AUDI TT 2009 8J / 2.G RNS_E Navigation System Manual

RADIO67
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Delete stored stations (FM/AM range)Fig. 67 Setup Radio: Delete stored stationsDelete individual stations
– Press the function button in the FM/AM radio
menu.
–Select Delete stored stations
page 66, fig.66.
–Select Delete individually
fig.67.
– Rotate and press the control knob to delete individual
stations from the memory list.
Delete all stations
– Press the function button in the FM/AM radio
menu.– Select Delete stored stations
page 66, fig.66.
– Select Delete all
fig.67. All entries on the memory list
are deleted.
Satellite Digital Audio Radio
ServiceApplies to vehicles: with Satellite Digital Audio Radio ServiceTechnical requirementsIn addition to the radio in your vehicle, a tuner module has to be
installed in order to be able to receive satellite programs. At the
p r e s e n t t i m e , t u n e r s a r e a v a i l a b l e f r o m t h e s e p r o v i d e r s : XM Satellite
radio and Sirius Satellite radio. If you would like to retrofit a tuner,
please consult your Audi dealer.
You can select Radio Satellite mode (XM or Sirius Radio) by oper-
ating the Band control button
page 57 or by repeatedly pressing
the function button
page 16. If you have not yet
installed a tuner in your vehicle, the Band function will display the
Satellite radio option.
Th e Memory control button functions the same for all bands (FM,
AM, XM or Sirius)
page 61.
Tips


Only one tuner module can be installed in a vehicle at a time.


XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
SETUPSETUP
FM

AM

RADIO 68

Sirius and related marks are trademarks of Sirius Satellite Radio
Inc.
Applies to vehicles: with Satellite Digital Audio Radio ServiceActivate your Satellite Radio Service
In order to be able to receive satellite programs, this
service must be enabled.Fig. 68 Setup Radio: Example for Receiver serial numberIn order to have the service enabled at your provider, you
need the ID number of the tuner. To show the ID number in
the display:
– Press the function button in the satellite radio
menu.– Select Receiver serial number
page 70, fig.71 by
rotating the control knob.
– Pre s s t h e co n t ro l kn o b . Th e ID n u m be r w i l l a pp e a r o n t h e
Display
fig.68.
XM ID number
This number is an 8 character alphanumeric number.
The XM ID number can be called up in the XM main menu using the
000 Radio ID
page 60, fig.57 option.
Sirius ID number
This number is a 12 character alphanumeric number.
SETUP

RADIO69
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Applies to vehicles: with Satellite Digital Audio Radio ServiceSatellite station list
The available stations are listed in the satellite main
menu.Fig. 69 Radio: Sirius Satellite Radio station list– Press the function button if another menu is
currently being displayed.
– Select the desired radio station in the main XM or Sirius
radio menu with the control knob.If you are not in the main satellite radio menu (XM or Sirius Radio)
after pressing the function button, you can change the frequency
band by pressing the Band control button
page 57 or by repeat-
edly pressing the function button page 16.Operating the Memory c o n t ro l b ut t o n d i s p l a y s t h e m e m o r y l i s t . Yo u
m a y s t o r e s t a t i o n s f r o m t h e F M , A M a n d S a t e l l i t e r a d i o ( X M o r S i r i u s )
bands
page 61.
The explanations for the sound settings start with section
page 92.Tips


The stations that are displayed in the station list can be filtered
a c c o r d in g to yo u r p e r s o n a l d e s i re s as to ty p e o f p ro g ra m
page 72.


If you operate the button in a submenu, the Satellite
radio main menu will be displayed.


The control button with the Tu n i n g function cannot be
selected.
FM
AM
FM

AM
RETURN

RADIO 70Setup Satellite radioOpening and closing SetupFig. 70 Setup Radio XM: Main menu– In a radio menu, press the button to open the
main Setup menu for satellite radio
page 65, fig.64.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup Radio:

Sorting stations
page 70


Station info
page 71


Category filter
page 72


Receiver serial number
page 68


Delete stored entries
page 73
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Applies to vehicles: with Satellite Digital Audio Radio ServiceSorting stations
S t a t i o ns c a n b e s o r t e d b y c a t e g or y o r ch a n ne l n u mb e r.Fig. 71 Setup Radio XM: Sort station by
SETUP
SETUP

RADIO71
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the function button in the satellite radio
menu.
–Select Sort station by
page 70, fig.71.
–Select Category or Channel no.
page 70, fig.71.If you select “Sort station by” Category, the station categories are
listed in the main menu in alphabetical order. Within the individual
categories the stations are listed by channel number in ascending
order.
If you select “Sor t station b y” Channel no., the stations are listed by
channel number in ascending order.
Tips
The stations that are displayed in the station list can be filtered
according to your personal desires as to type of program page 72.
Applies to vehicles: with Satellite Digital Audio Radio ServiceStation info
The two-part informational text in the Display can be
switched on and off.Fig. 72 Setup Radio: Station info– Press the function button in the satellite radio
menu.
– Select Station info.
– Select on or off
fig.72.If you have switched on Station info, two-part information is
displayed in the satellite radio main menu. For e xample, the names
of the artist and song are displayed
page 69, fig.69.
SETUP
SETUP

RADIO 72Applies to vehicles: with Satellite Digital Audio Radio ServiceCategory filter
You can make a preselection in the program catego-
ries.Fig. 73 Setup Radio: Category filterTurning on filter option
– Press the function button in the satellite radio
menu.
– Select Category filter.
–Under Category filter select the desired filter option and
press the control knob. A check

will appear after the
filter option, or– Select the filter option All categories and press the
control knob so that a check

appears after All
categories.
Turning off individual filter options
– Press the function button in the satellite radio
menu.
– Select Category filter.
–Under Category filter select individual filter options that
are not to be active any longer and press the control
knob. The check

after the filter option disappears.
Turning off all filters
– Press the function button in the satellite radio
menu.
–First select the filter option All categories and press the
control knob so that a check

appears after All
categories. A t the sam e tim e, a check

will appear after
each filter option.
– If you press the control knob again afterwards, the
checks

after all of the filter options disappear.
The stations that are displayed in the station list can be filtered
according to your personal des ire s as to type of program. The selec-
tion of program categories depends on what your provider offers.
SETUP
SETUPSETUP

RADIO73
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Applies to vehicles: with Satellite Digital Audio Radio ServiceDelete stored stationsDelete individual stations
– Press the function button in the satellite radio
menu.
–Select Delete stored stations
page 71, fig.72.
–Select Delete individually.
– Rotate and press the control knob to delete individual
stations from the memory list.
Delete all stations
– Press the function button in the satellite radio
menu.
–Select Delete stored stations.
–Select Delete all. All entries on the memory list are
deleted.Applies to vehicles: with Satellite Digital Audio Radio ServiceSystem informationThe following system messages can be displayed:XM Satellite Radio
Sirius Satellite Radio
SETUPSETUP
System mes-
sages
Meaning
ANTENNA
No antenna is connected to the tuner, or
there are loose plug contacts on the
antenna cable.
UPDATING
Your system is being updating.
NO SIGNAL
The tuner is presently not receiving any
satellite signal.
LOADING
Yo u r p ro v i d e r i s s e n d i n g i n fo r ma t i o n w h ich
the system is currently storing.
OFF AIR
The station selected has shut down its pro-
gram (e.g. children's channel at night)
INVALID
The channel is invalid or not used.
System mes-
sages
Meaning
LINKING
The tuner is presently not receiving any
satellite signal.
CALL 888-539-SIRIUS
TO SUBSCRIBE
First possibility: the tuner has not been
enabled yet. Second possibility: the station
selected is not enabled, for example
because the station requires a subscrip-
tion.

CD/SD 74CD/SDIntroductionGeneral
C D a n d M P 3 o p e r a t i o n i s s e l e c t e d b y u s i n g t h e
function button.Depending on the equipment in your vehicle, you can use the
function to play an audio CD in the DVD navigation drive,
use a CD changer*
page 79 or the MP3 player integrated into the
Navigation System page 83.
You switch between the CD and MP3 function by using the control
button with the Source function
page 77.
Selecting CD functionFig. 74 Display: Main CD menu (example of a list of tracks)– Insert an audio CD into a drive
page 34
– Press the function button
page 16. A main
audio menu
fig.74 or the previously active function
menu appears in the display.
– If necessary, press the control button with the Source
function and select CD
page 77.
– Press one of the control buttons
page 17 to move to
the appropriate submenus to
fig.74.
CD/SD
CD/SD
CD/SD
A1
A4

CD/SD75
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP The following submenus are available in the CD
function:The following submenus are available in the CD Setup
function:
Selecting MP3 functionFig. 75 Display: Main MP3 menu (example of a list of tracks)– Insert an MP3 card or an MP3 CD into the appropriate
drive
page 37.
Control button
functions 
page 74,
fig. 74
CD submenus

CD list*
Audio CD
Empty
CD ROM
CD unreadable

Source
CD
MP3

Sound
Balance
Fader
Tr e b l e
Bass
DSP
a)b)

Volume settings (Navigation info)
a)Digital Signal Processingb)Vehicles with a BOSE® sound system in conjunction with an AudioPilot do
n o t h a v e a D S P f u n c t i o n . I n t h i s c a s e y o u r v e h i c l e i s e q u i p p e d w i t h D y n a m i c
Noise Compensation
page 94.

CD control
Forward
Reverse
Next
Previous
Random
Scan
A1A2A3A4
CD Setup submenu
Press the
function button in
the CD function
page 82
Repeat CD
SETUP

CD/SD 76
– Press the function button
page 16. A main
audio menu
page 74, fig.74 or the previously active
function menu appears in the display.
– If necessary, press the control button with the Source
function and select MP3
page 77.
– Press one of the control buttons
page 17 to move to
the appropriate submenus to
page 75, fig.75.
The following submenus are available in the MP3
function:
CD/SD
A1
A
Control button
functions 
page 74,
fig. 74
MP3 submenus

MP3 list
CD
Card 1
Card 2
Navigation DVD
Empty
Audio
CD ROM
Unreadable

Source
CD
MP3

Sound
Balance
Fader
Tr e b l e
Bass
DSP
a)b)

Volume settings (Navigation info)
a)Digital Signal Processing

MP3 ctrl
Forward
Reverse
Next
Pre viou s
Random
Scan
Name (Details)
A1AA A