temperature BMW X3 2023 Owners Manual

Turning offPress and hold the button until theLEDs turn off.
Seat heating distribution The heating effect in the seat surface and the
seat backrest can be distributed in different
ways.1."CAR"2."Settings"3."Climate control"4.Select the desired menu item.5.Select desired seat.6.Press the Controller and turn it to set the seat heating distribution.
Active seat ventilation
Principle
Integrated fans in the seat and armrest areas provide a comfortable seat temperature.
Overview
Active seat ventilation
Switching on active seat ventilation Press the button once for each venti

Adjusting the rain sensor sensitivity
Turn the thumbwheel to adjust the sensitivityof the rain sensor.
Upward: high rain sensor sensitivity.
Downward: low rain sensor sensitivity.
Windshield washer system Safety information
Warning
The washer fluid can freeze onto the window at low temperatures and obstruct the view. There is a risk of accident. Only use the
washer systems if the washer fluid cannot freeze. Use washer fluid with antifreeze, ifneeded.
NOTICE
When the washer fluid reservoir is empty,
the washer pump cannot work as intended. There is a risk of damage to property, among
other potential damage. Do not use the washer system when the washer fluid reser

Functional requirement
Launch Control is available when the engine
is at operating temperature. The engine is at
operating temperature after an uninterrupted trip of at least 6 miles/10 km.
Starting with launch control1.Turn on drive

Time 61
Instrument cluster without
enhanced features:Overview
1Fuel gauge 1652Speedometer3Check Control 158
Widgets 157
Service notifications 168
Trip odometer, see Trip data 170
Navigation display
Range 1684Tachometer 166
Power gauge 1665Engine temperature 1676Outside temperature 168
Transmission display
Status, Driving Dynamics Control 137
Time 617Speed Limit Info 219
Central display range
Depending on the equipment and configura

Outside temperature
General information
If the indicator drops to +37 /+3

7.Set the desired temperature.8."OK"
Do not rapidly change between different tem

Mount for trailer hitch
General information
The mount for the trailer hitch is located on therear of the vehicle.
Information on suitable trailer hitches is found on the underside of the mount, see arrow.
Remove the ball head when driving without a trailer or load carrier.
Follow the Maintenance Instructions, refer to
page 386.
Safety information
Warning
During driving, high temperatures can occur underneath the vehicle body, for instance
caused by the exhaust system. Contact with
the hot components can cause burns. There
is a risk of injury. Do not touch hot compo

Current tire temperatureDepending on the model, the current tire tem