BMW 4 SERIES COUPE 2017 Owners Manual

Intelligent
SafetyThe
concept
Intelligent Safety enables central operation of
the driver assistance system.
Depending on how the vehicle is equipped, Inj
telligent Safety consists of one or more sysj tems that can help prevent a imminent collijsion. These systems are active automaticallyevery time the engine is started using the
Start/Stop button:'yFront-end collision warning, refer to
page 112.'yPedestrian warning, refer to page 117.
Safety
information
WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sysj
tem may not be output or they may be output
too late or incorrectly. There is a risk of an acj
cident. Adjust the driving style to the traffic conditions. Watch traffic closely and activelyintervene in the respective situations.'

Front-end
collision
warning
Depending on the equipment, the collision
warning system consists of one of the two sysj
tems:'yFront-end collision warning with City Brakj
ing function, refer to page 112.'yFront-end collision warning with braking
function, refer to page 114
Approach
control
warning
with
City
light
braking
function
Concept
The system can help prevent accidents. If an
accident cannot be prevented, the system will help reduce the collision speed.
The system sounds a warning before an immij
nent collision and actuates brakes independj
ently, if needed.
The automatic braking intervention is done with limited force and duration.
A camera in the area of the rearview mirror
controls the system.
The approach control warning is available even if cruise control has been deactivated.
With the vehicle approaching another vehicle
intentionally, the approach control warning and braking are delayed in order to avoid false sysj
tem reactions.
General
information The system warns at two levels of an imminentdanger of collision at speeds from approx.3 mph/5 km/h. Time of warnings may vary withthe current driving situation.
Appropriate braking kicks in at speeds of up to
35 mph/60 km/h.
Detection
range
Objects are responded to if they are detected
by the system.
Safety
information WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sysj tem may not be output or they may be output
too late or incorrectly. There is a risk of an acj cident. Adjust the driving style to the traffic
conditions. Watch traffic closely and activelyintervene in the respective situations.'

Overview
Button
in
the
vehicle
Intelligent Safety button
Camera
The camera is installed near the interior mirror. Keep the windshield in front of the interior mirj
ror clean and clear.
Switching
on/off
Switching
on
automatically The system is automatically active after every
driving off.
Switching
off Press button: the system is switchedoff. The LED goes out.
Re-press button: the system is switched on.
The LED lights up.
Setting
the
warning
time
The warning time can be set via iDrive.1."Settings"2."Frontal Coll. Warning"3.Activate the desired time on the Control
Display.
The selected time is stored for the profile curj
rently used.
Warning
with
braking
function
Display If a collision with a recognized vehicle is immijnent a warning symbol appears in the instruj ment cluster and in the Head-Up Display.
SymbolMeasureSymbol lights up red: prewarning.
Brake and increase distance.Symbol flashes red and an acoustic signal sounds: acute warning.
You are requested to intervene by
braking or make an evasive maneuj
ver.
Prewarning
This warning is issued, e.g., when there is the impending danger of a collision or the distanceto the vehicle ahead is too small.
The driver must intervene actively when there
is a prewarning.
Acute
warning
with
braking
function
Acute warning is displayed in case of the immij nent danger of a collision when the vehicle apj
proaches another object at a high differential
speed.
The driver must intervene actively when there
is an acute warning. If necessary, the driver is
assisted by a minor automatic braking interj
vention in a possible risk of collision.
Seite 113SafetyControls113
Online Edition for Part no. 01 40 2 973 409 - VI/16

Acute warnings can also be triggered without
previous forewarning.
Braking
intervention
The warning prompts the driver himself/herself to react. During a warning, the maximum brakj
ing force is used. Prerequisite for the brake booster is sufficiently quick and hard steppingon the brake pedal. The system can assist withsome braking intervention if there is a risk of acollision. At low speeds vehicles may thus
come to a complete stop.
Manual transmission: During a braking interj
vention up to a complete stop, the engine may
be shut down.
The braking intervention is executed only if vej
hicle stability has not been restricted, e.g., by
deactivating the DSC Dynamic Stability Conj
trol.
The braking intervention can be interrupted by
stepping on the accelerator pedal or by acj
tively moving the steering wheel.
Object detection can be restricted. Observe
the limitations of the detection range and funcj tional restrictions.
System
limits
Safety
information WARNING
The system can react incorrectly or not
at all due to the system limits. There is a risk of
accidents or risk of property damage. Observe the information regarding the system limits
and actively intervene, if needed.'

The system sounds a warning before an immij
nent collision and actuates brakes independj
ently if needed.
The automatic braking intervention is executed with limited braking force and for a brief period
only.
If the vehicle is equipped with Active Cruise
Control with Stop&Go, the front-end collision
warning is controlled via the cruise control raj
dar sensor.
The front-end collision warning is available even if cruise control has been deactivated.
With the vehicle approaching another vehicle
intentionally, the collision warning and braking
are delayed in order to avoid false system rej actions.
General
information
The system issues a two-phase warning of a possible danger of collision with vehicles at
speeds above approx. 3 mph/5 km/h. Time of warnings may vary with the current driving sitjuation.
Detection
range
Objects are responded to if they are detected
by the system.
Safety
information WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sysj tem may not be output or they may be output
too late or incorrectly. There is a risk of an acj
cident. Adjust the driving style to the traffic conditions. Watch traffic closely and activelyintervene in the respective situations.'

Switching
on/off
Switching
on
automatically The system is automatically active after every
driving-off.
Switching
off Press button: the system is switchedoff. The LED goes out.
Re-press button: the system is switched on.
The LED lights up.
Setting
the
warning
time The warning time can be set via iDrive.1."Settings"2."Frontal Coll. Warning"3.Activate the desired time on the Control
Display.
The selected time is stored for the profile curj
rently used.
Warning
with
braking
function
Display If a collision with a recognized vehicle is immijnent a warning symbol appears in the instruj ment cluster and in the Head-Up Display.
SymbolMeasureSymbol lights up red: prewarning.
Brake and increase distance.Symbol flashes red and an acoustic signal sounds: acute warning.
You are requested to intervene by
braking or make an evasive maneuj
ver.
Prewarning
This warning is issued, e.g., when there is the impending danger of a collision or the distanceto the vehicle ahead is too small.
The driver must intervene actively when there
is a prewarning.
Acute
warning
with
braking
function Acute warning in displayed in case of the immij
nent danger of a collision when the vehicle apj
proaches another object at a high differential
speed.
The driver must intervene actively when there
is an acute warning. If necessary, the driver is assisted by an automatic braking interventionin a possible risk of collision.
Acute warnings can also be triggered without
previous forewarning.
Braking
intervention
The detection of objects can be influenced by
technical system limitations, e.g. pedestrians or stationary objects. Limitations of the detecj
tion range and functional restrictions are to be considered.
The warning prompts the driver himself/herself
to react. During a warning, the maximum brakj
ing force is used. Premise for the brake boosj
ter is sufficiently quick and hard stepping on the brake pedal. The system can assist withautomatic braking intervention if there is risk of
a collision. The intervention can bring the vehij
cle to a complete stop.
Manual transmission: During a braking interj
vention up to a complete stop, the engine may
be shut down.
The braking intervention is executed only if vej
hicle stability has not been restricted, e.g. by deactivating the DSC Dynamic Stability Conj
trol.
Above approx. 130 mph/210 km/h the braking
intervention occurs as a brief braking pressure.
No automatic delay occurs.
The braking intervention can be interrupted by
stepping on the accelerator pedal or by acj tively moving the steering wheel.Seite 116ControlsSafety116
Online Edition for Part no. 01 40 2 973 409 - VI/16

System
limits
Safety
information WARNING
The system can react incorrectly or not
at all due to the system limits. There is a risk of
accidents or risk of property damage. Observe the information regarding the system limits
and actively intervene, if needed.'

the extended area only if they are moving inthe direction of the central area.
Safety
information WARNING
Indicators and warnings do not relieve
the driver from personal responsibility. Due to
system limits, warnings or reactions of the sysj tem may not be output or they may be output
too late or incorrectly. There is a risk of an acj
cident. Adjust the driving style to the traffic conditions. Watch traffic closely and activelyintervene in the respective situations.'

on the brake pedal. The system can assist withsome braking intervention if there is a risk of acollision. At low speeds vehicles may thus
come to a complete stop.
Manual transmission: During a braking interj
vention up to a complete stop, the engine may
be shut down.
The braking intervention is executed only if vej
hicle stability has not been restricted, e.g., by
deactivating the DSC Dynamic Stability Conj
trol.
The braking intervention can be interrupted by
stepping on the accelerator pedal or by acj
tively moving the steering wheel.
Object detection can be restricted. Observe
the limitations of the detection range and funcj
tional restrictions.
System
limits
Safety
information WARNING
The system can react incorrectly or not
at all due to the system limits. There is a risk of
accidents or risk of property damage. Observe the information regarding the system limits
and actively intervene, if needed.'

Safety
informationWARNING
The system does not release the driver
from the personal responsibility to correctly assess route and traffic situation. There is a
risk of an accident. Adjust the driving style to
the traffic conditions. Watch traffic closely and actively intervene in the respective situations.In the event of a warning, do not unnecessarily
jerk the steering wheel.'