00 (vehicles with gasoline engine) or
VW 507 00 (vehicles w it h diesel eng ine) to
help keep your veh icle's engine ru nning
smoot hly and he lp prevent the format io n of
harmful deposits, sometimes ca lled "s ludge, "
t h at over time can lead to expensive repairs.
At the time of printing, engine oils ava ilab le i n
t h e U.S . and Canada that meet the exac ting
specifications of Audi oil standard VW 502 00
(ve hicl es w ith gasoline engine) o r VW 50 7 00
(ve hicl es w ith diese l engi ne) are synthet ic en ­
gine oi ls. Th is does not mean, howeve r, that
every synthetic engine oil will meet A udi oi l
standard VW 502 00 (vehicles with gasoline
engine) or VW 507 00 (vehicles with d iesel
engine). So always be sure that you use an ap­
proved o il.
To he lp prevent the formation of harmfu l de­
pos its use on ly oil with the following specifi­
cations pr inted on the o il conta iner:
- Audi oil standard VW 502 00 (gasoline en­
gine )
- Audi oil standard VW 507 00 (diesel en-
gine )
Oil containe r labels may car ry the spe cifica­
tion sing ly or in combination wi th other desig­
nations and oil quality s tanda rds .
Viscosity
Engine o ils are graded accord ing to their vis­
cosity . The proper viscos ity grade oil fo r your
engine depends o n climactic or seasona l con­
ditions where you d rive. You ca n use o il wit h a
vis cosity gr ade of SA E SW40 across all tem ­
pera ture ranges for norma l driv ing con ditions.
Howeve r, if engine oil v iscos ity grade SA E
SW40 is not available, you can a lso use v iscos­
i ty grade SA E SW -30 or SA E OW -40 as long as
i t meets Aud i oil q ua lity standard VW 502 00
(ve hicles w ith gasoline engine) o r VW 5 07 00
(ve hicles w ith diese l engine) specifications.
Be cause eng ine o il that mee ts the Audi o il
standard may no t be availab le everywhere

Page 235 of 312

,....,
N ,....,
N
0 J:
'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
Engine oil consumption
The e ngine in your vehicle dep ends on an ade ­
quate amount of oil to lubricate and cool all
of its m oving parts .
In order to provide effective l ubrication and
cooling of internal engine components, all in­
ternal combustion eng ines consume a certain
amo unt of o il. O il cons umption varies from
engine to eng ine and may c hange significant ly
over the li fe o f the eng ine . T yp ica lly, eng ines
with a specified break -in per io d (see
¢
page 205) cons ume more oi l during the
b reak-in period than they consume after oil
consumption has stabilized.
Unde r norma l conditions, the ra te of oil con ­
sumption depends on the quality and viscosity
of the oi l, the RPM (revo lutions per minute) at
which the eng ine is operated, the ambient
temperature and road condit ions. Further fac­
tors are t he amount of oil d ilution from wate r
condensation or fuel residue and the ox ida ­
t ion level of the o il. As any engine is subject to
wear as mileage bu ilds up, the o il consump­
tion may in crease over t ime un til re p la cement
of worn componen ts may become necessa ry.
W ith all these var iabl es com ing in to play, no
standa rd rate of o il cons umption can be es­
t a blishe d or specifie d. T he re is no a lterna tive
t o regular and freq uen t ch ecking of the oi l lev­
e l, see
Note .
If the ye llow eng ine o il level war ning symbol
in t he ins trumen t clus te r
II light s up, yo u
should che ck t he o il level as soon as possible
¢
page 233 or ¢ page 23 4. Top off t he oil at
your ea rliest convenience ¢
page 234.
A WARNING
Before yo u check anything in the engine
compartment, always read and heed all
WAR NINGS
¢ .&. in Working in the engine
compartment on page 228.
Dr iving with an insufficient oi l level is like­
ly to ca use seve re damage to the eng ine.
-
Checkin g and fillin g
(D Tips
- The oil pressure warning display. is
not an indicator of the oil level. Do not
rely on it. Instead, check the oil level in
your engine at regular intervals, pref­
erably each time you refuel, and always
before going on a long trip .
-If you have the impressi on yo ur engi ne
cons umes excess ive amounts of oil, we
recommend that you consult your Aud i
dea le r to have the cause of your concer n
properly diagno sed . K eep in mi nd th at
t he a ccu rate meas urement o f oil con ­
sumption requi res g reat care and may
take some t ime . Your Audi dea le r h as i n­
struct io ns about how to measure oil con­
sumption acc urate ly.
Checking the engine oil level
App lies to vehicles : wit h oil level indicator
Fig. 201 D isp lay: o il leve l indicator
.,. Par k yo ur vehicle o n a level su rface.
.,. Shu t the eng ine off when it is warm.
.,. Switch on ly the ignition back on.
.,. Wa it app roximately two minutes .
.,. Select:
!CAR ! functio n button > Car systems
cont ro l button > Servicing & checks > Oil
level.
.,. Check t he oil level i n the display ¢ fig. 201.
Add eng ine o il if the bar of the oil leve l ind i­
cato r is nea r "m in"¢
page 234 .
Depending o n the way the vehicle is dr iven
and the ope rat ing cond it ions, o il cons umption
can be up to 1/2 quart per 600 miles (0 .5 liter
per 1,000 km). Consumption may b e hig he r
within the first 3, 000 miles (5 ,0 00 km). ..,,.
233

Page 239 of 312

,....,
N ,....,
N
0 J:
'SI: ,...., \!) ..,.,
,...., ..,., ,....,
Checking the engine coolant level
The engine coolant level can be checked with
a quick glance .
Fig. 204 Eng ine compartme nt: cover o n the coolant
expansion tank
Before you check anything in the engine com­
partment,
a lway s read and he ed all WARN ­
INGS ¢ & in Working in the engine compart­
ment on page 228.
Park your vehicle on a level surface.
~ Switch off the ignition.
~ Read the engine coolant leve l from the cool­
ant expansion tank¢
fig. 204, ¢ page 230.
With a cold engine, the coolant level should
be between the "min" and "max" markings.
When the engine is warm, the level may be sl ightly above the ''max" marking.
The location of the coolant expansion tank
can be seen in the engine compartment illus­
tration ¢
page 230 .
To obtain an accurate reading, the engine
must be switched off.
The expansio n tank in your vehicle is equipped
with an electric coolant level sensor.
When t he coo lant level is too low, the warning
light in the Auto-Check System¢
page 15 will
illuminate unti l yo u add coolant and the level
has been restored to normal. Even thoug h
there is an electric coolant level sensor, we
still recommend you check the coolant level
from time to time.
Coolant loss
Coolant loss may indicate a leak in the cooling
system. In the event of coolant loss, the cool-
Checkin g and fillin g 237
ing system shou ld be inspected immediately
by your authorized Audi dealer . It is not
eno ugh merely to add coo lant .
In a
s ealed system, losses can occu r on ly if
the boiling point of the coo lant is exceeded as
a resu lt of overheating.
A WARNING
The cooling system is under pressure and
can get very hot. Red uce the risk of scald­
ing from hot coolant by follow ing these
steps.
- Turn off the engine and allow it to cool
down.
- Protect your face, hands and arms from
escaping flu id a nd steam by cover ing the
cap with a la rge, th ick rag.
- Turn the cap slowly and very carefully in
a counter-clockwise d irect ion while ap­
p lyi ng lig ht, dow nward pressure on the
top of the cap.
- To avo id being burned, do not sp ill anti­
freeze o r coolan t on the exhaust system
or ho t engine parts. Und er certa in cond i­
tions, the ethylene gly co l in engine coo l­
an t can catch fire.
(D Note
Do not add any type of radiator leak sea l­
ant to your veh icle's engine coo lant. Add­
i ng radia to r repa ir flui d may adverse ly af­
fe ct the fun ct io n and perfor man ce o f you r
coo ling system and could result in damage
not cove red by your New Vehicle Limi ted
War ranty.
Adding coolant
Be very careful when adding engine coolant .
Before you che ck a nyt hing in the eng ine com­
partmen t,
alway s re ad and he ed alt WARN­
INGS ¢ & in Working in the engine compart­
ment on page 228.
~ Requirement: There must be a residua l
a mo unt of coolan t in the expansion ta nk
¢(D.
~Tu rnoff the engine . •

Page 240 of 312

238 Check ing and filling
• Let the engine coo l down .
• Place a thick rag over the coolant expansion
tank
¢ page 237, fig . 204 and care full y
twist the cap counter-clockwise¢ _&..
• Add coolant mixed in the correct ratio
¢
page 236, Coolant up to the MAX mark­
i ng.
• Make sure that the fluid level rema ins sta-
ble. Add more coolant if necessary.
• Twist the cap on again
tightly.
Replacement engine coolant must conform to
exact specifications ¢
page 236, Coolant.
We recommend using only coolant additive
G12++, G13 or in an emergency G12+ . Do not
use a different additive . In an emergency use
p la in water unt il you can get the correct add i­
tive and can restore the correct ratio. This
should be done as soon as possible .
If you have lost a considerable amount of
coolant, then you should add co ld antifreeze
and cold water only when the engine is co ld.
Always use
new eng ine coolant when refilling .
Do not fi ll coolant above the "MAX" mark. Ex­
cess coolant will be forced out through the pressure relief valve in the cap when the en­
g ine becomes hot .
A WARNING
- T he coo ling system is under p ressure and
can get very hot. Reduce the risk of
scalding from ho t coolant by following
these steps.
-Turn off the eng ine and a llow it to cool
down.
- Protect your face, hands and arms from escaping flu id and steam by cover ing
the cap with a large, thick rag.
- T urn the cap slowly and very carefully
in a counter-clockwise d irect ion while
apply ing light, downward pressure on
the top of the cap.
- To avo id being burned, do not sp ill an­
tifreeze or coolant on the exhaust sys­
tem or hot engine parts . Under certa in cond
it ions, the ethylene g lycol in en­
gine coolant can catch fire.
- Antifreeze is poisonous . A lways store an­
tifreeze in its origina l container and well
out of the reach of children.
- If you dra in the coo lant, it must be
caught and safely stored in a proper con­
tainer clearly marked "po ison".
@ Note
- Do not add coolant if the expansion tank
is empty. Air co uld enter the cooling sys­
tem and damage the engine. If this is
the case, do not cont inue driving. Seek
professional assistance .
- Coo lant pollutes the environment and
cou ld cause an engine f ire. Excess cool­
ant will be forced out through the pres­
sure relief valve in the cap when the en­
gine becomes hot.
- If, in an eme rgency, only wate r can be
added, the co rrect ratio between water
and antifreeze ¢
page 236 must be re­
stored as soon as possible.
@ For the sake of the environment
D rained coolant should not be reused . Al­
ways d ispose of used coolant while observ­
i ng all envi ro nmental regula tions.
Radiator fan
The radiator fan switches on automatically by
itself
The rad iator fan is driven by the e ngine via the
V-belt. The viscous clutch regulates the speed of the fan acco rding to the temperatu re of the
coolant.
An auxiliary electric radiato r fan* sw itches on
and off depending on coolant temperature
and ot her vehicle ope rat ing condit io ns.
After you switch the eng ine off, the aux iliary
fan can continue running for up to 10 m inutes
- even w ith the ignition off .
It can even switch
o n aga in later by itself¢.& , if
1111>

Page 241 of 312

- the temperature of the engine coolant rises
due to th e heat bui ld-up from the engine in
the engine compartment, or
- the engine compartment heats up because
the vehicle is parked in intense sunlight.
.&_ WARNING
- To reduce the r isk of personal injury nev­
er touch the radiator fan.
- The auxiliary electr ic fan is temperature
controlled and can switch on sudden ly
even when the engine is not runn ing.
- The auxiliary radiator fan switches on au­ tomat ically when the engine coolant
reaches a certain temperature and will
continue to run until the coolant temper ­
at ure drops.
Brake fluid
Checking brake fluid level
The brake fluid level can be checked with a
quick glance.
N N
-N
i
F ig . 2 05 Eng ine co mpartmen t: cove r on the b rake f lui d
r eservo ir
Before you check anything in th e engine com­
partment,
alwa ys read and he ed all WARN­
INGS c::> .&. in Working in the engine compart­
ment on page 2 28.
~ Read the brake fluid level from the brake
fl uid reservo ir ~
fig . 205, c::> page 230. The
brake f luid leve l must be betwee n the "M IN"
and "M AX" marki ngs.
The location of the brake fl uid reservo ir can be
see n in t he engi ne comp artment illus trati on
c::> page 230.
Checkin g and fillin g 239
The fluid level may d rop slightly afte r some
time due to the automatic adjustment of the
brake pads . T his is not cause for alarm .
If the brake flu id leve l falls considerably be­
low the "MIN" mark, the brake warning/indi­
cator light . (U.S. models) . (Canadian
models) w ill come on
~ page 14 . Do not con­
tin ue to operate the vehicle . The complete
brake sys tem should be thoroughly checked
by an authorized Audi dea ler or other quali ­
fied facility and the cause corrected.
If the
brake f lu id leve l is too low, the brake warning/
indica tor ligh t will illumi nate. Conta ct an au­
thorized Aud i de aler
immediately .
Changing brake fluid
Have the brake fluid changed by an experi­
en ced technician.
B rake fluid absorbs moisture from the air . If
the water content in the brake fluid is too
high, co rrosion in the brake system may resu lt
after a pe riod of time. The boiling point of the
brake f lu id will also dec rease conside rably and
decrease brak ing performance.
T herefo re , the bra ke fluid must be changed
every tw o year s. Always use new br ake f lu id
which con forms to Federal Mo tor Veh icle
Standard " FMVSS 116 DOT 4".
T he bra ke fluid reservo ir can be d iff icu lt to
reach, the refore, we recommend that you
have the bra ke fluid changed by your author­
ized
Audi dealer. Your dealer has the cor rect
tools, the right brake fluid and the know -how
to do this for you.
A WARNING
---- Brake flu id is poisonous. It must be stor­
ed only in the closed or iginal container
out of the reach of children!
- Brake failure can resu lt from old or inap­
prop riate brake f lu id. Observe these pre­
cautions:
- U se only brake fluid tha t meets SAE
specificat ion
J 1703 and conforms to
Federa l Motor Vehicle Standard 116.

Page 242 of 312

24 0 Ch eck ing and filling
Always check wi th your a uthorized Audi
dealer to make s ure you are using the
correct brake flu id. The correct type of
brake fluid is also indicated on the
brake fluid reservoir.
- The brake fluid must be new. Heavy use
of the brakes can cause a vapor lock if
the brake fluid is left in the system too
long. This can ser ious ly affect the effi­
ciency of the b ra kes as well as yo ur
safety. This could result in an acc ident.
(D Note
Brake flu id will damage the paint of your
veh icle.
@ For the sake of the environment
Because of the problem of proper d isposa l
of brake flu id as wel l as the special tools
requ ired and the necessary expert ise, we
recommend that you have the b rake fluid
changed by your author ized Audi dealer.
Battery
General information
Under
normal operating conditions, the bat­
tery in your Audi does not need any mainte­
n ance . With
high outside temperatures or
l ong daily dr ives we recommend that you have
the elec trolyte level checked by a service fa­
cili ty. The e lec trolyte level sho uld a lso be
checked each time the battery is charged
¢ page 242.
Have the b attery checked when you ta ke yo ur
ve hicl e in for service. Yo u are well adv ise d to
replace a battery that is older than S years .
W ith certa in types of airbag deployment, the
battery is d isconnected from the vehicle ele c­
tr ica l system for sa fety reasons¢
& in Re­
pair, care and disposal of the airbags on
page 165.
Disconnecting the battery terminals
Some veh icle func tions (power w indow regu­
l ato rs, for example) a re los t if the b attery ter- mina
ls are disconnected. These functions have
to be relearned after the battery termina ls are
connected aga in. To prevent th is, the battery
sho uld only be disconnected from the ve hicle
electrical system when abso lutely necessary
for repairs.
Vehicle s not driven for long peri ods
If you do not d rive your vehicle over a period
of several days or weeks, e lectr ica l compo ­
nents are gradually cut back or sw itched off.
This reduces energy consumption and ma in­
ta ins start ing capability over a longer period
¢
page 202. Some of the convenience func­
t ions may not ope rate, such as the inter ior
li gh ts or the power seat adjus tment. The con­
venience func tions will be ava ilable ag ain
when you switch on the ignition and start the
engine .
Winter operation D uring the winte r months, battery capac ity
tends to de crease as temperatures drop. This
is beca use more power is also consumed wh ile
sta rting, and the headlights, rear window de ­
fogger, etc ., are used more often .
Avoid unnecessary power consumpt ion, p ar­
t icu lar ly in city traffic or whe n traveling only
short distances. Let yo ur au thorized Aud i
dealer check the capacity of the vehicle bat ­
tery before winter sets in ¢
page 242. A well
charged battery will not on ly prevent starting
problems when the weather is cold, but will
also last longer.
(!) Tips
If your vehicle is left standing for several
weeks at extremely low temperatures, the
vehicle battery sho uld be removed and
stored where it w ill not freeze. This will
prevent it from be ing damaged and having
to be repla ced.

Page:   < prev 1-10 11-20 21-30 next >