BMW M4 2017 Owners Manual

Driving
tips
This chapter provides you with information useful in dealing with specific driving and operating modes.Online Edition for Part no. 01 40 2 974 597 - VI/16

BMW
M4
technologyVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable country provisions
must be observed.
High-performance
engine
General
information
With a displacement of 3 liters, the high-perj formance engine generates a maximum power
of 425 hp, with Competition Package 444 hp and a maximum torque of 406 lb ft/550 Nm.With its spontaneous response behavior, aspeed range of wide utility results. The maxijmum engine speed is 7,600 rpm and is elecj
tronically controlled. Because of the high enj gine dynamics, the maximum engine speed
with the vehicle stationary is reduced.
Warm-up
During the engine warm-up phase, the high-
performance engine has a somewhat rougher
running behavior because of the emission conj
trols.
When the engine is cold, the exhaust system has a slightly metallic undertone due to the naj
ture of the system.
For more information about the warm-up proj
cedure: Engine speed, refer to page 85, and
engine oil temperature, refer to page 85.Compound
brake
The high-performance braking system has
perforated compound brake discs.
Because of particular structural characteristics,
there may be operation-related noises during
braking. However, this has no effect on perj
formance, operational reliability and reliability
of the brake.
Correct
braking
To keep the brake system in optimum condij tion, it is expedient to apply them at regular injtervals corresponding to the vehicle character.
M
carbon
ceramic
brakeThe high-performance braking system has
perforated carbon ceramic brake discs.
Due to properties of the materials used, brakj ing may be associated with louder function
noises, particularly in wet conditions, just bej
fore the vehicle comes to a stop. However, this
has no effect on the performance, operational
reliability and durability of the brake.
The effects of moisture and road salt, from usj
ing a carwash or dew formation overnight, e.g.,
may render the braking effect comparable to
that of a conventional braking system. This
may be perceived as reduced braking effect
and can be compensated for, if needed, by pressing the brake pedal harder.
Before washing the vehicle in an automatic
carwash or wash tunnel, clean the brake discs and brake calipers with a steam jet or high-pressure washer as well, to prevent encrustajtions and dirt buildups, caused by salt crystals,e.g., if the vehicle is immobile afterwards. The
cleaning effect of automatic carwashes or wash tunnels is usually not adequate for this inthe area around the wheels.Seite 162Driving
tipsBMW
M4
technology162
Online Edition for Part no. 01 40 2 974 597 - VI/16

To do this, also follow the instructions inWashing the vehicle, refer to page 218, and
Braking safely, refer to page 166.
Drivetrain
With this vehicle, particular value was placed
on the direct connection from engine to the
drivetrain. Due to the torsionally rigid design of the drivetrain, as is typical in a sports car, the
transmission of the torque also gives acoustic
feedback.
When there are load changes, this may result
in clicking noises. The do not cause any imj
pairment of the operation or the service life of
the components.
Driving
on
racetracksHigher mechanical and thermal loads during
racetrack operation lead to increased wear.
This wear is not covered by the warranty. The
vehicle is not designed for motorsports comj
petitive use.
The standard brake linings and the wear indij cators are not designed for racetrack operaj tion.Seite 163BMW
M4
technologyDriving
tips163
Online Edition for Part no. 01 40 2 974 597 - VI/16

Things
to
remember
when
drivingVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable country provisions
must be observed.
Breaking-in
period
General
information Moving parts need time to adjust to one anj
other (break-in time).
The following instructions will help you to achj
ieve a long vehicle life and good efficiency.
During break-in, do not use the Launch Conj trol.
Safety
information WARNING
Due to new parts and components,
safety and driver assistance systems can react
with a delay. There is a risk of an accident. Afj
ter installing new parts or with a new vehicle,
drive conservatively and intervene early if necj
essary. Observe the break-in procedures of
the respective parts and components.'

tioned have to be renewed in the course of thevehicle's operating life.
General
driving
notes
Closing
the
trunk
lid WARNING
An open tailgate protrudes from the vehij
cle and can endanger occupants and other traffic participants or damage the vehicle in the
event of an accident, braking or evasive maj
neuvers. In addition, exhaust fumes may enter the vehicle interior. There is a risk of injury orrisk of property damage. Do not drive with the
tailgate open.'

Braking
safely
Your vehicle is equipped with ABS as a standj
ard feature.
Perform an emergency stop in situations that require such.
Steering is still responsive. You can still avoid any obstacles with a minimum of steering efj
fort.
The pulsing of the brake pedal indicates that ABS is in its active mode.
In certain braking situations, the perforated
brake discs can emit functional noises. Howj
ever, this has no effect on the performance and
operational reliability of the brake.
Objects
in
the
movement
area
around
pedals
and
floor
area
WARNING
Objects in the driver's floor area can limit
the pedal distance or block a depressed pedal.
There is a risk of an accident. Stow objects in
the vehicle such that they are secured and
cannot enter into the driver's floor area. Use
floor mats that are suitable for the vehicle and
can be safely attached to the floor. Do not use loose floor mats and do not layer several floormats. Make sure that there is sufficient clearjance for the pedals. Ensure that the floor mats
are securely fastened again after they were rej
moved, e.g., for cleaning.'

Condensation
water
under
the
parked
vehicle
When using the automatic climate control,
condensation water develops and collects unj
derneath the vehicle.
Ground
clearance NOTE
If ground clearance is insufficient, there
might be contact with the front or rear spoiler,
e.g., when driving over curbs or entering into
underground vehicle parking garages. There is
a risk of property damage. Ensure that there is
sufficient ground clearance available.'

LoadingVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable country provisions
must be observed.
Safety
information WARNING
High gross weight can overheat the tires,
damage them, and cause a sudden drop in tire
inflation pressure. There is a risk of an accij
dent. Pay attention to the permitted load caj pacity of the tires and never exceed the perjmitted gross weight.'

available cargo and luggage load capacity
calculated in Step 4.
Load
The maximum load is the sum of the weight of
the occupants and the cargo.
The greater the weight of the occupants, the less cargo that can be transported.
Stowing
and
securing
cargo
'yCover sharp edges and corners on the
cargo.'yHeavy cargo: stow as far forward as possij
ble, directly behind and at the bottom of
the rear passenger seat backrests.'yVery heavy cargo: when the rear seat is not occupied, secure each of the outer safetybelts in the opposite buckle.'yIf necessary, fold down the rear backreststo stow cargo.'yDo not stack cargo above the top edge of
the backrests.'ySmaller and lighter cargo: secure with ratchet straps, the floor net, or draw straps.'yLarger and heavy cargo: secure with cargo
straps.Lashing
eyes
in
the
cargo
area
There are four lashing eyes in the cargo area for securing cargo.
Attach load securing aids, such as lashing straps, retaining straps, draw straps or cargonets, to the lashing eyes in the cargo area.
Floor
net To secure the cargo the floor net can also beused.
Hook the floor net into the fittings in the cargoarea floor.
Roof-mounted
luggage
rack General
information
Roof racks are available as special accessories.
Seite 169LoadingDriving
tips169
Online Edition for Part no. 01 40 2 974 597 - VI/16

Safety
informationWARNING
When driving with roof load, e.g., with
roof-mounted luggage rack, driving safety may
not be ensured in driving-critical situations due to the elevated center of gravity. There is a risk
of accidents or risk of property damage. Do not
deactivate Dynamic Stability Control DSC
when driving with roof load.'