open AUDI TT 2006 8N / 1.G RNS_E Navigation System Manual

Drives 38For compressing MP3 files we recommend a bit rate of at least 160
kbit/s.
In the case of MP3 files with a variable bit rate, there may be a
discrepancy between play time displayed and the real time.
If various types of information (artist, album, track name, and so on)
a re to b e d i s p l a y e d , a n I D 3 t a g m us t b e a t t a che d to t h e M P 3 fi l e . Th e
MP3 player supports Versions 1 and 2 of ID3 tags. The display of
artist and track name is limited to a total of 64 characters maximum.
The Navigation System recognizes playlists and can play MP3 files
in the sequence established there. The structure of the playlists
must conform to m3u format. The file names must have the exten-
sion “.m3u”.
Tips
Because of the diversity of CD-R/CD-RW blanks and their different
storage capacities, function may be limited with individual storage
media.
Loading CD
M P3 C Ds a n d a u d i o C D s c a n a ls o b e p la y e d i n t h e DV D
navigation drive.
Fig. 36 Display open:
DVD navigation driveFig. 37 Display open:
Inserting CD into the
drive

Drives 38For compressing MP3 files we recommend a bit rate of at least 160
kbit/s.
In the case of MP3 files with a variable bit rate, there may be a
discrepancy between play time displayed and the real time.
If various types of information (artist, album, track name, and so on)
a re to b e d i s p l a y e d , a n I D 3 t a g m us t b e a t t a che d to t h e M P 3 fi l e . Th e
MP3 player supports Versions 1 and 2 of ID3 tags. The display of
artist and track name is limited to a total of 64 characters maximum.
The Navigation System recognizes playlists and can play MP3 files
in the sequence established there. The structure of the playlists
must conform to m3u format. The file names must have the exten-
sion “.m3u”.
Tips
Because of the diversity of CD-R/CD-RW blanks and their different
storage capacities, function may be limited with individual storage
media.
Loading CD
M P3 C Ds a n d a u d i o C D s c a n a ls o b e p la y e d i n t h e DV D
navigation drive.
Fig. 36 Display open:
DVD navigation driveFig. 37 Display open:
Inserting CD into the
drive

Drives39
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the button to open the display
page 38,
fig.36.
– Hold the MP3 CD or audio CD by the hole in the center
and the outer edge
page 38, fig.37.
– Guide the MP3 CD or audio CD straight (label side up)
into the drive . The CD is pulled in automatically.Before inserting the CD, check to make sure there is no CD already
in the drive. If there is a CD in the drive, push the Eject button and
remove the CD
page 37.
A CD s ho uld never be forced in to the drive. The CD is pulled in auto-
matically. If the CD is inserted wrong side up, you will be alerted by
a message in the open display.
If an MP3 CD has been inserted and not played, the data from the
ID3 tag are read in in the background. If you start playback of an
MP3 CD immediately, the ID3 tag data are displayed for the track
being played.
An audio CD (CD-A) inserted in the DVD navigation drive is played
using the CD function
page 78. An MP3 CD inserted in the DVD
navigation drive is played using the MP3 function
page 83.
Note


Always keep the navigation DVD that you removed in a suitable
j e w e l c as e (e .g . C D c as e ) to p ro t e c t t he DV D f ro m d i r t , d us t p a r t i c le s ,
scratches and other damage
page 48.


Do not attach labels to the CDs. Heat can cause the label to
b e c o m e d e t a ch e d i n t h e d ri v e , j a m t h e CD a n d c a us e a m a lf un c t io n .
Use a permanent marker to label CDs you have burned yourself.


Never expose the navigation DVD to direct sunlight.
Tips


Standard 12-cm diameter CDs can be used. Mini CDs with a
diameter of 8 cm (3 inches) or non-circular CDs, known as shape
CDs, must not be used.


The use of cleaning CDs can lead to mechanical damage to the
drive.


Because of the diversity of CD-R/CD-RW blanks and their
different storage capacities, function may be limited with individual
storage media.


If you have not inserted a navigation DVD into the drive, you
cannot use the Navigation and Directory functions.
Ejecting a CD– Press the button to open the display.


A2
A1
Fig. 38 Display open:
Ejecting a CD


A2

Drives41
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Loading a memory card
The Navigation System contains two MP3 card
readers.
– Press the button to open the display
page 39,
fig.38.
– Insert the memory card with the label side up (contact
surface down) into the card reader slot
fig.39. The
missing corner of the memory card must point to the
front right as seen in the direction of travel
fig.40.
– Then push the memory card into the slot until you feel it
click into place. The memory card is flush with the area
around it.I f t h e m e m o r y c a r d h a s b e e n l o a d e d c o r r e c t l y, t h e f o r m a t t e d s t o r a g e
capacity of the card is displayed in the open display. In addition, the
file format “MP3”, or possibly the date carrier name, is displayed if
MP3 audio files have been stored on the card and they can be read
by the MP3 player.
As long as the message “Reading card...Please do not remove”
appears in the display, the memory card must not be removed from
the drive. If the memory card is removed from the drive, there is a
possibility that the data will be destroyed. In this case, the memory
card can no longer be read and must be formatted.
If a memory card has been inserted and not played, the data from
the ID3 tag s are re ad in the b ackground. If you star t playback of the
memory card immediately, the ID3 tag data are displayed for the
track being played.
Note
Use only single-piece SD/MMC memory cards. If you use SD/MMC
adapter cards (multi-piece memory cards), the memory card can
become detached from the adapter as the result of vibration while
driving. There is a possibility that individual pieces may become
stuck in the drive.
Fig. 39 Display open:
Inserting a memory
card.Fig. 40 Display open:
Position of the
SD/MMC card during
loading


A2

Drives 42
Tips

The MP3 player is operated through the main CD/SD function
page 83.

The storage capacity displayed equals the formatted storage
capacity of the SD or MMC card being used and may vary from the
capacity printed on the label.
Removing a memory card– Press the button to open the display
page 39,
fig.38.
– Give a short push on the memory card
f i g .4 1 . T h e c a r d
is released from the slot.
– Remove the memory card.
Once the memory card has been removed, the open display shows
Empty.
As long as the message “Reading card...Please do not remove”
appears in the display, the memory card must not be removed from
the drive. If the memory card is removed from the drive, there is a
possibility that the data will be destroyed. In this case, the memory
card can no longer be read and must be formatted.
Tips


A l w a y s k e e p t h e m e m o r y c a r d i n a s u i t a b l e c a s e t o p r o t e c t i t f r o m
dirt, dust particles, scratches and other damage
page 48.


Never expose the memory cards to direct sunlight.
Fig. 41 Display open:
Removing a memory
card.


A2

Drives 46Removing and inserting the magazineYou can load and remove the CD magazine with the Naviga-
tion System switched on or off.
Removing the magazine from the CD changer
– Slide the changer door open
fig.46.
– Press the cartridge eject button
fig.46. The maga-
zine automatically comes out.
– Remove the magazine .
Inserting the magazine in the CD changer
– Open the sliding door of the CD slot
fig.46.
– Slide the magazine all the way in with the inscription
“disc” on top. While doing this, the arrow on the maga-
zine must point towards the magazine slot
fig.46.– Close the changer door .
After inserting the magazine, you will hear a “working noise” from
t h e CD c ha n g e r. Th e d e v i c e i s s im p l y c o u n t i n g h o w ma ny C Ds a r e i n
the changer.
If there is no magazine in the CD changer, a read error is shown in
the display.
Fig. 46 CD changer
with magazine
A1
A2
A3
A;
A1

Drives 48Removing CDs from the magazine– Turn the magazine over and hold it with the CD release
lever up
fig.49.
– Hold the release lever against the spring force.
– Press the C Ds o ut through the open ing in the back of the
magazine
fig.49.
– Take the CDs out of the magazine.
Note

Always keep your CDs in their original cases to protect them
from dirt, dust, scratches or other damage.


Never expose CDs to direct sunlight.
Tips
Do not let the CDs drop!TipsPrecautions with laser devicesLaser devices are categorized according to DIN IEC 76 (CO) 6/ VDE
0837 into safety classes 1 - 4.
The laser devices in your Audi conform to safety class 1.
The laser used in Class 1 is so low and so well shielded, no danger
exists with proper usage.
Tips
D o n o t o p e n t h e c a b i n e t . Th e u n i t d o e s n o t c o n t a i n a n y c o m p o n e n t s
that can be maintained by the user.
Fig. 49 Removing CDs
from the magazine

RADIO65
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Setup Radio (FM/AM range)Opening and closing SetupFig. 64 Setup Radio: Main menu– In a Radio menu, press the button to open the
main Setup menu for the radio function
fig.64.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup Radio:

Station reception
page 65


Station display
page 66


Delete stored stations
page 67The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Station reception (FM/AM range)
The selectivity for the automatic seek function can also
be adjusted.Fig. 65 Setup Radio: Station reception
SETUP
SETUP

RADIO 70Setup Satellite radioOpening and closing SetupFig. 70 Setup Radio XM: Main menu– In a radio menu, press the button to open the
main Setup menu for satellite radio
page 65, fig.64.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup Radio:

Sorting stations
page 70


Station info
page 71


Category filter
page 72


Receiver serial number
page 68


Delete stored entries
page 73
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Applies to vehicles: with Satellite Digital Audio Radio ServiceSorting stations
S t a t i o ns c a n b e s o r t e d b y c a t e g or y o r ch a n ne l n u mb e r.Fig. 71 Setup Radio XM: Sort station by
SETUP
SETUP

CD/SD 82When the button is pressed again, the scanning stops and the title
currently being played will continue to play.
Tips
If you have set Repeat fo r a s i n g l e Tra c k in Setup CD, you cannot use
the Scan function
page 82.
Setup CDOpening and closing SetupFig. 83 Setup CD Repeat CD (main Setup menu)– I n a C D m e n u , p r e s s t h e b u t t o n t o o p e n t h e m a i n
Setup menu for the CD function
fig.83.– Press the button again to close the main Setup
menu again.
The Repeat options
page 82 can be set in Setup CD.
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Repeating CD–Press the function button
page 16 in the CD
menu.
– Select Repeat
fig.83.
– Select CD, off or Tr a c k.

Function CD: The current CD tracks are repeated.


Function off: The Repeat function is switched off.


Function Tr a c k: The CD track currently entered is repeated.Tips
The Repeat options can be combined with the Random function.
You can find more information in the description of the Random
function
page 81.
SETUP
SETUPSETUP