BMW X1 2018 User Guide

water. For more information go to
www.P65Warnings.ca.gov/passenger-vehicle.
WARNING
Operating, servicing and maintaining a passenj
ger vehicle or off-highway motor vehicle can expose you to chemicals including engine exj
haust, carbon monoxide, phthalates, and lead, which are known to the State of California to
cause cancer and birth defects or other reproj ductive harm. To minimize exposure, avoid
breathing exhaust, do not idle the engine exj cept as necessary, service your vehicle in a
well-ventilated area and wear gloves or wash
your hands frequently when servicing your vej
hicle. For more information go to
www.P65Warnings.ca.gov/passenger-vehicle.
Service
and
warranty
We recommend that you read this publication thoroughly. Your vehicle is covered by the followjing warranties:
'xNew Vehicle Limited Warranty.'xRust Perforation Limited Warranty.'xFederal Emissions System Defect Warranty.'xFederal Emissions Performance Warranty.'xCalifornia Emission Control System LimitedWarranty.
Detailed information about these warranties islisted in the Service and Warranty Information
Booklet for US models or in the Warranty and
Service Guide Booklet for Canadian models.
Your vehicle has been specifically adapted and
designed to meet the particular operating condij
tions and homologation requirements in your
country and continental region in order to deliver
the full driving pleasure while the vehicle is operj ated under those conditions. If you wish to operj
ate your vehicle in another country or region, you
may be required to adapt your vehicle to meet
different prevailing operating conditions and hoj
mologation requirements. You should also be
aware of any applicable warranty limitations or
exclusions for such country or region. In such
case, please contact Customer Relations for furj
ther information.
Maintenance Maintain the vehicle regularly to sustain the road
safety, operational reliability and the New Vehicle Limited Warranty.
Specifications for required maintenance measj ures:'xBMW Maintenance system.'xService and Warranty Information Booklet for
US models.'xWarranty and Service Guide Booklet for
Canadian models.
If the vehicle is not maintained according to these specifications, this could result in seriousdamage to the vehicle. Such damage is not covjered by the BMW New Vehicle Limited Warranty.
Data
memory
General
information Electronic control devices are installed in the vej
hicle. Some of these are necessary for the vehij cle to function safely or provide assistance durjing driving, for instance driver assistancesystems. Furthermore, control devices facilitatecomfort or infotainment functions.
Electronic control devices contain data memoj
ries, which are able to temporarily or permanently
store information about the condition of the vehij cle, component load, maintenance requirements,
technical events or faults.
This information generally records the state of a component, a module, a system or the environj
ment, for instance:
'xOperating states of system components, e.g., fill levels, tire inflation pressure, batterystatus.Seite 11*nformationNOTES11
Online Edition for Part no. 01402120596 - II/18

'xStatus messages for the vehicle and its indij
vidual components, e.g., wheel rotational
speed, wheel speed, deceleration, transverse
acceleration, engaged safety belt indicator.'xMalfunctions and faults in important system components, for instance lights and brakes.'xInformation on vehicle-damaging events.'xResponses by the vehicle to special situaj
tions such as airbag deployment or engagej ment of the stability control systems.'xAmbient conditions, e.g., temperature, rainsensor signals.
The data is required to perform the control dejvice functions. Furthermore, it also serves to recj
ognize and correct malfunctions, and helps the
vehicle manufacturer to optimize vehicle funcj
tions. The majority of this data is transient and is
only processed within the vehicle itself. Only a
small proportion of the data is stored in event or fault memories and, if needed, in the vehicle key.
Reading
out
data
When servicing, for instance during repairs, servj
ice processes, warranty cases, and quality assurj ance measures, this technical information can beread out from the vehicle together with the vehijcle identification number. A dealerss service cenjter or another qualified service center or repairshop can read out the information. The socketfor OBD Onboard Diagnosis required by law inthe vehicle is used to read out the data. The data
is collected, processed, and used by the relevant organizations in the service network. The data
documents the technical conditions of the vehij
cle, helps in locating faults and improving quality,
and is transferred to the vehicle manufacturer, if
needed.
Furthermore, the manufacturer has product
monitoring duties to meet in line with product liaj
bility law. To fulfill these duties, the vehicle manj
ufacturer needs technical data from the vehicle. Fault and event memories in the vehicle can be
reset when a dealerss service center or another
qualified service center or repair shop performs
repair or servicing work.
Data on the scope of servicing work performed
and maintenance records are stored in the vehij
cle by means of the service history and transferj red to the vehicle manufacturer. The vehicleowner can contact a dealer's service center toobject to the data being stored and transferred tothe vehicle manufacturer. This objection appliesfor as long as the vehicle owner remains the projprietor of the vehicle.
Data
entry
and
data
transfer
into
the
vehicle
General
information Depending on the vehicle equipment, some data
can be transferred into the vehicle when using comfort and infotainment functions, for instance:'xMultimedia data such as music or movies forplayback in an integrated multimedia system.'xAddress book data for use in conjunction withan integrated hands-free system or anintegrated navigation system.'xEntered navigation destinations.'xData on the use of Internet services.
This data can be stored locally in the vehicle or isfound on a device that has been connected to
the vehicle, e.g., a smartphone, USB stick or
MP3 player. If this data is stored in the vehicle, it can be deleted at any time. This data is only
transmitted to third parties if expressly desired.
This depends on the personal settings selected for using online services.
Depending on the vehicle equipment, the followj
ing comfort and individual settings can be stored
in the vehicle and modified at any time, for inj
stance:
'xSettings for the seat and steering wheel posij
tions.'xSuspension and climate control settings.'xIndividual settings, for instance lighting in the
car's interior.Seite 12NOTES*nformation12
Online Edition for Part no. 01402120596 - II/18

Control
via
mobile
devices
Depending on the vehicle equipment, mobile dej
vices connected to the vehicle, for instance smartphones, can be controlled via the vehiclecontrol elements. The sound and picture from
the mobile device can be played back and disj played through the multimedia system. Certain
information is transferred to the mobile device at
the same time. Depending on the type of conj
nection, this includes, for instance position data
and other general vehicle information. This optij
mizes the way in which selected apps, for inj
stance navigation or music playback, work.
There is no further interaction between the moj
bile device and the vehicle, for instance active access to vehicle data. How the data will be
processed further is determined by the provider
of the particular app being used. The extent of the possible settings depends on the respective
app and the operating system of the mobile dej vice.
Services
General
information If the vehicle has a wireless network connection,
this enables data to be exchanged between the vehicle and other systems. The wireless network
connection is realized via an in-vehicle transmitj
ter and receiver unit or via personal mobile devij ces brought into the vehicle, for instance smartj
phones. This wireless network connection enables 'online functions' to be used. These inj
clude online services and apps supplied by the vehicle manufacturer or by other providers.
Services
from
the
vehicle
manufacturer
Where online services from the vehicle manufacj
turer are concerned, the corresponding functions are described in the appropriate place, for inj
stance the Owner's Manual or manufacturer's
website. The relevant legal information pertaining to data protection is provided there too. Personaldata may be used to perform online services.Data is exchanged over a secure connection,
for instance with the IT systems of the vehicle
manufacturer intended for this purpose. Any colj
lection, processing, and use of personal data above and beyond that needed to provide theservices must always be based on a legal perj
mission, contractual arrangement or consent.
In addition, the vehicle manufacturer evaluates
anonymized information on transport infrastrucj
ture and how the infotainment system is used. This information cannot be traced back to indij
vidual vehicles or people. Evaluating the data enj
ables the manufacturer to further improve its
products or services, for instance by incorporatj
ing the most up-to-date traffic bulletins. The data
transfer feature can be deactivated in the vehicle. Certain services and functions, some of whichare subject to a charge, can be deactivated by
the driver. It is also possible to activate or deactij
vate the data connection as a whole. That is, with
the exception of functions and services required
by law such as Assist systems.
Services
from
other
providers When using online services from other providers,these services are the responsibility of the relej
vant provider and subject to their data privacy conditions and terms of use. The vehicle manuj
facturer has no influence on the content exj
changed during this process. Information on the
way in which personal data is collected and used
in relation to services from third parties, the scope of such data, and its purpose, can be obj
tained from the relevant service provider.
Event
Data
Recorder
EDR
This vehicle is equipped with an event data rej
corder EDR. The main purpose of an EDR is to record, in certain crash or near crash-like situaj
tions, such as an air bag deployment or hitting a
road obstacle, data that will assist in understandj ing how a vehicless systems performed. The
EDR is designed to record data related to vehicle
Seite 13*nformationNOTES13
Online Edition for Part no. 01402120596 - II/18

dynamics and safety systems for a short period
of time, typically 30 seconds or less.
The EDR in this vehicle is designed to record such data as:'xHow various systems in your vehicle were opj
erating.'xWhether or not the driver and passenger safety belts were fastened.'xHow far, if at all, the driver was depressing theaccelerator and/or brake pedal.'xHow fast the vehicle was traveling.
This data can help provide a better understandjing of the circumstances in which crashes andinjuries occur.
EDR data is recorded by your vehicle only if a
nontrivial crash situation occurs; no data is rej corded by the EDR under normal driving condij
tions and no personal data, for instance name,
gender, age, and crash location, are recorded.
However, other parties, such as law enforcej ment, could combine the EDR data with the type
of personally identifying data routinely acquired
during a crash investigation.
To read data recorded by an EDR, special equipj ment is required, and access to the vehicle or theEDR is needed. In addition to the vehicle manujfacturer, other parties, such as law enforcement,that have the special equipment, can read the injformation if they have access to the vehicle orthe EDR.
Vehicle
identification
number
The vehicle identification number can be foundin the engine compartment, on the right-hand
side of the vehicle.
The vehicle identification number can be found
on the type label, on the right-hand side of the vehicle.
The vehicle identification number can also befound behind the windshield.
It is also possible to display the vehicle identificaj
tion number via iDrive, refer to page 57.
Seite 14NOTES*nformation14
Online Edition for Part no. 01402120596 - II/18

Reporting
safety
defects
For
US
customers
The following only applies to vehicles owned and
operated in the US.
If you believe that your vehicle has a defect
which could cause a crash or could cause injury
or death, you should immediately inform the Naj tional Highway Traffic Safety AdministrationNHTSA, in addition to notifying BMW of North
America, LLC, P.O. Box 1227, Westwood, New
Jersey 07675-1227, Telephone
1-800-831-1117.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safetydefect exists in a group of vehicles, it may order arecall and remedy campaign.
However, NHTSA cannot become involved in inj
dividual problems between you, your dealer, or BMW of North America, LLC.
To contact NHTSA, you may call the Vehicle
Safety Hotline toll-free at 1-888-327-4236 (TTY:
1-800-424-9153); go to http://www.safercar.gov;
or write to: Administrator, NHTSA, 400 Seventh
Street, SW., Washington, DC 20590. You can
also obtain other information about motor vehicle
safety from http://www.safercar.gov.
For
Canadian
customers Canadian customers who wish to report a safety-
related defect to Transport Canada, Defect Inj vestigations and Recalls, may call the toll-freehotline 1-800-333-0510. You can also obtainother information about motor vehicle safety
from http://www.tc.gc.ca/roadsafety.
Seite 15*nformationNOTES15
Online Edition for Part no. 01402120596 - II/18

16
Online Edition for Part no. 01402120596 - II/18

QUICK
REFERENCE
Your
BMW
at
a
glance

1817
Online Edition for Part no. 01402120596 - II/18

Your
BMW
at
a
glanceOpening
and
closing
Buttons
on
the
remote
control
1Unlocking2Locking3Unlocking the tailgate
With automatic tailgate operation: open the
tailgate4Panic mode
Unlocking
the
vehicle
Press button on the remote control.
Depending on the settings, either only the drivj
er's door or all vehicle access points are unj
locked.
If only the driver's door is unlocked, press the button of the remote control again to unlock the other vehicle access points.
Press and hold this button on the rejmote control after unlocking.
The windows and the glass sunroof are opened, as long as the button on the remote control is
pressed.
Locking
the
vehicle Press button on the remote control.
All vehicle access points are locked.
Buttons
for
the
central
locking
system
Overview
Buttons for the central locking system.
Locking Press the button with the front doorsclosed.
The fuel filler flap remains unlocked.
Unlocking Press button.
Panic
mode
You can trigger the alarm system if you find yourj
self in a dangerous situation.
Press button on the remote control forat least 3 seconds.
To switch off the alarm: press any button.
Seite 18QUICK
REFERENCEYour
BMW
at
a
glance18
Online Edition for Part no. 01402120596 - II/18

Comfort
AccessConcept
The vehicle can be accessed without activating
the remote control.
All you need to do is to have the remote control with you, such as in your pants pocket.
The vehicle automatically detects the remote
control when it is in close proximity or in the car's interior.
Unlocking
the
vehicle
Grasp the door handle on the driver's or front passenger door completely.
Locking
the
vehicle
Touch the surface on the door handle of the drivj
er's or front passenger door with your finger for
approx. 1 second without grasping the door hanj dle.
With
automatic
tailgate
operation:
opening
and
closing
the
tailgate
with
no-touch
activation
Concept
The tailgate can be opened and closed with no-
touch activation using the remote control you are carrying.
Performing
the
foot
movement1.Stand in the middle behind the vehicle at apj prox. one arm's length away from the rear of
the vehicle.2.Wave a foot under the vehicle in the direction
of travel and immediately pull it back. With
this movement, the leg must pass through
the ranges of both sensors.
Tailgate
Opening
'xUnlock the vehicle and press the button onthe tailgate.'xIf carrying the remote control, press the butjton on the tailgate.Seite 19Your
BMW
at
a
glanceQUICK
REFERENCE19
Online Edition for Part no. 01402120596 - II/18

'xPress button on the remote control
for approx. 1 second.
Depending on the setting, the doors may also be unlocked.
Closing
'xPress button, arrow 1, on the inside of thetailgate.'xPress button, arrow 2.
The vehicle will be locked after closing the tailgate. The driver's door must be closed for
this purpose and the remote control must be outside of the vehicle in the area of the tailjgate.
Seats,
mirrors,
and
steering
wheel
Electrically
adjustable
seats
1Memory function2Backrest width3Lumbar support4Backrest tilt5Forward/backward, height, seat tilt
Adjusting
the
head
restraint
Height
'xTo raise: push the head restraint up.'xTo lower: press button, arrow 1, and push head restraint down.
Adjusting
the
exterior
mirrors
1Settings2Selecting a mirror, Automatic Curb Monitor3Folding in and outSeite 20QUICK
REFERENCEYour
BMW
at
a
glance20
Online Edition for Part no. 01402120596 - II/18