BMW 6 SERIES CONVERTIBLE 2018 Owner's Manual

Distance
to
the
back
of
the
head'xForward: pull the head restraint toward thefront.'xBack: press the button and push the head rej
straint toward the rear.
Adjusting
the
side
extensions
Fold forward to increase lateral support.
Adjusting
the
exterior
mirrors
1Settings2Left/right, Automatic Curb Monitor3Folding in and outAdjusting
the
steering
wheel
Electrical
steering
wheel
adjustment
Move the steering wheel to the preferred height
and angle to suit your seating position by pressj
ing the switch.
Memory
function
Concept
The following settings can be stored and, if necj essary, retrieved using the memory function:
'xSeat position.'xExterior mirror position.'xSteering wheel position.
Storing
1.Switch on the ignition.2.Set the desired position.3. Press button on the seat. The LED
in the button lights up.4.Press the desired button 1 or 2 on the seat
while the LED is illuminated. The LED goes
out.
Calling
up
settings
The stored position is called up automatically.
Press selected button 1 or 2.
The procedure stops when a switch for setting
the seat or one of the memory buttons is
pressed.
Seite 21Your
BMW
at
a
glanceQUICK
REFERENCE21
Online Edition for Part no. 01402988494 - II/18

While driving, the seat position adjustment onthe driver's side is interrupted after a short time.
Entering
the
rear Unlocking
the
backrest1.Pull lever up to the stop.2.Fold backrest forward.
Changing
the
seat
position
To change the entry area, press and hold thebutton until the seat has moved to the desired
position.
Fold
back
and
locking
the
backrest
After entering the rear, fold the backrest back and lock it.
Press button. The seat moves to its origij
nal position. Pressing again stops the moj
tion.
Displays
and
control
elements
In
the
vicinity
of
the
steering
wheel
1Light switch element2Turn signal indicator, high beams3Instrument cluster4Start/Stop button5Wipers
Indicator/warning
lights
Instrument
clusterThe indicator/warning lights can light up in a varijety of combinations and colors.
Several of the lights are checked for proper funcj tioning and light up temporarily when the engine
is started or the ignition is switched on.
Seite 22QUICK
REFERENCEYour
BMW
at
a
glance22
Online Edition for Part no. 01402988494 - II/18

Driver's
door1Rear window2Side windows and rear window3Power windows4Exterior mirrors
Switch
console
1Selector lever2Controller3Parking brake, Automatic Hold4Parking assistance systems5Driver assistance systems
iDrive
Concept The iDrive combines the functions of manyswitches. Thus, these functions can be operatedfrom a central location.
Controller
General
information
The buttons can be used to open the menus dij
rectly. The Controller can be used to select
menu items and enter the settings.
Buttons
on
the
ControllerButtonFunctionMENUOpens the main menu.RADIOOpens the Radio menu.MEDIAOpens the Multimedia menu.NAVOpens the Navigation menu.TELOpens the Phone menu.BACKDisplays the previous display.OPTIONOpen the Options menu.
Voice
activation
Using
the
voice
activation
system
Activating
the
voice
activation
system
1. Press button on the steering wheel.2.Wait for the signal.3.Say the command.
A command that is recognized by the voice
activation system is announced and displayed
in the instrument cluster.
This symbol in the instrument cluster indij
cates that the voice activation system is active.
If no other commands are possible, operate the
function via iDrive.
Terminating
the
voice
activation
system Press the button on the steering wheel
or 

Help
dialog
for
the
voice
activation
systemCalling up help dialog: 

Steptronic
transmission
Engaging
selector
lever
positions
Press button to:
'xEngage R.'xShift out of P.
To prevent the vehicle from creeping after you
select a drive mode or reverse, maintain pressure on the brake pedal until you are ready to start.
Engage selector lever position P or R only when
the vehicle is stationary.
Engaging
D,
R
and
N
'xNeutral N.'xDrive mode D.'xReverse R.
The selector lever returns to the center position
in each case.
Engaging
P
Press button P.
Steptronic
transmission,
Sport
and
manual
mode
Sport/manual
mode
Sport program:
Press the selector lever to the left out of selector lever position D.
Manual mode:
'xTo shift down: press the selector lever forj ward.'xTo shift up: pull the selector lever rearwards.Seite 25Your
BMW
at
a
glanceQUICK
REFERENCE25
Online Edition for Part no. 01402988494 - II/18

High
beams,
headlight
flasher,
turn
signal,
roadside
parking
light
High
beams,
headlight
flasher
Push the lever forward or pull it backward.
'xHigh beams, arrow 1.'xHeadlight flasher, arrow 2.
Turn
signal
'xOn: press the lever past the resistance point.'xOff: lightly tap the lever to the resistance point.'xTriple turn signal activation: lightly tap the
lever up or down.'xBrief signaling: press the lever to the resistj ance point and hold it there for as long as you
want the turn signal to flash.Roadside
parking
light
Illuminate the vehicle on one side.
'xOn: with the ignition switched off, press the lever either up or down past the resistancepoint for approx. 2 seconds.'xOff: briefly press the lever to the resistance
point in the opposite direction.
Lights
and
lighting
Light
functions
SymbolFunctionFront fog lights.Automatic headlight control.
Adaptive light functions.Lights off.
Daytime running lights.Parking lights.Low beams.Instrument lighting.Seite 26QUICK
REFERENCEYour
BMW
at
a
glance26
Online Edition for Part no. 01402988494 - II/18

Washer/wiper
system
Switching
the
wipers
on/off
and
brief
wipe
Switching
on'xNormal wiper speed: tap up once.'xFast wiper speed: tap up twice or tap once
beyond the resistance point.
Brief
wipe
and
switching
off
Push wiper lever down.
'xBrief wipe: press down once.'xTo switch off normal wipe: press down once.'xTo switch off fast wipe: press down twice.Rain
sensor
Activating/deactivating
Press button on the wiper lever.
Adjusting the sensitivity:
Turn the thumbwheel on the wiper lever.
Cleaning
the
windshield
and
headlights
Pull the wiper lever towards you.
Seite 27Your
BMW
at
a
glanceQUICK
REFERENCE27
Online Edition for Part no. 01402988494 - II/18

Climate
control
Automatic
climate
control
ButtonFunctionTemperature.Air conditioning.Maximum cooling.AUTO program.Recirculated-air mode/AUC.Air flow, manual.Air distribution, manual.SYNC program.Defrost and defog window.Rear window defroster.Active seat ventilation.Seat heating.Infotainment
Radio
Control
elements
1Changing the entertainment source2CD/DVD drive3Eject CD/DVD4Change station/track5Programmable memory buttons6Sound output on/off, volume7Change waveband
Navigation
destination
entry Entering
a
destination
manually
1."Navigation"2."Enter address"
State/province
1.Select "State/Province" or the displayedstate/province.
Entering
the
address
The address can be entered via the house numj
ber, street, town/city or intersection.
Example: entering an address via the street
1."Street"2.Enter the street.Seite 28QUICK
REFERENCEYour
BMW
at
a
glance28
Online Edition for Part no. 01402988494 - II/18

The list is narrowed down further with eachentry.3."OK"4.Select the street from the list.5.Enter the town/city.6.Select the town/city as you would the street.
Starting
destination
guidance
"Start guidance" or "Add as another dest."
If only the town/city was entered: destinationguidance is started to the town/city center.
Connecting
a
mobile
phone
Connecting
a
mobile
phone After the mobile phone is connected once to the
vehicle, the mobile phone can be operated using iDrive, the steering wheel buttons and spoken inj
structions.
1."Settings"2."Connections"3."Bluetoothn"4."Add new device"
The Bluetooth name of the vehicle is disj played on the Control Display.5.To perform additional steps on the mobile
phone, refer to the mobile phone owner's manual: e.g., search for or connect the Bluej
tooth device or a new device.
The Bluetooth name of the vehicle appears
on the mobile phone display.6.Select the Bluetooth name of the vehicle on
the mobile phone display.7.You are prompted by the iDrive or mobile phone to enter the same Bluetooth passkey.Enter the passkey and confirm.
Or
Compare the control number on the Control
Display of the vehicle with the control number
on the display of the mobile phone. Confirmthe control number in the mobile phone and
on the Control Display.
"OK"8.Select the functions for which the mobile phone is to be used.9."OK"
The mobile phone is connected and will appear
at the top of the list of mobile phones.
Using
the
phone
Accepting
a
call Incoming call can be accepted via iDrive or the
button on the steering wheel.
Via
iDrive
"Accept"
Via
the
button
on
the
steering
wheel Press button.
Via
the
instrument
cluster
Use the thumbwheel on the steering wheel to
select: "Accept"
Dialing
a
number
1."Telephone"2."Dial number"3.Select the numbers individually.4. Select the symbol.
If connection is to be set up via telephone 2:
1.Select the numbers individually.2.Open "Options".3."Call via"Seite 29Your
BMW
at
a
glanceQUICK
REFERENCE29
Online Edition for Part no. 01402988494 - II/18

Refueling
RefuelingFuel
cap
1.Press the rear edge of the fuel filler flap toopen it.2.Turn the fuel cap counterclockwise.3.Place the fuel cap in the bracket attached to
the fuel filler flap.
Gasoline
For the best fuel efficiency, the gasoline should
be sulfur-free or very low in sulfur content.
Refuel only with unleaded gasoline without metj
allic additives.
Information on the recommended fuel grade can be found in the Owner's Manual.
Wheels
and
tires
Tire
inflation
pressure
specifications
The tire inflation pressure values can be found on the sign on the door pillar.
After
correcting
the
tire
inflation
pressure
Reinitialize the Flat Tire Monitor.
Reset the Tire Pressure Monitor.
Checking
the
tire
inflation
pressure Regularly check the tire inflation pressure and
correct it as needed:'xAt least twice a month.'xBefore embarking on an extended trip.
Electronic
oil
measurement
Requirements Depending on the previous displays, the status
display appears when the engine is running or afj
ter the vehicle has been driven for at least 30 mij nutes.
Displaying
the
engine
oil
level On the Control Display:
1."Vehicle info"2."Vehicle status"3."Engine oil level"
Different messages appear on the display dejpending on the engine oil level. Pay attention to
these messages.
Adding
engine
oil
General
information Switch off the ignition and safely park the vehicle
before engine oil is added.
Adding
Only add engine oil when the message is disj played in the instrument cluster.
Seite 30QUICK
REFERENCEYour
BMW
at
a
glance30
Online Edition for Part no. 01402988494 - II/18