BMW X3 2018 Owner's Manual

Idle
state,
standby
state,
and
drive-ready
stateVehicle
features
and
options This chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
General
information
Depending on the situation, the vehicle is in
one of the three states:'yIdle state.'yStandby state.'yDrive-ready state.
Idle
state
Concept
If the vehicle is in idle state, it is switched off.
All power consumers are deactivated.
General
information
The vehicle is in idle state prior to opening
from the outside and after exiting and locking.
Safety
information WARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an acj cident. Before exiting, secure the vehicleagainst rolling.
In order to ensure that the vehicle is securedagainst rolling away, follow the following:'ySet the parking brake.'yOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'yOn uphill grades or on a downhill slope,
also secure the vehicle, for instance with a
wheel chock.'

Establishing
idle
state
when
opening
the
front
doors
Via iDrive:1."My Vehicle"2."Vehicle settings"3."Doors/Key"4."Turn off after door opening"
Manual
idle
state
To establish idle state in the vehicle after end
of trip:
Hold button down until the OFF
indicator on the instrument clusj
ter goes out.
Standby
state
Concept
When standby state is switched on, most funcj tions can be used while the vehicle is stationj
ary. Desired settings can be adjusted.
General
information The vehicle is in the standby state after the
front doors are opened from the outside.
Display
in
the
instrument
cluster
OFF is displayed in the instruj
ment cluster. The drivetrain is
switched off and standby state switched on.
Drive-ready
state Concept
Switching on drive-ready state corresponds to
starting the engine.
General
information
Some functions, such as DSC Dynamic Stabilj
ity Control, can only be used with drive-ready
state switched on.
Follow further information on the drive-ready
state, refer to page 99.
Switching
on
drive-ready
state Drive-ready state is switched on
via the Start/Stop button:1.Depress the brake pedal.2.Press the Start/Stop button.
Display
in
the
instrument
cluster
When drive-ready state is switched on, thetachometer shows the current engine speed.
Switching
off
drive-ready
state Press the Start/Stop button to switch off drive-ready state. The vehicle switches into standbystate.
Seite 22At
a
glanceIdle
state,
standby
state,
and
drive-ready
state22
Online Edition for Part no. 01402984955 - X/17

iDriveVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Concept
The iDrive combines the functions of many
switches. These functions can be operated via the Controller and, depending on the equipj
ment version, the touchscreen.
Safety
information WARNING
Operating the integrated information
systems and communication devices while driving can distract from traffic. It is possible tolose control of the vehicle. There is a risk of anaccident. Only use the systems or devices
when the traffic situation allows. If necessary,
stop and use the systems and devices while the vehicle is stationary.'

Switching
on1.Switch on standby state.2.Press the Controller.
Switching
off
1. Press button.2."Turn off control display"
Controller
with
navigation
system
General
information
The buttons can be used to open the menus
directly. The Controller can be used to select menu items and enter the settings.
Some iDrive functions can be operated using
the touchpad on the Controller, refer to
page 29.
Operation
'yTurn.'yPress.'yMove in four directions.
Buttons
on
the
Controller
ButtonFunctionPress once: call up main menu.
Press twice: display all menu items
of the main menu.Open the Communication menu.Open the Media/Radio menu.Open destination input menu for
navigation.Open navigation map.Press once: open the previous disj
play.
Press and hold: open the menus
used last.Open the Options menu.Seite 24At
a
glanceiDrive24
Online Edition for Part no. 01402984955 - X/17

Controller
without
navigation
system
General
information
The buttons can be used to open the menus
directly. The Controller can be used to select menu items and enter the settings.
Operation'yTurn.'yPress.'yMove in two directions.Buttons
on
the
ControllerButtonFunctionPress once: call up main menu.
Press twice: display all menu items
of the main menu.Open the Communication menu.Open the Media/Radio menu.Press once: open the previous disj
play.
Press and hold: open the menus
used last.Open the Options menu.
Operating
with
the
Controller
Opening
the
main
menu Press button.
The main menu is displayed.
All iDrive functions can be called up via the main menu.
Adapting
the
main
menu
1. Press the button twice.
All menu items of the main menu are disj
played.
Seite 25iDriveAt
a
glance25
Online Edition for Part no. 01402984955 - X/17

2.Select a menu item.3.To move the menu item to the desired pojsition, tilt the Controller to the right or left.
Selecting
menu
items
Highlighted menu items can be selected.
1.Turn the Controller until the desired menu
item is highlighted.2.Press the Controller.
Menu
items
in
the
Owner's
Manual
In the Owner's Manual, menu items that can be
selected are set in quotation marks, for inj
stance "iDrive settings".
Changing
between
displays
After a menu item is selected, for instance "iDrive settings", a new display appears.
'yMove the Controller to the left.
Closes the current display and shows the previous display.'y Press button.
The previous display opens.'yMove the Controller to the right.
New display is opened.
The arrow indicates that additional displays
can be opened.
Opening
recently
used
menus
The recently used menus can be displayed.
Press and hold this button.
Opening
the
Options
menu Press button.
The "Options" menu is displayed.
The Options menu consists of various areas:
'yScreen settings, for instance "Split
screen".'yControl options for the selected main menu, for instance for "Media/Radio".'yIf applicable, further operating options for
the selected menu, for instance "Save
station".
Changing
settings
1.Select a field.Seite 26At
a
glanceiDrive26
Online Edition for Part no. 01402984955 - X/17

2.Turn the Controller until the desired setjting is displayed.3.Press the Controller.
Activating/deactivating
the
functions
Several menu items are preceded by a checkj
box. The checkbox indicates whether the funcj tion is activated or deactivated. Selecting themenu item activates or deactivates the funcj
tion.
Function is activated.
Function is deactivated.
Entering
letters
and
numbers
General
information
Letters and numbers can be entered using the Controller or the touchscreen. The keyboard'sdisplay changes automatically.
Input
1.Turn the Controller: select letters or numj
bers.2. : confirm entry.
Deleting
SymbolFunction Press the Controller: delete letters
or number. Hold the Controller down: delete all
letters or numbers.Switching
between
upper/lower
case,
numbers
and
characters
Depending on the menu, you can switch bej
tween entering upper and lower case, letters and numbers.SymbolFunction Enter the letters. Enter the numbers. or

Change between capital and
lower-case letters.
Entry
comparison
When entering names and addresses, the
choice is narrowed down with every letter enj
tered and letters may be added automatically.
Entries are continuously compared with datastored in the vehicle.
'yOnly those letters are offered during entry
for which data is available.'yDestination search: place names can be entered in all languages that are available
in iDrive.
Using
alphabetical
lists
For alphabetical lists with more than 30 enj tries, the letters for which there is an entry are
displayed at the left edge.
1.Turn the Controller to the left or right
quickly.
All letters for which there are entries are displayed on the left edge.2.Select the first letter of the desired entry.
The first entry of the selected letter is disj
played.Seite 27iDriveAt
a
glance27
Online Edition for Part no. 01402984955 - X/17

Operating
via
touchscreenGeneral
information
The Control Display is equipped with a touchj
screen.
Touch screen with your fingers. Do not use any objects.
Opening
the
main
menu
Tap on symbol.
All iDrive functions can be called up via themain menu.
Adapting
the
main
menu
1. Tap on symbol.
All menu items of the main menu are disj
played.2.Drag the menu item to the desired position
on the right or left.
Selecting
menu
items
Tap desired menu item.
Menu
items
in
the
Owner's
Manual In the Owner's Manual, menu items that can be
selected are set in quotation marks, for inj
stance "iDrive settings".
Changing
between
displays
After a menu item is selected, a new display
opens.
The arrow indicates that additional displays
can be opened.
'ySwipe to the left.'yTap on symbol.
New display is opened.
Changing
settings
Settings such as volumes can be changed via the touchscreen.
'ySlide in the selected field to the right orleft, until the desired setting is displayed.'y , Tap on symbol.
Activating/deactivating
the
functions
Several menu items are preceded by a checkj
box. The checkbox indicates whether the funcj tion is activated or deactivated. Selecting the
Seite 28At
a
glanceiDrive28
Online Edition for Part no. 01402984955 - X/17

menu item activates or deactivates the funcj
tion.
Function is activated.
Function is deactivated.
Entering
letters
and
numbers
General
information
Letters and numbers can be entered using the Controller or the touchscreen.
The keyboard's display changes automatically.
SymbolFunction Tapping the symbol: delete the letj
ter or number. Tapping and holding the symbol for
an extended period: delete all letters
or numbers.
Switching
between
upper/lower
case,
numbers
and
characters
SymbolFunction Enter the letters. Enter the numbers. or

Change between capital and
lower-case letters.
Operating
navigation
map
The navigation map can be moved with the
touchscreen.
FunctionOperationEnlarge/shrink
map.Drag in or out with the finj
gers.Touchpad
General
information
Some iDrive functions can be operated using
the touchpad on the Controller.
Selecting
functions1."My Vehicle"2."iDrive settings"3."Touchpad"4.Select the desired setting.'y"Speller": enter letters and numbers.'y"Map": using the map.'y"Search fields": write letters without
selecting the list field.'y"Audio feedback": pronounces entered
letters and numbers.
Entering
letters
and
numbers
Entering letters requires some practice at the
beginning. When entering, pay attention to the
following:
'yThe system distinguishes between upper and lower-case letters and numbers. Tomake entries, it may be necessary to
change between upper and lower-case letj
ters, numbers and characters, refer to
page 27.'yEnter characters as they are displayed on
the Control Display.'yAlways enter associated characters, such
as accents or periods so that the letter can
be clearly recognized. The set language determines what input is possible. Where
necessary, enter special characters via the
Controller.Seite 29iDriveAt
a
glance29
Online Edition for Part no. 01402984955 - X/17

Entering
special
charactersInputOperationDelete a characj
ter.Swipe to the left on the
touchpad.Enter a blank
space.Swipe to the right in the
center of the touchpad.Enter a hyphen.Swipe to the right in the
upper area of the touchj
pad.Enter an underj
score.Swipe to the right in the
lower area of the touchj
pad.
Using
the
map
The map in the navigation system can bemoved via the touchpad.
FunctionOperationMove map.Swipe in the appropriate dij
rection.Enlarge/shrink
map.Drag in or out on the touchj pad with fingers.Display menu.Tap once.
Split
screen
General
information Additional information can be displayed in sevj
eral menus on the right side of the split screen, for instance information from the OnboardComputer.
In the divided screen view, the so-called split
screen, this information remains visible even when switching to another menu.
Switching
the
split
screen
on/off
1. Press button.2."Split screen"Selecting
the
display
The display can be selected in menus, where
the split screen is supported.1.Move the Controller to the right until the
split screen is selected.2.Press the Controller.3.Select the desired setting.
Specifying
the
number
of
displays
It is possible to specify the number of displays.
1.Move the Controller to the right until the
split screen is selected.2.Press the Controller.3."Personalize menu"4.Select the desired setting.5.Move the Controller to the left.
Status
information
General
information The status field can be found in the upper areaof the Control Display. Status information is
displayed in the form of symbols.
Status
field
symbols
Radio
SymbolMeaning HD Radio station is being received. Satellite radio is switched on.Seite 30At
a
glanceiDrive30
Online Edition for Part no. 01402984955 - X/17