BMW 4 SERIES COUPE 2019 Owners Manual

Page 171 of 312

damage to property. Do not deactivate DSC
Dynamic Stability Control when driving with
roof load.
Overview Buttoninthevehicle
DSC OFF button
Indicator/warninglights The indicator light flashes: DSC controls
the drive and braking forces.
The indicator light lights up: DSC has
malfunctioned.
DeactivatingDSC:DSCOFF Generalinformation
When DSC is deactivated, driving stability is rej duced during acceleration and when driving incurves.
To increase vehicle stability, activate DSC again as soon as possible.
DeactivatingDSC Press and hold this button but not lonj
ger than approx. 10 seconds, until the
indicator light for DSC OFF lights up in the inj strument cluster and displays DSC OFF.
DSC is switched off.
The steering and, depending on the equipment,
suspension are tuned for sporty driving.
ActivatingDSC Press button.
DSC OFF and the DSC OFF indicator
light go out.
Indicator/warninglights When DSC is deactivated, DSC OFF is displayedin the instrument cluster.
The indicator light lights up: DSC is dej
activated.
DTCDynamicTraction Control
Concept DTC is a version of the DSC Dynamic Stability
Control where forward momentum is optimized.
The system ensures maximum headway on spej
cial road conditions or loose road surfaces, for inj
stance unplowed snowy roads, but with somej
what limited driving stability.
When DTC is activated, the vehicle has maxij
mum traction. Driving stability is limited during
acceleration and when driving in curves.
Drive carefully.
You may find it useful to briefly activate DTC unj
der the following special circumstances:
'xWhen driving in slush or on uncleared, snow- covered roads.'xWhen driving off from deep snow or looseground.'xWhen driving with snow chains.Seite 171DrivingstabilitycontrolsystemsCONTROLS171
Online Edition for Part no. 01402989120 - II/18

Page 172 of 312

Deactivating/activatingDTC
DynamicTractionControl
ActivatingDTC Press button.
TRACTION is displayed in the instruj
ment cluster and the indicator light for DSC OFF lights up.
DeactivatingDTC Press button again.
TRACTION and the DSC OFF indicator
light go out.
xDrive
xDrive is the all-wheel-drive system of your vehij
cle. Concerted action by the xDrive and DSC Dyj namic Stability Control further optimizes traction
and driving dynamics. The xDrive all-wheel-drive
system variably distributes the drive forces to the
front and rear axles as demanded by the driving
situation and road surface.
Adaptivechassis
Concept
This system reduces undesirable vehicle motion
when using a dynamic driving style or traveling on uneven road surfaces.
This enhances the driving dynamics and driving
comfort depending on the road surface condition
and driving style.
Programs
The system offers several different programs.
The programs can be selected via Driving Dyj
namics Control.
SPORT
Consistently sporty control of the shock absorbj ers for greater driving agility.
SPORT+
Consistently sporty control of the shock absorbj
ers for greater driving agility when driving with limited driving stabilization.
COMFORT/ECOPRO
Balanced control of the vehicle.
Variablesportsteering
The support offered by the variable sport steerj ing changes according to the angle by which thesteering wheel has been turned and the speed.
So, for instance the steering angle of the front
wheels is made larger when parking or taking tight corners. This makes it easier to drive
around bends.
Furthermore, the system provides the steering
with more support at low speeds than at higher
ones. This makes it easier to park, for instance, and makes steering more direct when driving at
faster speeds.
By taking the angle by which the steering wheel has been turned and the speed into account, a
sporty steering response adapted to the particuj lar driving situation can be achieved.
DrivingDynamicsControl
Concept
The Driving Dynamics Control helps to fine-tune
the vehicle's settings and features. Various proj
grams can be selected for this purpose. The Driving Dynamics Control and the DSC OFF butjtons can each be used to activate a program.
Seite 172CONTROLSDrivingstabilitycontrolsystems172
Online Edition for Part no. 01402989120 - II/18

Page 173 of 312

OverviewButtoninthevehicle
Operatingtheprograms
ButtonProgramDSC OFF
TRACTIONSPORT+
SPORT
COMFORT
ECO PRO
Automaticprogramchange
The system may automatically switch to COMj FORT in the following situations:
'xIf the adaptive chassis fails.'xFailure of DSC Dynamic Stability Control.'xThe vehicle has a flat tire.'xWhen activating cruise control in TRACTIONor DSC OFF mode.
DSCOFF
When DSC OFF, refer to page 171, is active,
driving stability is limited during acceleration and
when driving in curves.
TRACTION
When TRACTION is active, the vehicle has maxij mum traction on loose road surfaces. DTC Dyj
namic Traction Control, refer to page 171, is actij
vated. Driving stability is limited during
acceleration and when driving in curves.
SPORT+
Concept Sporty driving with optimized chassis and susj
pension and adjusted drivetrain with limited drivj
ing stabilization.
Generalinformation Dynamic Traction Control is switched on.
The driver handles several of the stabilization tasks.
ActivatingSPORT+ Press button repeatedly until SPORT+
appears in the instrument cluster and
the DSC OFF indicator light lights up.
Automaticprogramchange
When activating cruise control, the program auj
tomatically switches to SPORT mode.
Indicator/warninglights
SPORT+ is displayed in the instrument cluster.
The DSC OFF indicator light is illumij
nated: Dynamic Traction Control DTC is
activated.
SPORT
Concept Depending on the equipment, consistentlysporty tuning of the suspension, steering, anddrivetrain for greater driving agility with maximumdriving stabilization.
The program can be configured to individual
specifications. The configuration is stored for the driver profile currently in use.Seite 173DrivingstabilitycontrolsystemsCONTROLS173
Online Edition for Part no. 01402989120 - II/18

Page 174 of 312

ActivatingSPORTPress button repeatedly until SPORT is
displayed in the instrument cluster.
ConfiguringSPORT Via iDrive:1."My Vehicle"2."Vehicle settings"3.If necessary, "Driving mode"4."Configure SPORT"5.Select the desired setting.
The setting is stored for the driver profile curj
rently used.
COMFORT Concept
For a balanced tuning with maximum driving staj bilization.
ActivatingCOMFORT Press button repeatedly until COMj
FORT is displayed in the instrument
cluster.
In certain situations, the system automatically changes to the NORMAL program, automaticprogram change, refer to page 173.
ECOPRO Concept
ECO PRO provides consistent tuning to minij
mize fuel consumption for maximum range with
maximum driving stabilization.
Comfort functions and the engine Controller are adjusted.
The program can be configured to individual
specifications.
ActivatingECOPRO
Press button repeatedly until ECO PRO
is displayed in the instrument cluster.
ConfiguringECOPRO
Via iDrive:1."My Vehicle"2."Vehicle settings"3.If necessary, "Driving mode"4."Configure ECO PRO"5.Select the desired setting.
The setting is stored for the driver profile curj
rently used.
Configuringdrivingprogram Settings can be made for the following driving
programs in Driving mode:
'xSPORT, refer to page 173.'xECO PRO, refer to page 235.
Displays
Programselection Pressing the button displays a list
of the selectable programs. Dej
pending on your vehicle's optional
features, the list in the instrument
cluster can differ from the illustraj
tion shown.
Selectedprogram The instrument cluster displays
the selected program.
Seite 174CONTROLSDrivingstabilitycontrolsystems174
Online Edition for Part no. 01402989120 - II/18

Page 175 of 312

Drive-offassistant
Concept
This system supports driving off on uphill grades.
The parking brake is not required.
Drivingoffwiththedrive-off
assistant
1.Hold the vehicle in place with the foot brake.2.Release the foot brake and drive off without delay.
After the foot brake is released, the vehicle is
held in place for approx. 2 seconds.
Depending on the vehicle load or when a trailer is
used, the vehicle may roll back slightly.
Servotronic
Concept
Servotronic is a speed-dependent power steerj
ing function.
The system provides the steering force with more support at low speeds than at higher ones.
This makes it easier to park, for instance, and
makes steering more direct when driving at faster speeds.
Furthermore, the steering force adapts according
to the driving program, so that a direct, sporty
feel or a comfortable steering response is conj
veyed.
Seite 175DrivingstabilitycontrolsystemsCONTROLS175
Online Edition for Part no. 01402989120 - II/18

Page 176 of 312

DrivingcomfortVehiclefeaturesandoptions
This chapter describes all standard, country-spejcific and optional features offered with the series. It also describes features that are not necessarilyavailable in your vehicle, e. g., due to the selectedoptions or country versions. This also applies to
safety-related functions and systems. When usj
ing these functions and systems, the applicable laws and regulations must be observed.
ActiveCruiseControlwith Stop&GofunctionACC
Concept
Using this system, a desired speed and a disj
tance to a vehicle ahead can be adjusted using
the buttons on the steering wheel.
The system maintains the desired speed on
clear roads. For this purpose, the vehicle accelerj
ates or brakes automatically.
If a vehicle is driving ahead of you, the system
adjusts the speed of your vehicle so that the set
distance to the vehicle ahead is maintained. The speed is adjusted as far as the given situation alj
lows.
The distance can be adjusted in several steps.
For safety reasons, it depends on the respective
speed.
If the vehicle ahead of you brakes to a halt, and then proceeds to drive again within a brief period,
the system is able to detect this within the given
system limits.
Generalinformation Depending on the driving settings, the features
of the cruise control can change in certain areas.
Safetyinformation
WARNING
The system cannot serve as a substitute for the
driverss personal judgment in assessing the
traffic situation. Based on the limits of the sysj tem, it cannot independently react to all trafficsituations. There is a risk of an accident. Adjust
driving style to traffic conditions. Watch traffic
closely and actively intervene where approprij
ate.
WARNING
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of an accident.
Before exiting, secure the vehicle against rollj
ing.
In order to ensure that the vehicle is secured against rolling away, follow the following:
'xSet the parking brake.'xOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'xOn uphill grades or on a downhill slope, also secure the vehicle, for instance with awheel chock.
WARNING
The desired speed can be incorrectly adjusted
or called up by mistake. There is a risk of an acj
cident. Adjust the desired speed to the traffic conditions. Watch traffic closely and actively inj
tervene where appropriate.
Seite 176CONTROLSDrivingcomfort176
Online Edition for Part no. 01402989120 - II/18

Page 177 of 312

WARNING
Risk of accident due to too high speed differenj
ces to other vehicles, for instance in the followj
ing situations:
'xWhen fast approaching a slowly moving vehicle.'xVehicle suddenly swerving into own lane.'xWhen fast approaching standing vehicles.
There is a risk of injuries or danger to life.
Watch traffic closely and actively intervene
where appropriate.
Overview
Buttonsonthesteeringwheel
ButtonFunctionCruise control on/off, interrupt, refer
to page 177Store, maintain speed, refer to
page 178Resume speed, continue cruise conj
trol, refer to page 179Reduce distance, refer to page 179Increase distance, refer to page 179Rocker switch:
Set speed, refer to page 178
Radarsensor
A radar sensor is located in the front bumper for detecting vehicles on the road ahead of the vehij
cle.
Always keep radar sensor clean and unobj
structed.
Functionalrequirements
Speedrange The system is best used on well-constructed
roads.
The minimum speed that can be set is 20 mph/30 km/h. The maximum speed that can
be set depends on the vehicle.
The system can also be activated when stationj
ary.
Switchingon/offandinterrupting
cruisecontrol
Switchingon Press button on the steering wheel.
The indicator lights in the instrument cluster light up and the mark in the speedometer is set to thecurrent speed.
Cruise control can be used.
DSC Dynamic Stability Control is switched on, if
necessary.
Switchingoff
To switch off the system while standing, step on
brake pedal at the same time.
Press button on the steering wheel.
'xIf active: press twice.Seite 177DrivingcomfortCONTROLS177
Online Edition for Part no. 01402989120 - II/18

Page 178 of 312

'xIf interrupted: press once.
The displays go out. The stored desired speed isdeleted.
Interruptingmanually Press button on the steering wheel.
If interrupting the system while stationary, press on the brake pedal at the same time.
Interruptingautomatically
The system is automatically interrupted in the
following situations:
'xWhen the driver applies the brakes.'xWhen selector lever position D is disengaged.'xDynamic Traction Control DTC is activated or
DSC Dynamic Stability Control is deactivated.'xIf DSC Dynamic Stability Control intervenes.'xWhen SPORT+ is activated with Driving Dyj namics Control.'xIf the safety belt is unbuckled and the driver's
door is opened while the vehicle is standing
still.'xIf the system has not detected objects for an extended period, for instance on a road with
very little traffic without curb or shoulder
markings.'xIf the detection range of the radar is impaired,
for instance by dirt or heavy fog.'xAfter a stationary period of approx. 3 seconds
when the vehicle has been braked to a stop
by the system.Settingthespeed
Maintaining/storingthespeed
Press the rocker switch up or down once whilethe system is interrupted.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
The stored speed is displayed in the speedomej ter and briefly in the instrument cluster, refer to
page 179.
DSC Dynamic Stability Control is switched on, if necessary.
The speed can also be stored by pressjing a button.
Press button.
Changingthespeed
Press the rocker switch up or down repeatedly until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the road is clear.
Seite 178CONTROLSDrivingcomfort178
Online Edition for Part no. 01402989120 - II/18

Page 179 of 312

'xEach time the rocker switch is pressed to thepoint of resistance, the desired speed injcreases or decreases by approx.
1 mph/1 km/h.'xEach time the rocker switch is pressed past
the resistance point, the desired speed
changes by a maximum of 5 mph/10 km/h.
Hold the rocker switch in position to repeat the action.
Adjustingdistance
Safetyinformation
WARNING
The system cannot serve as a substitute for the
driverss personal judgment. Due to the system
limits, braking can be late. There is a risk of acj
cidents or risk of damage to property. Be aware to the traffic situation at all times. Adjust the
distance to the traffic and weather conditions
and maintain the prescribed safety distance,
possibly by braking.
Reducedistance
Press button repeatedly until the dej
sired distance is set.
Instrument cluster will display selected distance,
refer to page 179.
Increasedistance Press button repeatedly until the dejsired distance is set.
Instrument cluster will display selected distance,
refer to page 179.
Continuingcruisecontrol
Generalinformation
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, unintenj tional braking or accelerating may occur.
In the following cases, the stored speed value is
deleted and cannot be called up again:'xWhen the system is switched off.'xWhen the ignition is switched off.
Callingupstoredspeedand
distance
Press button with the system switchedon.
Displaysintheinstrument
cluster
Desiredspeedandstoredspeed
'xMarking lights up green: sysj
tem is active, the marking indij
cates the desired speed.'xMarking lights up orange: sysj
tem is interrupted, the marking
indicates the stored speed.'xThe marking does not light up: the system is switched off.
With instrument display: the symbol isdisplayed in the speedometer similarly to
the mark for the desired speed.
Briefstatusdisplay Selected desired speed.
If no speed is indicated, it is possible that the
conditions necessary for operation are not curj rently fulfilled.
Distancetovehicleaheadofyou
Selected distance to the vehicle ahead of you is
shown.
Seite 179DrivingcomfortCONTROLS179
Online Edition for Part no. 01402989120 - II/18

Page 180 of 312

DistancedisplayDistance 1Distance 2Distance 3Distance 4
This value is set automatically after
the system is switched on.The system has been interrupted or
distance control is temporarily supj
pressed because the accelerator
pedal is being pressed; a vehicle was
not detected.Distance control is temporarily supj
pressed because the accelerator
pedal is being pressed; a vehicle was
detected.
Detectedvehicle
Symbol lights up orange:
A vehicle has been detected ahead of
you.
Rolling bars: the detected vehicle has driven
away.
ACC does not accelerate. To accelerate, activate ACC by briefly stepping on the accelerator pedal or pressing the RES button or the rocker switch.
Indicator/warninglights Symbol flashes orange:
The conditions are not adequate for the
system to work.
The system was deactivated but applies the brakes until you actively resume control bypressing on the brake pedal or accelerator pedal.
Symbol flashes red and a signal sounds:
Brake and make an evasive maneuver, if necessary.
DisplaysintheHead-upDisplay Some system information can also be displayedin the Head-up Display.
Systemlimits
Detectionrange
The detection capacity of the system and the
automatic braking capacity are limited.
Two-wheeled vehicles driving ahead of you
for instance might not be detected.
Deceleration
The system does not decelerate when a stationj
ary obstacle is located in the same lane, for inj stance a vehicle at a red traffic light or at the endof traffic congestion.
The system also does not react in the following
situations:
'xFor pedestrians or similarly slow-moving road users.'xFor red traffic lights.'xStationary objects.'xFor cross traffic.'xFor oncoming traffic.Seite 180CONTROLSDrivingcomfort180
Online Edition for Part no. 01402989120 - II/18

Page:   < prev 1-10 ... 131-140 141-150 151-160 161-170 171-180 181-190 191-200 201-210 211-220 ... 320 next >