BMW X2 2023 Owners Manual

Warning
The set speed can be incorrectly adjusted or
called up by mistake. There is a risk of acci

The indicator lights in the instrument clusterlight up and the mark in the speedometer is set
to the current speed.
Cruise control is active and maintains the set
speed.
If necessary, the Dynamic Stability Control will be turned on.
Turning off
To switch off the system while standing, step on brake pedal at the same time.
Press the button on the steering
wheel.
The displays turn off. The stored set speed is
deleted.
Interrupting manually Press the button on the steering
wheel.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically The system is automatically interrupted in thefollowing situations:

Press and hold this button.
The indicator light in the instrument cluster lights up.
To switch distance control back on, press but

is being pressed; a vehicle was detected.
Displays in the Head

cle driving ahead will not be detected or will be
detected very late.
When you approach a curve the system may
briefly report vehicles in the next lane due to
the bend of the curve. If the system deceler

Safety information
Warning
The system cannot serve as a substitute for the driver

Interrupting automaticallyThe system is automatically interrupted in the
following situations:

In the following cases, the stored speed valueis deleted and cannot be called up again:

Check surrounding traffic and vehicle