BMW 4 SERIES COUPE 2019 Owners Manual

Rear
NOTE
With an open cup holder, the center armrest
cannot be folded back up. There is a risk of damage to property. Press back the covers bejfore the center armrest is folded up.
In the center armrest.
Pull the center armrest forward at the strap.
To open: press the button.
To close: push both covers back in, one after the
other.
Clothes
hooks
Safety
information
WARNING
Clothing articles on the clothes hooks can obj struct the view while driving. There is a risk of
an accident. When suspending clothing articles from the clothes hooks, ensure that they will
not obstruct the driver's view.
WARNING
Improper use of the clothes hooks can lead to a
risk of objects flying about during braking and
evasive maneuvers. There is a risk of injury and
risk of damage to property. Only hang lightj
weight objects, for instance clothing articles,
from the clothes hooks.
General
information
Press on the top edge to fold open.
Storage
compartments
in the
cargo
area
Storage
compartment
A storage compartment is located on the left
side.
A storage compartment is located on the right side.
Net Small objects can be stowed in the net on theleft side.
Multi-function
hook Information
WARNING
Improper use of the multi-function hooks can
lead to a risk of objects flying about during braking and evasive maneuvers, for example.
There is a risk of injury and risk of damage to property. Only hang lightweight objects,
such as shopping bags, from the multi-function
Seite 221Storage
compartmentsCONTROLS221
Online Edition for Part no. 01402989120 - II/18

hooks. Only transport heavy luggage in the
cargo area if it has been appropriately secured.
Overview
A multi-function hook is located on each side of
the cargo area.
Lashing
eyes
in
the
cargo
area To secure the cargo, refer to page 231, there
are four lashing eyes in the cargo area.
Floor
net
To secure the cargo, refer to page 231, the floor
net can also be used.
Storage
compartment
under
the
cargo
floor
panel
For the storage compartment under the cargo
floor panel, do not exceed a maximum load of
44 lbs/20 kg.
Raise the cargo floor panel, arrow 1, and latch at
top, if needed, arrow 2.
Seite 222CONTROLSStorage
compartments222
Online Edition for Part no. 01402989120 - II/18

Seite 223Storage
compartmentsCONTROLS223
Online Edition for Part no. 01402989120 - II/18

224
Online Edition for Part no. 01402989120 - II/18

DRIVING
TIPS
Things
to
remember
when
driving

226
Loading

230
Saving
fuel

233225
Online Edition for Part no. 01402989120 - II/18

Things
to
remember
when
drivingVehicle
features
andoptions
This chapter describes all standard, country-spejcific and optional features offered with the series. It also describes features that are not necessarilyavailable in your vehicle, e. g., due to the selectedoptions or country versions. This also applies to
safety-related functions and systems. When usj
ing these functions and systems, the applicable laws and regulations must be observed.
Breaking-in
period
General
information Moving parts need to begin working together
smoothly.
The following instructions will help you to achj ieve a long vehicle life and good efficiency.
During break-in, do not use the Launch Control.
Safety
information
WARNING
Due to new parts and components, safety and driver assistance systems can react with a dej
lay. There is a risk of an accident. After instalj
ling new parts or with a new vehicle, drive conj
servatively and intervene early if necessary.
Observe the break-in procedures of the rej
spective parts and components.
Engine,
transmission,
and
axle
drive
Up
to
1,200
miles/2,000
km Do not exceed the maximum engine and roadspeed:'xFor gasoline engine 4,500 rpm and
100 mph/160 km/h.
Avoid full load or kickdown under all circumstanj ces.
From
1,200
miles/2,000
km
The engine and vehicle speed can gradually be increased.
Tires Tire traction is not optimal due to manufacturing
circumstances when tires are brand-new; they achieve their full traction potential after a break-intime.
Drive conservatively for the first
200 miles/300 km.
Brake
system Brake discs and brake pads only reach their full
effectiveness after approx. 300 miles/500 km. Drive moderately during this break-in period.
Clutch The function of the clutch reaches its optimal
level only after a distance driven of approx.
300 miles/500 km. During this break-in period,
engage the clutch gently.
Following
part
replacement The same break-in procedures should be obj
served if any of the components above-menj
tioned have to be renewed in the course of the
vehicle's operating life.
Seite 226DRIVING
TIPSThings
to
remember
when
driving226
Online Edition for Part no. 01402989120 - II/18

General
driving
notes
Closing
the
tailgate
Safety
information
WARNING
An open tailgate protrudes from the vehicle and can endanger occupants and other traffic parj ticipants or damage the vehicle in the event of
an accident, braking or evasive maneuvers. In
addition, exhaust fumes may enter the car's inj
terior. There is a risk of injury or risk of damage
to property. Do not drive with the tailgate open.
Driving
with
the
tailgate
open
If driving with the tailgate open cannot be
avoided:
'xClose all windows and the glass sunroof.'xGreatly increase the air flow from the vents.'xDrive moderately.
Hot
exhaust
gas
system
WARNING
During driving operation, high temperatures can
occur underneath the vehicle body, for instance
caused by the exhaust gas system. If combustij
ble materials, such as leaves or grass, come in contact with hot parts of the exhaust gas sysj
tem, these materials can ignite. There is a risk of injury or risk of damage to property. Do not
remove the heat shields installed and never apj
ply undercoating to them. Make sure that no
combustible materials can come in contact with hot vehicle parts in driving operation, idle or
during parking. Do not touch the hot exhaust gas system.
Mobile
communication
devices
in
the
vehicle
WARNING
Vehicle electronics and mobile phones can inj fluence one another. There is radiation due to
the transmission operations of mobile phones.
There is a risk of injury or risk of damage to
property. If possible, in the car's interior use only mobile phones with direct connections to
an exterior antenna in order to exclude mutual interference and deflect the radiation from thecar's interior.
Hydroplaning
On wet or slushy roads, a wedge of water canform between the tires and road surface.
This phenomenon is referred to as hydroplaning.
It is characterized by a partial or complete loss of
contact between the tires and the road surface,
ultimately undermining your ability to steer and
brake the vehicle.
Driving
through
water
General
information When driving through water, follow the following:
'xDrive through calm water only.'xDrive through water only if it is not deeper
than maximum 9.8 in/25 cm.'xDrive through water no faster than walking
speed, up to 3 mph/5 km/h.
Safety
information
NOTE
When driving too quickly through too deep waj
ter, water can enter into the engine compartj ment, the electrical system or the transmission.There is a risk of damage to property. When
driving through water, do not exceed the maxij
Seite 227Things
to
remember
when
drivingDRIVING
TIPS227
Online Edition for Part no. 01402989120 - II/18

mum indicated water level and the maximumspeed for driving through water.
Braking
safely
General
information The vehicle is equipped with ABS as a standard
feature.
Perform an emergency stop in situations that rej
quire such.
Steering is still responsive. You can still avoid any
obstacles with a minimum of steering effort.
Pulsation of the brake pedal and sounds from the
hydraulic circuits indicate that ABS is in its active mode.
In certain braking situations, the perforated brake
discs can emit functional noises. Functional
noises have no effect on the performance and operational reliability of the brake.
Objects
in
the
movement
area
around
pedals
and
floor
area
WARNING
Objects in the driver's floor area can limit the pedal distance or block a depressed pedal.
There is a risk of an accident. Stow objects in
the vehicle such that they are secured and canj not enter into the driver's floor area. Use floor
mats that are suitable for the vehicle and can
be safely attached to the floor. Do not use
loose floor mats and do not layer several floor
mats. Make sure that there is sufficient clearj ance for the pedals. Ensure that the floor mats
are securely fastened again after they were rej moved, for instance for cleaning.
Driving
in
wet
conditions
When roads are wet, salted, or in heavy rain, genj
tly press the brake pedal every few miles.
Ensure that this action does not endanger other traffic.
The heat generated during braking dries brake
discs and brake pads and protects them againstcorrosion.
In this way braking efficiency will be available
when you need it.
Hills General
information
Drive long or steep downhill gradients in the gear
that requires least braking effort. Otherwise, the brakes may overheat and reduce brake effij
ciency.
You can increase the engine's braking effect by shifting down, going all the way to first gear, if
needed.
Safety
information
WARNING
Light but consistent brake pressure can lead to
high temperatures, brakes wearing out and
possibly even brake failure. There is a risk of anaccident. Avoid placing excessive stress on the
brake system.
WARNING
In idle state or with the engine switched off, safety-relevant functions, for instance engine
braking effect, braking force boost and steering
assistance, are restricted or not available at all.
There is a risk of an accident. Do not drive in
idle state or with the engine switched off.
Brake
disc
corrosion
Corrosion on the brake discs and contamination
on the brake pads are increased by the following
circumstances:
'xLow mileage.'xExtended periods when the vehicle is not
used at all.Seite 228DRIVING
TIPSThings
to
remember
when
driving228
Online Edition for Part no. 01402989120 - II/18

'xInfrequent use of the brakes.'xAggressive, acidic, or alkaline cleaning
agents.
Corrosion buildup on the brake discs will cause a pulsating effect on the brakes in their response -
generally this cannot be corrected.
Condensation
water
under
the
parked
vehicle
When using the automatic climate control, conj
densation water develops and collects underj
neath the vehicle.
Driving
on
racetracks
Higher mechanical and thermal loads during
racetrack operation lead to increased wear. This
wear is not covered by the warranty. The vehicle
is not designed for use in motor sports competij
tion.
Seite 229Things
to
remember
when
drivingDRIVING
TIPS229
Online Edition for Part no. 01402989120 - II/18

LoadingVehicle
features
andoptions
This chapter describes all standard, country-spejcific and optional features offered with the series. It also describes features that are not necessarilyavailable in your vehicle, e. g., due to the selectedoptions or country versions. This also applies to
safety-related functions and systems. When usj
ing these functions and systems, the applicable laws and regulations must be observed.
Safety
information
WARNING
High gross weight can overheat the tires, damj age them internally and cause a sudden drop intire inflation pressure. Driving characteristicsmay be negatively impacted, reducing lane staj
bility, lengthening the braking distances and
changing the steering response. There is a risk
of an accident. Pay attention to the permitted
load capacity of the tires and never exceed the
permitted gross weight.
WARNING
Loose objects or devices with a cable connecj tion to the vehicle, for instance mobile phones,
can be thrown into the car's interior while drivj
ing, for instance in the event of an accident or
during braking and evasive maneuvers. There is
a risk of injury. Secure loose objects or devices
with a cable connection to the vehicle in the
car's interior.
WARNING
Improperly stowed objects can shift and be thrown into the car's interior, for instance in the
event of an accident or during braking and evaj
sive maneuvers. Vehicle occupants can be hit
and injured. There is a risk of injury. Stow and secure objects and cargo properly.
NOTE
Fluids in the cargo area can cause damage.
There is a risk of damage to property. Make
sure that no fluids leak in the cargo area.
Steps
for
Determining
Correct
Load
Limit
1.Locate the statement vThe combined weight
of occupants and cargo should never exceed XXX kg or XXX lbs.w on your vehicless placard.2.Determine the combined weight of the driver
and passengers that will be riding in your vej
hicle.3.Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.4.The resulting figure equals the available
amount of cargo and luggage load capacity. For example, if the vXXXw amount equals
1,400 lbs. and there will be five 150 lb pasj
sengers in your vehicle, the amount of availaj ble cargo and luggage load capacity is
650 lbs. (1,400m750 (5 x 150)  650 lbs.)5.Determine the combined weight of luggage and cargo being loaded on the vehicle. That
weight may not safely exceed the availableSeite 230DRIVING
TIPSLoading230
Online Edition for Part no. 01402989120 - II/18