BMW 5 SERIES GRAN TURISMO 2017 Workshop Manual

Safety
switch
General
information
The following functions can be locked simultaj neously, using the switch:'yOpening and closing of the rear windowsusing the switches in the rear.'yOperation of the roller sunblinds using the
switches in the rear.'yAdjustment of the power rear seats.'yAdjustment of the power head restraints in the rear.
If an accident of a certain severity occurs, thesafety function is switched off automatically.
Switching
on
and
off Press button.
The LED lights up if the safety funcj
tion is switched on.
Roller
sunblinds
General
information The safety switch in the driver's door can be
used to prevent children, for example, from opj
erating the roller sunblinds using the switches
in the rear.
Press the safety switch in the driver's door. The LED lights up if the safety function is
switched on.
If you are no longer able to move the roller sunj blinds after having activated them consecuj tively a number of times, the system is blockedfor a limited time to prevent overheating. Letthe system cool.
The roller sunblinds cannot be moved at low interior temperatures.
Driver's
door
controls
Roller
sunblinds
for
rear
side
windows
Press button.
Rear
door
controls
Roller
sunblinds
for
side
windows Press button.
The roller blind can only be extended or rej tracted when the side window is closed.
Raising
and
lowering
the
roller
sunblinds
together
Press button.
Seite 51Opening
and
closingControls51
Online Edition for Part no. 01 40 2 972 554 - VI/16

Panoramic
glass
sunroof
General
information The glass sunroof and the sliding visor can be
operated together or separately using the
same switch.
The glass sunroof is operational when the ignij
tion is switched on.
Safety
information WARNING
Body parts can be jammed when operatj
ing the glass sunroof. There is a risk of injury.
Make sure that the area of movement of the
glass sunroof is clear during opening and closj ing.'

The sliding visor opens automatically. If thesliding visor is already fully open, the glasssunroof opens automatically.
The glass sunroof closes automatically. If the glass sunroof is already closed or in the
tilted position, the sliding visor closes auj
tomatically.
Pressing the switch upward stops the moj tion.
Opening/closing
the
glass
sunroof
and
sliding
visor
together
Briefly press the switch twice insuccession in the desired direcj tion past the resistance point.
The glass sunroof and sliding vij
sor move together. Pressing the
switch upward stops the motion.
Convenient opening via the remote control, rej
fer to page 35.
Closing by means of Comfort Access, refer to page 39.
Comfort
position
If the glass sunroof is not completely opened
automatically, the comfort position has been
attained. In this position the wind noises in the
interior are the least.
If desired, continue the movement by pressing
the switch.
Pinch
protection
system
General
information If the closing force when closing the glass sunj
roof exceeds a certain value, the closing movej ment is stopped, beginning at approximately
the middle of the opening in the roof, or from
the tilted position during closing. The glass
sunroof reopens slightly.
Closing
from
the
open
position
without
pinch
protection
If there is an external danger, proceed as folj
lows:1.Press the switch forward beyond the rej
sistance point and hold.
The pinch protection is limited and the
glass sunroof reopens slightly if the closing
force exceeds a certain threshold.2.Press the switch forward again beyond the resistance point and hold until the glass
sunroof closes without jam protection. Make sure that the closing area is clear.
Closing
from
the
raised
position
without
pinch
protection
If there is an external danger,
push the switch forward past the
resistance point and hold it.
The glass sunroof closes withj
out jam protection.
Initializing
after
a
power
interruption
General
information After a power failure during the opening orclosing process, the glass sunroof can only be
operated to a limited extent.
The system can be initialized when the vehicle
is stationary and the engine is running.
During the initialization, the glass sunroof
closes without jam protection.
Make sure that the closing area is clear.
Seite 53Opening
and
closingControls53
Online Edition for Part no. 01 40 2 972 554 - VI/16

Initializing
the
systemPress the switch up and hold ituntil the initialization is comj
plete:
Initialization begins within
15 seconds and is completed
when the glass sunroof and sliding visor are completely closed.Seite 54ControlsOpening
and
closing54
Online Edition for Part no. 01 40 2 972 554 - VI/16

SettingsVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable country provisions
must be observed.
Sitting
safely
The ideal seating position meeting the needs
of the occupants can make a vital contribution to relaxed, fatigue-free driving.
The seating position plays an important role in
an accident in combination with:'ySafety belts, refer to page 60.'yHead restraints, refer to page 62.'yAirbags.
Front
seats
Safety
information WARNING
Seat adjustments while driving can lead
to unexpected movements of the seat. Vehicle
control could be lost. There is a risk of an accij
dent. Only adjust the seat on the driver's side
when the vehicle is stationary.'

Seat
tilt
Move switch up or down.
Forward/backward
Pull the lever and slide the seat in the desired direction.
After releasing the lever, move the seat forj
ward or back slightly making sure it engages
properly.
Height
Push switch up or down.
Backrest
tilt
Move switch forward or backward. Electrically
adjustable
seats
Overview
1Thigh support2Forward/back, height, tilt3Shoulder support4Backrest width5Lumbar support6Backrest, head restraint
General
information
The seat setting for the driver's seat is stored
for the profile currently used. When the vehicle
is unlocked via the remote control, the position
is automatically retrieved if the Function is actij
vated for this purpose.
Seite 56ControlsSettings56
Online Edition for Part no. 01 40 2 972 554 - VI/16

Forward/backward
Push switch forward or backward.
Height
Push switch up or down. Seat
tilt
Move switch up or down.
Backrest
tilt
Move switch forward or backward.Thigh
support
Multifunctional
seat
Push switch forward or backward.
Sport
seat
Pull the lever at the front of the seat and adjust the thigh support.
Lumbar
support The curvature of the seat backrest can be adj
justed in a way that it supports the lumbar rej
Seite 57SettingsControls57
Online Edition for Part no. 01 40 2 972 554 - VI/16

gion of the spine. The lower back and thespine are supported for upright posture.'yPress the front/rear section
of the switch:
The curvature is increased/
decreased.'yPress the upper/lower secj
tion of the switch:
The curvature is shifted up/ down.
Backrest
width
To adjust the lateral support, the width of thebackrest can be changed using the side wings.
Press button on the correj
sponding side
Shoulder
support
The shoulder support supports the back in the
shoulder area:
'yResults in a relaxed seating position.'yReduces strain on the shoulder muscles.
Press button on the corresponding side.
Active
seat
The
concept Active adjustment of the seat cushion's conj
tours reduces muscular tension and fatigue to help prevent lower back pain.
Overview
Press button. The LED lights up.
Front
seat
heating
Overview
Seat heating
Switching
on Press button once for each temperajture level.
The maximum temperature is reached when three LEDs are lit.
If the trip is continued within approx. 15 mij
nutes after a stop, seat heating is activated auj
tomatically with the temperature selected last.
When ECO PRO is activated, the heater output
is reduced.
Switching
off Press and hold the button, until the
LEDs go out.
Seite 58ControlsSettings58
Online Edition for Part no. 01 40 2 972 554 - VI/16

Temperature
distribution
The heating action in the seat cushion and
backrest can be distributed in different ways.
About iDrive:1."Climate"2."Front seat heating"3.Select desired seat.4.Turn the Controller to set the temperature distribution.
Active
seat
ventilation,
front
The
concept The seat cushion and backrest surfaces are
cooled by means of integrated fans.
The ventilation cools the seat, e.g., if the vehij
cle interior is overheated or for continuous cooling at high temperatures.
Overview
Active seat ventilation
Switching
on Press button once for each ventilation
level.
The highest level is active when three LEDs are lit.
After a short time, the system automatically moves down one level in order to prevent exj
cessive cooling.
Switching
off
Press and hold the button, until the
LEDs go out.
Rear
seats Overview1Forward/backward2Backrest
Forward/backward
Pull the lever and slide the seat in the desireddirection.
After releasing the level, move the seat forward or back slightly, until it engages.
Seite 59SettingsControls59
Online Edition for Part no. 01 40 2 972 554 - VI/16

Backrest
tilt
Pull the lever and apply your weight to the
backrest or lift it off.
Rear
seat
heating
Overview
Seat heating
Switching
on Press button once for each temperajture level.
The maximum temperature is reached when three LEDs are lit.
If the trip is continued within approx. 15 mij
nutes after a stop, seat heating is activated auj
tomatically with the temperature selected last.
When ECO PRO is activated, the heater output
is reduced.
Switching
off Press and hold the button, until the
LEDs go out.
Safety
belts
Number
of
safety
belts
The vehicle is fitted with four or five safety
belts to ensure occupant safety. However, they can only offer protection when adjusted corjrectly.
The two outer safety belt buckles, integrated
into the rear seat, are for passengers sitting on the left and right.
The center rear safety belt buckle is solely inj tended for the center passenger.
General
information
Always make sure that safety belts are being
worn by all occupants before driving off. Alj
though airbags enhance safety by providing
added protection, they are not a substitute for
safety belts.
Slowly guide the safety belt out of the holder
when fastening it.
The upper shoulder strap's anchorage point
will be correct for adult seat occupants of evj
ery build if the seat is correctly adjusted.
Safety
information WARNING
If the safety belt is used by more than
one person, the protective effect of the safety belt cannot be ensured anymore. There is a
risk of injuries or danger to life. Do not allow
more than one person to wear a single safety
belt. Infants and children are not allowed on an
occupant's lap, but must be transported and respectively secured in designated child rej
straint systems.'