BMW 4 SERIES COUPE 2017 Owners Manual

4.Likewise, press and hold the button of the
desired function on the hand-held transj mitter.5.Release both buttons as soon as the intej
rior mirror LED flashes more rapidly. The LED flashing faster indicates that the butj
ton on the interior mirror has been proj
grammed. The system can then be conj
trolled by the button on the interior mirror.
If the LED does not flash faster after at
least 60 seconds, change the distance and
repeat the step. Several more attempts at different distances may be necessary. Wait
at least 15 seconds between attempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior mirror button and repeatj
edly press and release the hand-held
transmitter button for 2 seconds.
Operation
WARNING
Body parts can be jammed when operatj
ing remote-controlled systems, e.g., the gaj
rage door, using the integrated universal rej
mote control. There is a risk of injury or risk of
property damage. Make sure that the area of movement of the respective system is clear
during programming and operation. Also follow
the safety instructions of the hand-held transj
mitter.'

World
map
with
magnetic
zonesProcedure1.Press and hold the control button for apjprox. 3 to 4 seconds. The number of theset compass zone appears in the mirror.2.To change the zone setting, press the conj
trol button quickly and repeatedly until the
number of the compass zone that correj sponds with your location appears in the
mirror.
The set zone is stored automatically. The comj
pass is ready for use again after approximately
10 seconds.
Calibrating
the
digital
compass
The digital compass must be calibrated in the
event of the following:
'yThe wrong compass point is displayed.'yThe point of the compass displayed does not change despite changing the directionof travel.'yNot all points of the compass are disj
played.Procedure1.Make sure that there are no large metallic
objects or overhead power lines near the
vehicle and that there is sufficient room to
drive around in a circle.2.Set the currently applicable compass zone.3.Press and hold the control button for apj prox. 6 to 7 seconds so that "C" appears
on the display. Next, drive in a complete circle at least once at a speed of no more
than 4 mph/7 km/h. If calibration is sucj
cessful, the "C" is replaced by the points of
the compass.
Left/right-hand
steering
The digital compass is already set for right or
left-hand steering at the factory.
Setting
the
language
Press and hold the control button for approx.
12 to 13 seconds. Briefly press the control
button again to switch between English "E" and German "O".
Seite 162ControlsInterior
equipment162
Online Edition for Part no. 01 40 2 973 409 - VI/16

Settings are stored automatically after approxijmately 10 seconds.
Sun
visor
Glare
shield Fold the sun visor down or up.
Vanity
mirror A vanity mirror is located in the sun visor bejhind a cover. When the cover is opened, themirror lighting switches on.
Ashtray/cigarette
lighterAshtray
Opening
Slide the cover forward.
Installing
The ashtray can be inserted in both cup holdj ers.
Emptying
Take out the insert.
Lighter WARNING
Contact with hot heating elements or the
hot socket of the cigarette lighter can cause
burns. Flammable materials can ignite if the cigarette lighter falls down or is held against
the respective objects. There is a risk of fire
and injuries. Hold the cigarette lighter by its
handle. Make sure that children do not use the
cigarette lighter and do not burn themselves,
e.g., by carrying the remote control with you
when exiting the vehicle.'

Push in the lighter.
The lighter can be removed as
soon as it pops back out.
Sockets
General
information The lighter socket can be used as a socket for
electrical equipment while the engine is runj ning or when the ignition is switched on.
The total load of all sockets must not exceed
140 watts at 12 volts.
Do not damage the socket by using non-comj
patible connectors.
Safety
information NOTE
Battery chargers for the vehicle battery
can work with high voltages and currents, which means that the 12 volt on-board netjwork can be overloaded or damaged. There isa risk of property damage. Only connect batjtery chargers for the vehicle battery to thestarting aid terminals in the engine compartj
ment.'

In
the
cargo
area
The socket is located on the left side in the
cargo area.
USB
interface/AUX-IN
port
Concept
Mobile devices with USB port can be conj
nected to the USB interface.
A mobile audio device, e.g., a MP3 player, can
be connected using the AUX-IN port.
General
information Depending on the equipment, the USB interj
face is located in the center console or in the
glove compartment.
USB
interface
in
the
glove
compartment
Mobile storage devices with USB port can be
connected to the USB interface in the glove
compartment.
Common file systems are supported. FAT32 and exFAT are the recommended formats.
The following applications are possible:
'yExporting and importing profiles, refer to
page 42.'yLoading of software updates.'yAdding music files to the music collection
and saving the music collection.USB
interface
in
the
center
console
In addition to the USB storage devices descrijbed above, additional mobile devices with USB
port can be connected to the USB interface in
the center console.'yMobile phones supported by the USB inj
terface.
The snap-in adapter features a separate USB port that is automatically connected
when a compatible mobile phone is inj
serted.'yAudio devices with USB port, for example
MP3 player.
This allows further uses:
'yPlaying music files via USB audio.'yPlaying video films via USB video.
Information about compatible USB devices can be found at www.bmwusa.com/bluetooth.
Overview
The USB interface and the AUX-IN port are loj cated in the center armrest.
The USB interface is located in the glove comjpartment.
Seite 165Interior
equipmentControls165
Online Edition for Part no. 01 40 2 973 409 - VI/16

Connecting
an
external
deviceObserve the following when connecting:'yDo not use force when plugging the conjnector into the USB interface.'yUse a flexible adapter cable.'yProtect the USB storage device againstmechanical damage.'yDue to the large number of USB mediaavailable on the market, it cannot be guarj
anteed that every device is operable on the
vehicle.'yDo not expose USB media to extreme envij
ronmental conditions, such as very high
temperatures; refer to the device owner's manual.'yDue to the many different compressiontechniques, proper playback of the media
stored on the USB storage device cannot
be guaranteed in all cases.'yA connected USB storage device will be
supplied with charging current via the USB interface if the device supports this.'yTo ensure proper transmission of thestored data, do not charge a USB storage
device via the onboard socket, when it is
connected to the USB interface.'yDepending on how the USB storage device should be used, settings may be required
on the USB storage device, refer to the dej
vice owner's manual.
Non- compatible USB media:
'yUSB hard drives.'yUSB hubs.'yUSB memory card readers with multiple inj
serts.'yHFS-formatted USB media.'yMTP devices.'yDevices such as fans or lights.Through-loading
system
Concept
The cargo area can be enlarged by folding
down the rear seat backrest.
The rear seat backrest is divided into two parts at a ratio of 60 to 40.
With through-loading system: the rear seat backrest is divided into three parts at a
40/20/40 ratio.
The sides can be folded down separately or toj
gether.
Safety
information WARNING
Danger of jamming with folding down the
backrests. There is a risk of injury or risk of property damage. Make sure that the area ofmovement of the rear backrest and the of thehead restraint is clear prior to folding down.'

Opening1.Pull the corresponding lever in the cargo
area to release the rear seat backrest.2.The unlocked backrest moves forward
slightly.3.Fold backrest forward.
Closing
WARNING
With an unlocked backrest, an unsecured
load can be thrown into the vehicle's interior, e.g., in case of an accident, braking or evasivemaneuver. There is a risk of injury. Make sure
that the backrest engages into the locking afj ter folding it back.'

Storage
compartmentsVehicle
features
and
optionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable country provisions
must be observed.
Safety
information WARNING
Loose objects or devices with a cable
connection to the vehicle, e.g., mobile phones, can be thrown into the vehicle's interior while
driving, e.g., in the event of an accident or durj
ing braking and evasive maneuvers. There is a risk of injury. Secure loose objects or devices
with a cable connection to the vehicle in the
vehicle's interior.'

ClosingFold cover closed.
Locking The glove compartment can be locked with an
integrated key to separately secure the tailj gate, refer to page 42, e.g.
This prevents access to the glove compartj ment and to the cargo area.
After the glove compartment is locked, the rej
mote control can be handed over, such as at a
hotel, without the integrated key.
Driver's
side
Safety
information WARNING
Folded open, the glove compartment
protrudes in the vehicle's interior. Objects in the glove compartment can be thrown into thevehicle's interior while driving, e.g., in the eventof an accident or during braking and evasive
maneuvers. There is a risk of injury. Always close the glove compartment immediately after
using it.'

Repositioning
Center armrest can be pushed forwards or backwards. It engages in the end positions.
Connection
for
an
external
audio
device
An external audio device, e.g.,
an MP3 player, can be conj
nected via the AUX-IN port or the USB audio interface in the
center armrest.
Storage
compartment
in
the
rear
A storage compartment is located in the center armrest.
Storage
compartment between
the
rear
seats
There is a storage compartment between therear seats.
Cup
holders
Safety
information WARNING
Unsuitable containers in the cup holder
and hot beverages can damage the cup holder and increase the risk of injury in the event of anaccident. There is a risk of injury or risk ofproperty damage. Use light-weight, unbreakajble, and sealable containers. Do not transport
hot beverages. Do not force objects into the
cup holder.'