BMW X3 2018 Owners Manual

To prevent window fogging, recirculated-air
mode switches off automatically after a certain amount of time, depending on the environj
mental conditions.
With constant recirculated-air mode, the air
quality in the car's interior deteriorates and the
fogging of the windows increases.
If there is window condensation, switch off rej
circulated-air mode or defog the windows, rej
fer to page 211.
Controlling
the
air
flow
manually
Concept
The air flow for climate control can be adjusted
manually.
Operation Press the left or right side of the butj
ton: decrease or increase air flow.
The intensity is indicated by LEDs. The highj
est level is active when seven LEDs are lit.
The air flow of the automatic climate control
may be reduced automatically to save battery
power.
Controlling
the
air
distribution manually
Concept
The air distribution for climate control can be
adjusted manually.
Operation Turn the wheel to select the dej
sired program or the desired inj
termediate setting.'y Windows.'y Upper body region.'y Windows, upper body region, and floor
area.'y Floor area.
Defrosting
windows
and
removing
condensation
Concept
Ice and condensation are quickly removed from the windshield and the front side winj
dows.
Settings
Make the following settings to defrost the winj
dows and remove condensation:
'yDirect the air distribution onto the winj
dows.'yIncreasing the air flow.'yIncrease the temperature.'ySwitch on the air conditioning if needed.
Rear
window
defroster
Press button. The LED lights up.The function is available with the enj
gine running.
The rear window defroster switches off autoj matically after a certain period of time.
Microfilter/activated-charcoal
filter
The microfilter removes dust and pollen from
the incoming air.
The activated-charcoal filter removes gaseous pollutants from the outside air that enters the
vehicle.
Have this combined filter changed during vehij
cle maintenance, refer to page 305.
Seite 211Climate
controlControls211
Online Edition for Part no. 01402984955 - X/17

Automatic
climate
control
with
enhanced
features
Overview
Buttons
in
the
vehicle
Climate
control
functions
ButtonFunctionTemperature, refer to
page 212.Climate control operation, refer
to page 213.Maximum cooling, refer to
page 213.AUTO program, refer to
page 213.Recirculated-air mode, refer to
page 214.Air flow, manual, refer to
page 214.Air distribution, manual, refer
to page 214.SYNC program, refer to
page 215.Defrost and defog window, rej
fer to page 215.ButtonFunctionRear window defroster, refer to
page 215.Active seat ventilation, refer to
page 92.Seat heating, refer to page 91.Open the Climate menu.
Switching
on/off
Switching
on Press any button except for the following:
'yRear window defroster.'yLeft side of air flow button.'ySYNC program.'ySeat heating.'ySeat ventilation.
Switching
off
Press and hold the left button until the
system switches off.
Temperature
Concept
The automatic climate control achieves the set
temperature as quickly as possible, if needed,
by using the maximum cooling or heating caj
pacity, and then keeps it constant.
Settings Turn the ring to set the desired
temperature.
Do not rapidly switch between different temperature settings.
Otherwise, the automatic clij
mate control will not have sufficient time to adj
just the set temperature.
Seite 212ControlsClimate
control212
Online Edition for Part no. 01402984955 - X/17

Air
conditioning
Concept
The air in the car's interior will be cooled and dehumidified and, depending on the temperaj
ture setting, warmed again.
The car's interior can only be cooled with the
drive-ready state switched on.
Switching
on/off Press button.
The LED is illuminated with air condij
tioning switched on.
Air conditioning is switched on with the engine running.
Depending on the weather, the windshield and
side windows may fog up briefly when drive-
ready state is switched on.
The air conditioning is switched on automatij
cally with the AUTO program.
When using the automatic climate control,
condensation water develops and collects unj
derneath the vehicle.
Maximum
cooling
Concept
The system is set to the lowest temperature,
optimum air flow and recirculated-air mode with the drive-ready state switched on.
General
information The function is available with external temperj
atures above approx. 32 

air. The outside air supply is shut off and theinterior air is recirculated.
General
information
If the system is activated, a sensor detects polj lutants in the outside air and controls the shut-
off automatically.
If the system is deactivated, outside air continj
uously flows into the car's interior.
With constant recirculated-air mode, the air
quality in the car's interior deteriorates and the
fogging of the windows increases.
Switching
on/off Press button.
The LED lights up if the system is
switched on using the button.
Via iDrive:1."My Vehicle"2."Vehicle settings"3."Climate functions"4.If necessary, "Air quality"5."Automatic air recirculation"
If there is window condensation, switch off rej
circulated-air mode or defog the windows, rej
fer to page 215.
Recirculated-air
mode
Concept
You may react to unpleasant odors or polluj
tants in the immediate environment by tempoj rarily suspending the supply of outside air. Thesystem then recirculates the air flow within thevehicle.
Operation Press button repeatedly to select an
operating mode:
'yLED off: outside air flows in continuously.'yLED on: the supply of outside air is permaj nently shut off.
With constant recirculated-air mode, the air
quality in the car's interior deteriorates and the
fogging of the windows increases.
If there is window condensation, switch off rej
circulated-air mode or defog the windows, rej
fer to page 215.
Controlling
the
air
flow
manually
Concept
The air flow for climate control can be adjusted
manually.
General
information To manually adjust air flow switch off AUTOprogram first.
Operation Press the left or right side of the butj
ton: decrease or increase air flow.
The selected air flow is shown on the display of
the automatic climate control.
The air flow of the automatic climate control
may be reduced automatically to save battery
power.
Controlling
the
air
distribution
manually
Concept
The air distribution for climate control can be
adjusted manually.
Operation Press button repeatedly to select a
program:
'yWindows, upper body region, and floor
area.'yUpper body region and floor area.Seite 214ControlsClimate
control214
Online Edition for Part no. 01402984955 - X/17

'yFloor area.'yWindows and floor area.'yWindows: driver's side only.'yWindows and upper body.'yUpper body region.
The selected air distribution is shown on the
display of the automatic climate control.
If there is window condensation, defog the windows, refer to page 215.
SYNC
program
Concept
The following settings of the driver's side can be transferred to the front-passenger side and
the rear:
'yTemperature.'yAir distribution.
Switching
on/off
Press button.
The LED is illuminated with the SYNC
program switched on.
The program is switched off automatically if
the settings on the front passenger side or in the rear are changed.
Defrosting
windows
and
removingcondensation
Concept
Ice and condensation are quickly removed from the windshield and the front side winj
dows.
Switching
on/off Press button.
The LED is illuminated with the sysj
tem switched on.
Point the side vents towards the side windows,
as needed. The air flow can be adjusted manj
ually with the system switched on.
If there is window condensation, press
the button or switch on the air condij
tioning to utilize the condensation sensor. Make sure that air can flow to the windshield.
If there is window condensation, press the butj
ton on the driver's side or switch on air condij
tioning to utilize the condensation sensor. Make sure that air can flow to the windshield.
Rear
window
defroster Press button. The LED lights up.The function is available with the enj
gine running.
The rear window defroster switches off autoj matically after a certain period of time.
Microfilter/activated-charcoal
filter
The microfilter removes dust and pollen from
the incoming air.
The activated-charcoal filter removes gaseous pollutants from the outside air that enters the
vehicle.
Have this combined filter changed during vehij
cle maintenance, refer to page 305.
Ventilation
Concept
The air flow directions can be individually adj
justed.
Adjusting
the
ventilation
General
information The air flow directions can be adjusted for dij
rect or indirect ventilation.Seite 215Climate
controlControls215
Online Edition for Part no. 01402984955 - X/17

Direct
ventilationThe air flow is directed towards the passenj
gers. The air flow heats or cools noticeably, depending on the adjusted temperature.
Indirect
ventilationThe air flow is not directed towards the pasj
sengers. The car's interior is warmed or cooled
indirectly, depending on the set temperature.
Front
ventilation
Overview'yLever for changing the air flow direction,
arrow 1.'yThumbwheel for variable opening and
closing of the vents, arrow 2.
Setting
the
temperature
The temperature of the ventilation in the upper
body area can be varied.
Via iDrive:
1."My Vehicle"2."Vehicle settings"3.If necessary, "Climate functions"4."Temperature adjustment, upper body"5.Set the desired temperature.'yToward blue: colder.'yToward red: warmer.
This does not change the set interior temperaj
ture for the driver and front passenger.
Ventilation
in
rear,
center'yLever for changing the air flow direction,
arrow 1.'yThumbwheel for variable opening and
closing of the vents, arrow 2.
Rear
automatic
climate
control
Overview
Buttons
in
the
vehicle
Climate
control
functions
ButtonFunctionTemperature, refer to
page 217.AUTO program, refer to
page 217.Air distribution, manual, refer to
page 217.Seite 216ControlsClimate
control216
Online Edition for Part no. 01402984955 - X/17

ButtonFunctionSwitch off the system, refer to
page 217.Seat heating, refer to page 91.
Climate
control
functions
in
detail
Switching
on/off Via
iDrive
1."My Vehicle"2."Vehicle settings"3."Climate functions"4."Rear climate"
The rear automatic climate control is not readyfor operation if the automatic climate control is
switched off or if the function for defrosting the windows and removing condensation is active.
Using
the
button:
switching
on
Press any button except for the following:
'yOFF button.'ySeat heating.
Using
the
button:
switching
off
Press button.
Temperature
Concept
The automatic climate control achieves the set temperature as quickly as possible, if needed,
by using the maximum cooling or heating caj
pacity, and then keeps it constant.
Settings Press the left or right side of the butj
ton: decrease or increase temperaj
ture.
The selected temperature is shown on the disj
play of the automatic climate control.
Do not rapidly switch between different temj
perature settings. Otherwise, the automatic clij mate control will not have sufficient time to adj
just the set temperature.
AUTO
program
Concept
Air flow, air distribution and temperature are
controlled automatically.
Switching
on/off Press button.
The LED is illuminated with the AUTO
program switched on.
Depending on the selected temperature and
outside influences, the air is directed to the upj per body and into the floor area.
The air conditioning is switched on automatij
cally with the AUTO program.
Controlling
the
air
distribution manually
Concept
The air distribution for climate control can be
adjusted manually.
Operation Press button repeatedly to select a
program:'yUpper body region.'yUpper body region and floor area.'yFloor area.Seite 217Climate
controlControls217
Online Edition for Part no. 01402984955 - X/17

Parked-car
ventilation
Concept
The parked-car ventilation ventilates the car's interior. Depending on set temperature and ambient temperature, the car's interior is
cooled or possibly heated using the residual
engine heat.
General
information
The system can be switched on and off dij
rectly or via a pre-set departure time.
The activation time is determined based on the
external temperature. The system promptly
switches on before the selected departure
time.
Functional
requirements'yThe vehicle is in idle state or standby state
and not in drive-ready state.'yBattery is sufficiently charged.
If parked-car ventilation is switched on, the vehicle battery will be discharged. Thus,
limit the maximum activation time to save
the vehicle battery. The system will be available again after the engine is started or
after a short trip.'yMake sure that the vehicle's date and time
are set correctly.'yOpen the vents to allow air to flow out.
Switching
on/off
directly
General
information
There are different ways to switch the system
on or off.
The system switches off automatically after a certain period of time. The system continues
to run for some time after being switched off.
Using
the
button
When the vehicle is in standby state, the
parked-car ventilation can be switched on or
off via the automatic climate control buttons.
Press any button except:'yRear window defroster.'yLeft side of air flow button.'ySeat heating.'ySYNC program.'yMENU.
The system switches off after leaving and lockj
ing the vehicle.
Via
iDrive
1."My Vehicle"2."Vehicle settings"3.If necessary, "Climate functions"4."Comfort ventilation" or "Comfort heating/ ventilation"5."Activate now"
Via
BMW
display
key
Switching
on
1.Switch on the display of the BMW display
key.2."Precondit. setting"3.Tap the symbol or the symbol.4."Activate now"5."Start"
Switching
off
1.Switch on the display of the BMW display
key.2."Precondit. setting"3.Tap the symbol or the symbol.4."Stop"Seite 218ControlsClimate
control218
Online Edition for Part no. 01402984955 - X/17

Display
symbol on the automatic climate control inj
dicates the system is switched on.
REST is displayed on the automatic climate
control. The residual engine heat is used.
Departure
time Different departure times can be adjusted to
ensure a comfortable interior temperature in
the vehicle at the time of departure.
'yOne-time departure time: the time can be
set.
The system is switched on once.'yDeparture time with weekday: time and day
of the week can be set.
On the desired weekdays, the system will
be switched on promptly before the set dej parture time.
The departure time is preselected in two
steps:
'ySet departure times.'yActivate departure times.
Setting
the
departure
time
Via
iDrive
1."My Vehicle"2."Vehicle settings"3.If necessary, "Climate functions"4."Comfort ventilation" or "Comfort heating/ ventilation"5.Select the desired departure time.6.Set the departure time.7.Select day of the week, if needed.
Via
BMW
display
key
1.Switch on the display of the BMW display
key.2."Precondit. setting"3.Tap the symbol or the symbol.4.Select the desired departure time.5.Set the departure time.6.Select day of the week, if needed.7."OK"
Activating
the
departure
time
Functional
requirement
If a departure time is to influence the switching
on of parked-car ventilation, the respective dej
parture time must be activated first.
Via
iDrive
1."My Vehicle"2."Vehicle settings"3.If necessary, "Climate functions"4."Comfort ventilation" or "Comfort heating/ ventilation"5."For departure time"6.Activate the desired departure time.
, The symbol on the automatic climate
control signals an activated departure time
Via
BMW
display
key
1.Switch on the display of the BMW display
key.2."Precondit. setting"3.Tap the symbol or the symbol.4. Tap on symbol.5.Activate the desired departure time.
The symbol on the automatic climate
control signals an activated departure time.
Ambient
air
package
Concept
The Ambient Air Package can be used to clean and scent the interior air with high-quality fraj grances.
Seite 219Climate
controlControls219
Online Edition for Part no. 01402984955 - X/17

Ionization is used to clean the air from susjpended particles. Together with the selected
fragrance, ionization contributes to well-being and relaxation while driving.
General
information Two different fragrances can be selected in thevehicle. A variety of other fragrances is possijble by replacing the fragrance cartridges.
The following criteria can influence the perjception of scents in the car's interior:'yAutomatic climate control settings.'yTemperature and air humidity.'yTime of day and season.'yPhysical condition of the vehicle occujpants, for instance fatigue.
BMW recommends the use of genuine BMW
fragrance cartridges.
The genuine BMW fragrance cartridges are not
suitable for refilling. When a cartridge is empty, replace it with a new fragrance cartridge.
Safety
information WARNING
Refilled genuine BMW fragrance carj
tridges can cause the emission of harmful subj stances, malfunctions, and damage to the sysj
tem. There is a risk of injury or risk of damage
to property. Do not refill genuine fragrance carj
tridges. When a cartridge is empty, replace it
with a new fragrance cartridge.'