ABS AUDI TT 1998 8N / 1.G AEB ATW Engines Pistons And Connecting Rods Workshop Manual

13-54


5 -
Bearing shell
Verify correct installation positionDo not interchange used connecting rod
bearing shells (mark accordingly) Check for proper securing in retaining tabs
Axial play:New: 0.10-0.35 mm (0.004-0.014 in.)Wear limit: 0.40 mm (0.016 in.)

Measure radial play using Plastigage :New: 0.01-0.05 mm (0.0004-0.0020 in.)Wear limit: 0.12 mm (0.0047 in.)Do not turn crankshaft when measuring
radial play with Plastigage in place
- To measure radial play, tighten nut -1- to
30 Nm (22 ft lb) but not any further
6 -
Cylinder block
Check bore Fig. 4Piston and cylinder bore dimensions
Page 13
-60

Pa
ge 2 of 9 Pistons and connectin
g rods, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.4