BMW 6 SERIES COUPE 2017 Manual PDF

Page 71 of 269

NOTE
If the vehicle is stationary, Automatic
Hold engages the parking brake. It prevents
the vehicle from rolling in a vehicle wash.
There is a risk of property damage. Deactivate
Automatic Hold prior to entering the vehicle
wash.'

Page 72 of 269

Malfunction
In the event of a failure or malfunction of the parking brake, secure the vehicle against rolljing using a wheel chock, e.g., when leaving it.
Afterapowerfailure
Puttingtheparkingbrakeinto
operation1.Switch on the ignition.2. Press the switch while stepping on
the brake pedal or selector lever position P
is set.
It may take several seconds for the brake to be
put into operation. Any sounds associated with this are normal.
The indicator light in the instrument
cluster goes out as soon as the parking
brake is ready for operation.
Turnsignal,highbeams,
headlightflasher
Turnsignal
Turnsignalinexteriormirror When driving and during operation of the turn
signals or hazard warning system, do not fold in the exterior mirrors, so that the signal lightson the exterior mirror are easy to see.
Usingturnsignals
Press the lever beyond the resistance point.
The lever returns into its starting position after
actuation.
To switch off manually, slightly tap the lever to the resistance point.
Tripleturnsignalactivation
Lightly tap the lever up or down.
The turn signal flashes three times.
The function can be activated or deactivated.
Using iDrive:
1."Settings"2."Lighting"3."Triple turn signal"
The setting is stored for the driver profile curj
rently used.
Signalingbriefly Press the lever to the resistance point and hold
it there for as long as you want the turn signal to flash.
Malfunction
Unusually rapid flashing of the indicator lamp indicates that a turn signal bulb has failed.
Highbeams,headlightflasher
Push the lever forward or pull it backward.
Seite 72ControlsDriving72
Online Edition for Part no. 0140 2 915 411 - X/16

Page 73 of 269

'yHigh beams on, arrow 1.'yHigh beams off/headlight flasher, arrow 2.
Washer/wipersystemGeneralinformation
Do not use the wipers if the windshield is dry, as this may damage the wiper blades or causethem to become worn more quickly.
Safetyinformation WARNING
If the wipers start moving in the folded
away state, body parts can be jammed or damj age may occur to parts of the vehicle. There isa risk of injury or risk of property damage.Make sure that the vehicle is switched offwhen the wipers are in the folded away stateand the wipers are folded in when switchingon.'

Page 74 of 269

Intervalmodeorrainsensor
Concept
The rain sensor automatically controls the time between wipes depending on the intensity ofthe rainfall.
Generalinformation
The sensor is located on the windshield, dij
rectly in front of the interior mirror. Without the
rain sensor, the frequency of the wiper operaj
tion is preset.
Safetyinformation NOTE
If the rain sensor is activated, the wipers
can accidentally start moving in vehicle
washes. There is a risk of property damage. Deactivate the rain sensor in vehicle washes.'

Page 75 of 269

Cleaning
Pull the lever.
The system sprays washer fluid on the windj shield and activates the wipers briefly.
In addition, the headlights are cleaned at reguj lar intervals when the vehicle's lights are actijvated.
Windshieldwashernozzles
The windshield washer nozzles are automatij
cally heated while the ignition is switched on.
Fold-awaypositionofthewipers
Concept
The wipers can be folded away from the windj shield in the fold-away position.
Generalinformation
Important, e.g., when changing the wiper
blades or when folding out under frosty condij tions.
Safetyinformation WARNING
If the wipers start moving in the folded
away state, body parts can be jammed or damj
age may occur to parts of the vehicle. There is
a risk of injury or risk of property damage. Make sure that the vehicle is switched offwhen the wipers are in the folded away stateand the wipers are folded in when switchingon.'

Page 76 of 269

Washerfluid
Generalinformation All washer nozzles are supplied from one resjervoir.
Use a mixture of tap water and windshield washer concentrate. If desired, a windshield
washer concentrate containing antifreeze can
be used.
Recommended minimum fill quantity:
0.2 US gal/1 liter.
Safetyinformation WARNING
Some antifreeze agents can contain
harmful substances and are flammable. There
is a risk of fire and a risk of injury. Observe the instructions on the containers. Keep antifreeze
away from ignition sources. Do not refill operj
ating materials into different bottles. Store opj
erating materials out of reach of children.
United States: The washer fluid mixture ratio is regulated by the U.S. EPA and many individualstates; do not exceed the allowable washer
fluid dilution ratio limits that apply. Follow the
usage instructions on the washer fluid conj
tainer.
Use of BMWss Windshield Washer Concenj trate or the equivalent is recommended.'

Page 77 of 269

SafetyinformationWARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an acj
cident. Before exiting, secure the vehicle
against rolling.
In order to ensure that the vehicle is secured against rolling away, observe the following:'ySet the parking brake.'yOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'yOn uphill grades or on a downhill slope,
also secure the vehicle, e.g., with a wheel chock.'

Page 78 of 269

2.With the driver's safety belt fastened,
briefly push the selector lever in the dej sired direction, past a resistance point, if
needed. The selector lever automatically returns to the center position when rejleased.
EngagingselectorleverpositionP
Press button P.
KickdownKickdown is used to achieve maximum driving
performance.
Step on the accelerator pedal beyond the rej sistance point at the full throttle position.
SportprogramM/S
Concept
The shifting points and shifting times in the Sport program are designed for a sportier drivjing style. The transmission, for instance shifts
up later and the shifting times are shorter.
Activatingthesportprogram
Press the selector lever to the left out of selecj
tor lever position D.
The engaged gear is displayed in the instruj ment cluster, for instance S1.
The sport program of the transmission is actij
vated.
EndingtheSportprogram Push the selector lever to the right.
D is displayed in the instrument cluster.
ManualmodeM/S
Concept
Manual gear-shifting is possible in manual mode.
Activatingmanualmode
Press the selector lever to the left out of selecj
tor lever position D, arrow 1. Next, push the sej lector lever forward or pull it backward, arjrow 2.
Seite 78ControlsDriving78
Online Edition for Part no. 0140 2 915 411 - X/16

Page 79 of 269

Manual mode becomes active and the gear ischanged.
The engaged gear is displayed in the instruj ment cluster, for instance M1.
Shifting To shift down: press the selector lever forward.
To shift up: pull the selector lever rearwards.
The transmission continues shifting automatij cally in certain situations, for instance when
speed limits are reached.
SteptronicSporttransmission:
preventautomaticupshiftinginM/S
manualmode
The Steptronic Sport transmission does not
automatically upshift in M/S manual mode
once the maximum speed is reached, if one of
the following conditions is met:'yDSC deactivated.'yTRACTION activated.'ySPORT+ activated.
In addition, there is no downshifting for kickj
down.
Endingthemanualmode Push the selector lever to the right.
D is displayed in the instrument cluster.
Shiftpaddles
Concept
The shift paddles on the steering wheel allow you to shift gears quickly while keeping bothhands on the steering wheel.
Generalinformation Shifting
The vehicle only shifts at suitable engine and
road speeds.
Switchingintomanualmode
In selector lever position S, actuating a shift paddle switches into manual mode permaj
nently.
In selector lever position D, actuating a shift paddle switches into manual mode temporaj
rily.
Switchingintoautomaticmode
In selector lever position D, after conservative
driving in manual mode without acceleration or
shifting via the shift paddles for a certain
amount of time, the transmission switches
back to automatic mode.
Shifting'yTo shift up: briefly pull right shift paddle.'yTo shift down: briefly pull left shift paddle.
The selected gear is briefly displayed in the inj
strument cluster, followed by the current gear.
Displaysintheinstrumentcluster The selector lever position is disjplayed, for example P.
Electronicunlockingofthe
transmissionlock
Generalinformation
Electronically unlock the transmission lock to
maneuver vehicle from a danger area.
Seite 79DrivingControls79
Online Edition for Part no. 0140 2 915 411 - X/16

Page 80 of 269

Unlocking is possible, if the starter can spin the
engine.
Before unlocking the transmission lock, set the
parking brake to prevent the vehicle from rollj
ing away.
EngagingselectorleverpositionN1.Press and hold down brake pedal.2.Press the Start/Stop button. The starter
must audibly start.3.Press the button on the selector lever, arj
row 1, and press and hold the selector lever into selector lever position N, arjrow N, until selector lever position N is disjplayed in the instrument cluster.
A Check Control message is displayed.4.Release the selector lever.5.Release brake, as soon as the starter stops.6.Maneuver the vehicle from the danger areaand secure it against moving on its own.
For additional information, see the chapter ontow-starting and towing.
SteptronicSporttransmission:
LaunchControl
Concept
Launch Control enables optimum acceleration
on surfaces with good traction under dry surj rounding conditions.
Generalinformation
The use of Launch Control causes premature component wear since this function represents
a very heavy load for the vehicle.
Do not use Launch Control during the break-in,
refer to page 184, period.
To start with Launch Control do not steer the
steering wheel.
Functionalrequirements
Launch Control is available when the engine is
warmed up, that is, after uninterrupted driving of at least 6 miles/10 km.
StartwithlaunchcontrolWhile the engine is running:1. Press button or select Sport+ with
the Driving Dynamics Control.
TRACTION is displayed in the instrument
cluster and the indicator light for DSC OFF
lights up.2.Engage selector lever position S.3.With the left foot, forcefully press down on
the brake.4.Press and hold down the accelerator pedal
beyond the resistance point at the full
throttle position, kickdown.
A flag symbol is displayed in the instruj
ment cluster.5.The starting engine speed adjusts. Within
3 seconds, release the brake.
Repeateduseduringatrip
After Launch Control was used, the transmisj
sion must cool down for approx. 5 minutes, bej fore Launch Control can be used again.
Launch Control adjusts to the surroundingconditions, when used again.
Seite 80ControlsDriving80
Online Edition for Part no. 0140 2 915 411 - X/16

Page:   < prev 1-10 ... 31-40 41-50 51-60 61-70 71-80 81-90 91-100 101-110 111-120 ... 270 next >