BMW X1 2018 Owner's Manual

Adjusting
the
steering
wheel
Manual
steering
wheel
adjustment1.Fold the lever down.2.Adjust the height and reach of the steering wheel.3.Fold the lever back up.
Memory
function
Concept
The following settings can be stored and, if necj
essary, retrieved using the memory function:
'xSeat position.'xExterior mirror position.'xHeight of the Head-up Display.
Storing
1.Switch on the ignition.2.Set the desired position.3. Press button. The LED in the button
lights up.4.Press selected button 1 or 2 while the LED is
lit. The LED goes out.
Calling
up
settings
The stored position is called up automatically.
Press selected button 1 or 2.
The procedure stops when a switch for setting
the seat or one of the memory buttons is
pressed.
While driving, the seat position adjustment on the driver's side is interrupted after a short time.
Displays
and
control elements
In
the
vicinity
of
the
steering
wheel
1Light switch element2High beams, headlight flasher, turn signal3Instrument cluster4Washer/wiper system5Start/Stop button
Indicator/warning
lights
Instrument
clusterThe indicator/warning lights can light up in a varijety of combinations and colors.
Several of the lights are checked for proper funcj tioning and light up temporarily when the engine
is started or the ignition is switched on.
Seite 21Your
BMW
at
a
glanceQUICK
REFERENCE21
Online Edition for Part no. 01402120596 - II/18

Driver's
door1Safety switch2Power windows3Exterior mirrors4Opening/closing the tailgate
Switch
console
1Selector lever2Controller3Parking brake4Driver assistance systems5Driving Dynamics Control
iDrive
Concept The iDrive combines the functions of manyswitches. These functions can be operated via
the Controller and, depending on the equipment version, the touchscreen.
Controller
General
information
The buttons can be used to open the menus dij
rectly. The Controller can be used to select
menu items and enter the settings.
Buttons
on
the
ControllerButtonFunctionPress once: call up main menu.
Press twice: display all menu items of the main menu.Open the Communication menu.Open the Media/Radio menu.Open destination input menu for navij
gation.Open navigation map.Press once: open the previous disj
play.
Press and hold: open the menus used
last.Open the Options menu.
Voice
activation
Using
the
voice
activation
system
Activating
the
voice
activation
system
1. Press button on the steering wheel.2.Wait for the signal.3.Say the command.
This symbol in the instrument cluster indij
cates that the voice activation system is active.
If no other commands are possible, operate the
function via iDrive.
Seite 22QUICK
REFERENCEYour
BMW
at
a
glance22
Online Edition for Part no. 01402120596 - II/18

Terminating
the
voice
activation
systemPress the button on the steering wheel
or 

To prevent the vehicle from creeping after you
select a drive mode or reverse, maintain pressure on the brake pedal until you are ready to start.
Selector
lever
lock
A lock prevents an inadvertent change from sej
lector lever position P to another selector lever position and, depending on the transmission verj
sion, inadvertent switching to selector lever posij tion P or R.
To release the lock: with the brake pedal dej pressed, press the button on the front or side ofthe selector lever.
Steptronic
transmission,
Sport
and
manual
mode
Sport program:
Press the selector lever to the left out of selector lever position D.
Manual mode:
'xTo shift down: press the selector lever forj ward.'xTo shift up: pull the selector lever rearwards.High
beams,
headlight
flasher,
turn
signal,
roadside
parking
light
High
beams,
headlight
flasher
Push the lever forward or pull it backward.
'xHigh beams, arrow 1.'xHeadlight flasher, arrow 2.
Turn
signal
'xOn: press the lever past the resistance point.'xOff: press the lever past the resistance point in the opposite direction.'xOff: lightly tap the lever to the resistancepoint.'xTriple turn signal activation: lightly tap the
lever up or down.'xBrief signaling: press the lever to the resistj ance point and hold it there for as long as you
want the turn signal to flash.Seite 24QUICK
REFERENCEYour
BMW
at
a
glance24
Online Edition for Part no. 01402120596 - II/18

Canada:
roadside
parking
light
Illuminate the vehicle on one side.
'xOn: with the ignition switched off, press thelever either up or down past the resistancepoint for approx. 2 seconds.'xOff: briefly press the lever to the resistance
point in the opposite direction.
Lights
and
lighting
Light
functions
SymbolFunctionFront fog lights.Automatic headlight control.
Cornering light.Lights off.
Daytime running lights.Parking lights.Low beams.Instrument lighting.Washer/wiper
system
Switching
the
wipers
on/off
and
brief
wipe
Switching
on
Press the lever up until the desired position isreached.
'xResting position of the wipers: position 0.'xRain sensor: position 1.'xNormal wiper speed: position 2.'xFast wiper speed: position 3.
Brief
wipe
and
switching
off
Press the lever down.
'xSwitching off: press the lever down until itreaches its standard position.'xBrief wipe: press the lever down from the
standard position.Seite 25Your
BMW
at
a
glanceQUICK
REFERENCE25
Online Edition for Part no. 01402120596 - II/18

Rain
sensorActivating/deactivating
To activate: press the lever up once from its
standard position, arrow 1.
To deactivate: press the lever back into the
standard position.
Adjusting the sensitivity:
Turn the thumbwheel on the wiper lever.
Cleaning
the
windshield
and
headlights
Pull the lever.
Rear
window
wiper
Switching
on
the
rear
window
wiper
Turn the outer switch upward.
'xResting position of the wiper, position 0.'xIntermittent mode, arrow 1. When reverse gear is engaged, the system switches to conjtinuous operation.
Clean
the
rear
window
Turn the outer switch in the desired direction.
'xIn resting position: turn the switch downward,
arrow 3. The switch automatically returns to its resting position when released.'xIn intermittent mode: turn the switch further,
arrow 2. The switch automatically returns to its intermittent position when released.Seite 26QUICK
REFERENCEYour
BMW
at
a
glance26
Online Edition for Part no. 01402120596 - II/18

Canada:
wiper
systemWiper
system
Switching
the
wipers
on/off
and
brief
wipe
Switching
on'xNormal wiper speed: tap up once.'xFast wiper speed: tap up twice or tap once
beyond the resistance point.
Brief
wipe
and
switching
off
Push wiper lever down.
'xBrief wipe: press down once.'xTo switch off normal wipe: press down once.'xTo switch off fast wipe: press down twice.Rain
sensor
Activating/deactivating
Press button on the wiper lever.
Adjusting
the
sensitivity
Turn the thumbwheel on the wiper lever.
Cleaning
the
windshield
and
headlights
Pull the wiper lever towards you.
Seite 27Your
BMW
at
a
glanceQUICK
REFERENCE27
Online Edition for Part no. 01402120596 - II/18

Rear
window
wiper
Switching
on
the
rear
window
wiper
Turn the outer switch upward.
'xResting position of the wiper, position 0.'xIntermittent mode, arrow 1. When reverse gear is engaged, the system switches to conjtinuous operation.
Clean
the
rear
window
Turn the outer switch in the desired direction.
'xIn resting position: turn the switch downward,
arrow 3. The switch automatically returns to its resting position when released.'xIn intermittent mode: turn the switch further,
arrow 2. The switch automatically returns to its intermittent position when released.
Climate
control
Air
conditioner
ButtonFunctionTemperature.Air conditioning.Recirculated-air modeButtonFunctionAir flow, manual.Air distribution, manual.Rear window defroster.Seat heating.
Automatic
climate
control
ButtonFunctionTemperature.Air conditioning.Maximum cooling.AUTO program.Recirculated-air mode/AUC.Air flow, manual.Air distribution, manual.SYNC program.Defrost and defog window.Rear window defroster.Seite 28QUICK
REFERENCEYour
BMW
at
a
glance28
Online Edition for Part no. 01402120596 - II/18

ButtonFunctionSeat heating.Switch off the system.
Infotainment
Radio
Control
elements
1Waveband/satellite radio2Changing the entertainment source3Sound output on/off, volume4Depending on the vehicle equipment: ejectj ing a CD/DVD5Depending on the vehicle equipment:
CD/DVD drive6Change station/track7Programmable memory buttons
Navigation
destination
entry
Entering
a
destination
via
address
State/province
1."Navigation"2. "Enter address"3."State/Province "4.Move the Controller to the right to select the
state from the list.
Entering
the
address
The address can be entered in any order. Example: entering the address via the town/city
1."City/Postal code "2.Enter the town/city.
The list is narrowed down further with each entry.3. Select the symbol.4.Select a town/city from the list.5.If necessary, enter the street.6.Select the street as you would the town/city.7.If necessary, enter a house number.8. Select the symbol.9.Select a house number or range of house
numbers from the list.
Starting
destination
guidance
"Start guidance"
If only the town/city was entered: destination guidance is started to the town/city center.
Connecting
a
mobile
phone
After the mobile phone is connected once to the
vehicle, the mobile phone can be operated using iDrive, the steering wheel buttons and spoken inj
structions.
1."My Vehicle"2."iDrive settings"3."Mobile devices"4."Connect new device"5.Select the functions for which the mobile phone is to be used.
The Bluetooth name of the vehicle is disj
played on the Control Display.Seite 29Your
BMW
at
a
glanceQUICK
REFERENCE29
Online Edition for Part no. 01402120596 - II/18

6.To perform additional steps on the mobile
phone, refer to the mobile phone owner's manual: e.g., search for or connect the Bluej
tooth device or a new device.
The Bluetooth name of the vehicle appears
on the mobile phone display. Select the Bluej tooth name of the vehicle.7.Depending on the mobile device, a control
number is displayed or the control number must be entered.'xCompare the control number displayed
on the Control Display with the control number on the display of the device.
Confirm the control number on the device
and on the Control Display.'xEnter and confirm the same control numj ber on the device and via iDrive.
The device is connected and displayed in the
device list.
The mobile phone is connected and will appear
at the top of the list of mobile phones.
Using
the
phone
Accepting
a
call Incoming call can be accepted via iDrive or the
button on the steering wheel.
Via
iDrive
"Accept"
Via
the
button
on
the
steering
wheel Press button.
Dialing
a
number
1."Communication"2."Dial number"3.Enter the numbers.4. Select the symbol. The connection is esj
tablished via the mobile phone to which this
function has been assigned.If connection is to be set up via the additional phone:1. Press button.2."Call via"
Apple
CarPlay
preparation
Concept
CarPlay allows certain functions of a compatible
Apple iPhone to be used via Siri voice operation
and iDrive.
Functional
requirements
'xCompatible iPhone.
iPhone 5 or later with iOS 7.1 or later.'xCorresponding mobile wireless contract.'xBluetooth, WiFi, and Siri voice operation are
switched on on the iPhone.
Switching
on
Bluetooth
and
CarPlay
Via iDrive:
1."My Vehicle"2."iDrive settings"3."Mobile devices"4."Settings"5.Select the following settings:'x"Bluetoothn"'x"Apple CarPlay"
Pairing
iPhone
with
CarPlay
Pair iPhone via Bluetooth with the vehicle.
Select CarPlay as the function:
"Apple CarPlay"
The iPhone is connected to the vehicle and disj played in the device list.
Seite 30QUICK
REFERENCEYour
BMW
at
a
glance30
Online Edition for Part no. 01402120596 - II/18