BMW 3 SERIES GRAN TURISMO 2018 Owners Manual

4.Likewise, press and hold the button of the
desired function on the hand-held transj mitter.5.Release both buttons as soon as the intej
rior mirror LED flashes more rapidly. The LED flashing faster indicates that the butj
ton on the interior mirror has been proj
grammed. The system can then be conj
trolled by the button on the interior mirror.
If the LED does not flash faster after at
most 60 seconds, change the distance and
repeat the programming starting with
step 4. Several more attempts at different
distances may be necessary. Wait at least 15 seconds between attempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior mirror button and repeatj
edly press and release the hand-held
transmitter button for 2 seconds.
Operation
WARNING
Body parts can be jammed when operatj
ing remote-controlled systems, for instance
the garage door, using the integrated Universal Remote Control. There is a risk of injury or risk
of damage to property. Make sure that the area of movement of the respective system is clear
during programming and operation. Also follow
the safety instructions of the hand-held transj
mitter.'

World
map
with
magnetic
zonesProcedure1.Press and hold the control button for apjprox. 3 to 4 seconds. The number of theset compass zone appears in the mirror.2.To change the zone setting, press the conj
trol button quickly and repeatedly until the
number of the compass zone that correj sponds with your location appears in the
mirror.
The set zone is stored automatically. The comj
pass is ready for use again after approximately
10 seconds.
Calibrating
the
digital
compass
The digital compass must be calibrated in the
event of the following:
'yThe wrong compass point is displayed.'yThe point of the compass displayed does not change despite changing the directionof travel.'yNot all points of the compass are disj
played.Procedure1.Make sure that there are no large metallic
objects or overhead power lines near the
vehicle and that there is sufficient room to
drive around in a circle.2.Set the currently applicable compass zone.3.Press and hold the control button for apj prox. 6 to 7 seconds so that "C" appears
on the display. Next, drive in a complete circle at least once at a speed of no more
than 4 mph/7 km/h. If calibration is sucj
cessful, the "C" is replaced by the points of
the compass.
Left/right-hand
steering
The digital compass is already set for right or
left-hand steering at the factory.
Setting
the
language
Press and hold the control button for approx.
12 to 13 seconds. Briefly press the control
button again to switch between English "E" and German "O".
Seite 192ControlsInterior
equipment192
Online Edition for Part no. 01402981529 - VI/17

Settings are stored automatically after approxijmately 10 seconds.
Sun
visor
Glare
shield Fold the sun visor down or up.
Vanity
mirror A vanity mirror is located in the sun visor bejhind a cover. When the cover is opened, themirror lighting switches on.
Ashtray/cigarette
lighterAshtray
Opening
Slide the cover forward.
Installing
The ashtray can be inserted in both cup holdj ers.
Emptying
Take out the insert.
Cigarette
lighter WARNING
Contact with hot heating elements or the
hot socket of the cigarette lighter can cause
burns. Flammable materials can ignite if the
cigarette lighter falls down or is held against
the respective objects. There is a risk of fire
and injuries. Hold the cigarette lighter by its
handle. Make sure that children do not use the
cigarette lighter and burn themselves.'

Push in the cigarette lighter.
The cigarette lighter can be rej
moved as soon as it pops back
out.
Sockets General
information
The lighter socket can be used as a socket for electrical equipment while the engine is runjning or when the ignition is switched on.
The total load of all sockets must not exceed 140 watts at 12 volts.
Do not damage the socket by using non-comj patible connectors.
Safety
information WARNING
Devices and cables in the unfolding area
of the airbags, for instance portable navigation
devices, can hinder the unfolding of the airbag
or be thrown around in the car's interior when
unfolding. There is a risk of injury. Make sure
that devices and cables are not in the airbag's
area of unfolding.'

In
the
cargo
area
The socket is located on the left side in the
cargo area.
USB
interface
Concept
Mobile devices with USB port can be conj
nected to the USB interface.
General
information
Follow the information regarding the connecj
tion of mobile devices to the USB interface in the section on USB connections, refer topage 39.
In
the
center
armrest
A USB interface is located in the center armj rest.
In
the
center
console
A USB interface is located in the center conjsole.
Cargo
area Cargo
cover
Safety
information WARNING
Loose objects or devices with a cable
connection to the vehicle, e.g., mobile phones, can be thrown into the vehicle's interior while
driving, e.g., in the event of an accident or durj ing braking and evasive maneuvers. There is arisk of injury. Secure loose objects or devices
with a cable connection to the vehicle in the vehicle's interior.'

RemovingCargo
cover
in
rear
window1.Pull the cargo cover with both hands by the
outer edges towards the rear, arrows 1, to
disengage it from the catches.2.Push the cargo cover upwards, arrow 2,
and remove it.
Cargo
cover
in
the
cargo
area
Push the cargo cover upwards, arrow 1, until it
disengages from the catches and then pull it towards the front, arrow 2.
Stowing NOTE
A removed cargo floor panel can only be
installed with special knowledge. There is a
risk of property damage. Have a removed
cargo floor panel installed by a dealerss service
center or another qualified service center or rej pair shop.'

WARNING
If a rear seat backrest is not locked, unj
secured cargo can be thrown into the car's inj terior, for instance in case of an accident, brakjing or evasive maneuver. There is a risk ofinjury. Make sure that the rear seat backrest is
locked after folding it back.'

Settings
Pull the lever and hold it there. Adjust the tilt ofthe rear seat backrest.
Fold
back
the
backrest
Pull the lever and hold it there. Fold the rear
seat backrest all the way back and let it enj
gage.
Fold
down
the
middle
section
1.Push the center head restraint down if necj
essary.2.Reach into the recess and pull the center section forward.Seite 198ControlsInterior
equipment198
Online Edition for Part no. 01402981529 - VI/17

Storage
compartmentsVehicle
features
and
optionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Safety
information WARNING
Loose objects or devices with a cable
connection to the vehicle, e.g., mobile phones, can be thrown into the vehicle's interior while
driving, e.g., in the event of an accident or durj
ing braking and evasive maneuvers. There is a risk of injury. Secure loose objects or devices
with a cable connection to the vehicle in the
vehicle's interior.'

ClosingFold cover closed.
Locking The glove compartment can be locked with an
integrated key. This prevents access to the glove compartment.
After the glove compartment is locked, the rej
mote control can be handed over, such as at a
hotel, without the integrated key.
Driver's
side
Safety
information WARNING
Folded open, the glove compartment
protrudes in the vehicle's interior. Objects in the glove compartment can be thrown into thevehicle's interior while driving, e.g., in the eventof an accident or during braking and evasive
maneuvers. There is a risk of injury. Always close the glove compartment immediately after
using it.'