BMW 3 SERIES 2018 Owners Manual

3.Control Display is switched on.4."Teleservice Help"
The driving ability of the vehicle can be rejstored for specific functions.
If this is not possible, further measures will be
initiated, for instance Roadside Assistance will
be informed.
Warning
triangle
The warning triangle is located on the inside ofthe tailgate.
To remove, loosen the bracket.
First-aid
kit General
information Some of the articles have a limited service life.
Check the expiration dates of the contents regularly and replace any expired items
promptly.
Storage
The first-aid kit is located in the cargo area in a storage compartment.
Jump-starting
General
information
If the battery is discharged, the engine can be
started using the battery of another vehicle
and two jumper cables. Only use jumper caj
bles with fully insulated clamp handles.
Safety
information DANGER
Contact with live components can lead to
an electric shock. There is a risk of injuries or danger to life. Do not touch any componentsthat are under voltage.'

Preparation1.Check whether the battery of the other vejhicle has a voltage of 12 volts. The voltage
information can be found on the battery.2.Switch off the engine of the assisting vehij cle.3.Switch off any electronic systems/powerconsumers in both vehicles.
Starting
aid
terminals
The starting aid terminal in the engine comj
partment acts as the battery's positive termij
nal.
Open the cover of the starting aid terminal.
The body ground or a special nut acts as the battery negative terminal.
Connecting
the
cables
To prevent personal injury or damage to bothvehicles, adhere strictly to the following procejdure.1.Open the cover of the BMW starting aidterminal.2.Attach one terminal clamp of the positive
jumper cable to the positive terminal of the battery, or to the corresponding starting
aid terminal of the vehicle providing assisj
tance.3.Attach the terminal clamp on the other end of the cable to the positive terminal of the
battery, or to the corresponding starting
aid terminal of the vehicle to be started.4.Attach one terminal clamp of the negative jumper cable to the negative terminal ofthe battery, or to the corresponding engine
or body ground of assisting vehicle.5.Attach the second terminal clamp to the
negative terminal of the battery, or to the corresponding engine or body ground of
the vehicle to be started.
Starting
the
engine
Never use spray fluids to start the engine.
1.Start the engine of the assisting vehicle
and let it run for several minutes at an inj creased idle speed.
If the vehicle to be started has a diesel enj gine: let the engine of the assisting vehiclerun for approx. 10 minutes.2.Start the engine of the vehicle that is to bestarted in the usual way.
If the first starting attempt is not successj
ful, wait a few minutes before making anj
other attempt in order to allow the disj
charged battery to recharge.3.Let both engines run for several minutes.4.Disconnect the jumper cables in the rej verse order.
Check the battery and recharge, if needed.
Seite 272MobilityBreakdown
assistance272
Online Edition for Part no. 01402984107 - X/17

Tow-starting
and
towingSafety
information WARNING
Due to system limits, individual functions
can malfunction during tow-starting/towing with the Intelligent Safety systems activated.
There is a risk of an accident. Switch all Intellij gent Safety systems off prior to tow-starting/
towing.'

NOTE
The vehicle can become damaged when
lifting and securing it.
There is a risk of damage to property.'yLift the vehicle using suitable means.'yDo not lift or secure the vehicle by its tow fitting, body parts, or suspension parts.'

'yThe tow bar will generate lateral forces if itis secured with an offset.
Tow
rope
When starting to tow the vehicle, make surethat the tow rope is taut.
Use nylon ropes or straps, which will enable
the vehicle to be towed without jerking.
Tow
fitting
General
information
The screw-in tow fitting should always be carj
ried in the vehicle.
The tow fitting can be screwed in at the front
or rear of the vehicle.
The tow fitting and the onboard vehicle tool kit, refer to page 263, are together in the cargo
area.
Use of the tow fitting:
'yUse only the tow fitting provided with the
vehicle and screw it all the way in.'yUse the tow fitting for towing on paved
roads only.'yAvoid lateral loading of the tow fitting, for instance do not lift the vehicle by the towfitting.
Safety
information
NOTE
If the tow fitting is not used as intended,
there may be damage to the vehicle or to the
tow fitting. There is a risk of damage to propj
erty. Follow the notes on using the tow fitj
ting.'

5.Stop at a suitable location, remove the towbar or rope, and switch off the hazard
warning system.6.Have the vehicle checked by a dealerss
service center or another qualified service
center or repair shop.Seite 276MobilityBreakdown
assistance276
Online Edition for Part no. 01402984107 - X/17

CareVehicle
features
and
optionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Washing
the
vehicle
General
information Regularly remove foreign objects such asleaves in the area below the windshield when
the hood is raised.
Wash your vehicle frequently, particularly in
winter. Intense soiling and road salt can damj age the vehicle.
Steam
blaster
and
high-pressure
washer
Safety
information NOTE
When cleaning with high-pressure washj
ers, components can be damaged due to the pressure or temperatures being too high.There is a risk of damage to property. Maintain
sufficient distance and do not spray too long continuously. Follow the operating instructionsfor the high-pressure washer.'

the outside when in selector lever position N. Asignal sounds when an attempt is made to lock
the vehicle.
Driving
out
of
a
vehicle
wash
Make sure that the remote control is in the vej hicle.
Start the engine. Starting the engine, refer to page 88.
Headlights
Do not rub wet headlights dry and do not use abrasive or acidic cleaning agents.
Soak areas that have been dirtied, for instance
from insects, with shampoo and wash off with water.
Thaw ice with de-icing spray; do not use an ice
scraper.
After
washing
the
vehicle After washing the vehicle, apply the brakes
briefly to dry them; otherwise, braking action can be reduced. The heat generated duringbraking dries brake discs and brake pads andprotects them against corrosion.
Completely remove all residues on the winj
dows, to minimize loss of visibility due to
smearing and to reduce wiper noises and wiper blade wear.
Vehicle
care Vehicle
care
products
General
information
BMW recommends using vehicle care and
cleaning products from BMW. Suitable care products are available from a dealerss service
center or another qualified service center or rej pair shop.Safety
information
WARNING
Cleansers can contain substances that
are dangerous and harmful to your health. There is a risk of injury. When cleaning the inj
terior, open the doors or windows. Only use
products intended for cleaning vehicles. Folj
low the instructions on the container.'

Use leather care products; otherwise, dirt and
grease will gradually break down the protective layer of the leather surface.
Upholstery
material
care
General
information Vacuum the upholstery regularly with a vacj
uum cleaner.
If upholstery is very dirty, for instance with bevj erage stains, use a soft sponge or microfiber cloth with a suitable interior cleaner.
Clean the upholstery down to the seams usinglarge sweeping motions. Avoid rubbing thematerial vigorously.
Safety
information NOTE
Open Velcron fasteners on articles of
clothing can damage the seat covers. There is a risk of damage to property. Ensure that anyVelcron fasteners are closed.'

Safety
beltsWARNING
Chemical cleansers can destroy the
safety belt webbing. Missing protective effect
of the safety belts. There is a risk of injuries or
danger to life. Use only a mild soapy solution
for cleaning the safety belts.'