BMW X4 2018 Service Manual

Safety
informationWARNING
During no-touch activation, vehicle parts
may be touched, e.g., hot exhaust system.
There is a risk of injury. When moving your
foot, make sure you have a firm stance and do not touch the vehicle.'

whether the doors are also unlocked when unjlocking with the remote control. Adjusting the
settings, refer to page 46.
Safety
information WARNING
Body parts can be jammed when operatj
ing the tailgate. There is a risk of injury. Make sure that the area of movement of the tailgateis clear during opening and closing.'

ClosingFrom
the
outside
Press the button on tailgate's exterior.
From
the
inside Pull and hold the button in the driver
door.
The remote control must be located in the inj
terior for this function.
From
inside
the
tailgate
Without Comfort Access:
Press button on the inside of the tailgate.
With Comfort Access:
'yPress button, arrow 1, on the inside of the
tailgate.'yPress button, arrow 2.
The vehicle will be locked after closing the
tailgate. The driver's door must be closed
for this purpose and the remote control
must be outside of the vehicle in the area
of the tailgate.Canceling
the
closing
operation
The closing procedure is interrupted in the folj
lowing situations:'yIf the vehicle starts off with a jerky movej
ment.'yBy pressing the button on the outside of
the tailgate.'yBy pressing the button on the inside of the tailgate.'yBy releasing the button in the driver's door.
Malfunction
Safety
information WARNING
With manual operation of a blocked tailj
gate, it can release itself unexpectedly from the blockage. There is a risk of injury or risk ofproperty damage. Do not operate the tailgatemanually if it is blocked. Have it checked by a
dealerss service center or another qualified service center or repair shop.'

Personal
Profile
Concept
Via Personal Profiles, individual settings for
several drivers can be stored and called up again when required.
General
information
There are three driver profiles with which perj sonal vehicle settings can be stored. Every rejmote control has one of these driver profiles
assigned.
If the vehicle is unlocked using a remote conj
trol, the assigned personal driver profile will be
activated. All settings stored in the driver proj
file are automatically applied.
If several drivers use their own remote control,
the vehicle will adjust the personal settings
during unlocking. These settings are also rej
stored, if the vehicle has been used in the
meantime by a person with a different remote control.
Changes to the settings are automatically
stored in the driver profile currently activated.
If another driver profile is selected via iDrive, the settings stored in it will be applied autoj
matically. The new driver profile is assigned to the remote control currently used.
There is an additional guest profile available
that is not assigned to any remote control: it
can be used to apply settings in the vehicle
without changing the personal driver profiles.
Functional
requirements
For the system to be able to identify the driver profile associated to a particular driver, the dej
tected remote control must be clearly alloj
cated to the driver.
This is the case when:'yThe driver is only carrying his or her own
remote control.'yThe driver unlocks the vehicle.'yThe driver gets into the vehicle through the
driver's door.
Settings
The settings for the following systems and
functions are stored in the active profile. The
scope of storable settings depends on country
and equipment.
'yUnlocking and locking.'yLights.'yClimate control.'yRadio.'yInstrument cluster.'yProgrammable memory buttons.'yVolumes, tone.'yControl Display.'yNavigation.'yPDC Park Distance Control.'yRearview camera.'ySide View.'yTop View.'yHead-up Display.'yDriving Dynamics Control.'yDriver's seat position, exterior mirror posij tion, steering wheel position.'yIntelligent Safety.'yActive Blind Spot Detection.
Profile
management
Opening
profiles Regardless of the remote control in use, a difjferent profile may be activated. This allows youto call up personal vehicle settings, even if you
did not unlock the vehicle with your own rej
mote control.
Using iDrive:
1."Settings"2."Profiles"3.Select a profile.Seite 44ControlsOpening
and
closing44
Online Edition for Part no. 01402977904 - II/17

The following functions are executed:'yAll settings stored in the called-up profileare automatically applied.'yThe called-up profile is assigned to the rejmote control being used at the time.'yIf the profile is already assigned to a differjent remote control, this profile will apply toboth remote controls.
Using
a
guest
profile
The guest profile is for individual settings thatare stored in none of the three personal proj
files.
Using iDrive:
1."Settings"2."Profiles"3."Guest"
The guest profile cannot be renamed. It is not assigned to the current remote control.
Renaming
profiles A personal name can be assigned to every projfile to avoid confusion between the profiles.
Using iDrive:
1."Settings"2."Profiles"
The active profile is selected.3.Open "Options".4."Rename current profile"
Reset
profiles
The settings of the profile currently in use are reset to their factory settings.
Using iDrive:
1."Settings"2."Profiles"3.Open "Options".4."Reset current profile"Exporting
profiles Most settings of the profile currently in use canbe exported.
Exporting can be helpful for storing and rej trieving personal settings, for instance before
delivering the vehicle to a workshop. Profiles
can be taken to another vehicle equipped with
the Personal Profile function.
Using iDrive:1."Settings"2."Profiles"3."Export profile"4.BMW Online: "BMW Online"
USB interface: "USB device"
Popular file systems for USB media are supj
ported. FAT32 and exFAT are the recomj
mended formats for profile export. Other forj
mats may not support the export.
Importing
profiles
Profiles exported via BMW Online can also be imported via BMW Online.
Profiles stored on a USB storage device can be
imported via the USB interface.
Existing settings are overwritten with the imj
ported profile.
Using iDrive:
1."Settings"2."Profiles"3."Import profile"4.BMW Online: "BMW Online"
USB interface: "USB device"
Display
profile
list
during
start
The profile list can be displayed during each
start to select the desired profile.
Using iDrive:
1."Settings"2."Profiles"Seite 45Opening
and
closingControls45
Online Edition for Part no. 01402977904 - II/17

3.Open "Options".4."Display user list at startup"
System
limits
A clear assignment between the remote conj
trol and driver may not be possible in the folj
lowing cases, for example.
'yThe passenger unlocks the vehicle with his or her own remote control, but anotherperson is driving.'yThe driver unlocks the vehicle via Comfort
Access and has multiple remote controls with him or her.'yThe driver changes, but the vehicle is notlocked and unlocked.'yMultiple remote controls are located outjside of the vehicle.
Settings
General
information
Depending on your vehicle's equipment and
the country version, various settings for openj ing and closing are possible.
These settings are stored for the driver profile,
refer to page 44, currently used.
Unlocking
Doors Using iDrive:
1."Settings"2."Doors/key"3. Select the symbol.4.Select the desired function:'y"Driver's door only"
Only the driver's door and the fuel filler
flap are unlocked. Pressing again unj locks the entire vehicle.'y"All doors"The entire vehicle is unlocked.
Tailgate
Using iDrive:
1."Settings"2."Doors/key"3. Select the symbol.4.Select the desired function:'y"Tailgate"
The tailgate is opened.'y"Tailgate + door(s)"
The tailgate is opened and the doors
unlocked.
Confirmation
signals
from
the
vehicle
Using iDrive:
1."Settings"2."Doors/key"3.Deactivate or activate the desired confirj mation signals.'yWith alarm system:
"Acoustic sig. lock/unlock"
Unlocking is signaled by one honk of the horn.'y"Flash when lock/unlock"
Unlocking is signaled by two flashes,
locking by one.
Automatic
locking
Using iDrive:
1."Settings"2."Doors/key"3.Select the desired function:'y"Lock if no door is opened"
The vehicle locks automatically after a
short period of time if no door is
opened after unlocking.'y"Lock after start driving"Seite 46ControlsOpening
and
closing46
Online Edition for Part no. 01402977904 - II/17

The vehicle locks automatically afteryou drive off.
Adjusting
the
last
seat
and
mirror
position
Using iDrive:
1."Settings"2."Doors/key"3."Last seat position autom."
When the vehicle is unlocked, the driver's seat
and exterior mirrors resume their last set posij tions.
Alarm
system General
information
When the vehicle is locked, the vehicle alarm system reacts to the following changes:
'yUnauthorized opening of a door, the hood
or the tailgate.'yMovements in the car's interior.'yChanges in the vehicle tilt, e. g., during atj tempts at stealing a wheel or when towing
the vehicle.'yDisconnected battery voltage.
The alarm system signals these changes visuj
ally and acoustically:
'yAcoustic alarm.
Depending on local regulations, the acousj
tic alarm may be suppressed.'yBy switching on the hazard warning sysj tem.'yBy flashing the daytime running lights.
Switching
on
and
off
When you lock and unlock the vehicle with the
remote control or with Comfort Access, the alarm system is switched on and off at thesame time.
Opening
the
doors
with
the
alarm
system
switched
on
The alarm system is triggered when a door is opened if the door was unlocked using theintegrated key in the door lock.
Switching off the alarm, refer to page 48.
Opening
the
tailgate
with
the
alarm
system
switched
on
The tailgate can be opened even when the
alarm system is switched on.
After the tailgate is closed, it is locked and
monitored again provided the doors are locked. The hazard warning system flashesonce.
Panic
mode
You can trigger the alarm system if you find yourself in a dangerous situation.'yPress button on the remote conj
trol and hold for at least 3 secj
onds.'yBriefly press the button on the remote conj
trol three times in succession.
To switch off the alarm: press any button.
Indicator
light
on
the
interior
mirror
'yThe indicator light flashes briefly every 2 seconds:
The alarm system is switched on.'yIndicator light flashes for approx. 10 secj onds, then it flashes briefly every 2 secj
onds:Seite 47Opening
and
closingControls47
Online Edition for Part no. 01402977904 - II/17

Interior motion sensor and tilt alarm sensor
are not active, as doors, hood, or tailgate are not correctly closed. Correctly closedaccess points are secured.
When the still open access points are
closed, interior motion sensor and tilt alarm
sensor will be switched on.'yThe indicator light goes out after unlockj
ing:
The vehicle has not been tampered with.'yThe indicator light flashes after unlocking until the engine ignition is switched on, butno longer than approx. 5 minutes:
An alarm has been triggered.
Tilt
alarm
sensor The tilt of the vehicle is monitored.
The alarm system responds in situations such
as attempts to steal a wheel or when the vehij
cle is towed.
Interior
motion
sensor
The windows and the glass sunroof must be
closed for the system to function properly.
Avoiding
unintentional
alarms
General
information
The tilt alarm sensor and interior motion senj
sor can trigger an alarm, although no unauthorj ized action occurred.
Possible situations for an unwanted alarm:
'yIn automatic vehicle washes.'yIn duplex garages.'yDuring transport on trains carrying vehij
cles, at sea or on a trailer.'yWith animals in the vehicle.
The tilt alarm sensor and the interior motion sensor can be switched off in such situations.
Switching
off
the
tilt
alarm
sensor
and
interior
motion
sensor
Press the remote control button again
within 10 seconds as soon as the vehicle
is locked.
The indicator lamp lights up for approx. 2 secj
onds and then continues to flash.
The tilt alarm sensor and interior motion senj
sor are turned off until the vehicle is locked
again.
Switching
off
the
alarm'yUnlock the vehicle with the remote control or switch on the ignition, if needed through
emergency detection of remote control, rej fer to page 37.'yWith Comfort Access:
If you are carrying the remote control on
your person, grasp the door handle on the driver's or front passenger door comj
pletely.
Power
windows
Safety
information WARNING
When operating the windows, body parts
and objects can be jammed. There is a risk of injury or risk of property damage. Make surethat the area of movement of the windows isclear during opening and closing.'

'yEngaging selector lever position N.'yUsing vehicle equipment.
There is a risk of accidents or injuries. Do notleave children or animals unattended in the vej
hicle. Take the remote control with you when exiting and lock the vehicle.'

Safety
switch
General
information
The safety switch in the driver's door can be
used to prevent children, for instance from
opening and closing the rear windows using
the switches in the rear.
If an accident of a certain severity occurs, the safety function is switched off automatically.
Switching
on
and
off Press button.
The LED lights up if the safety funcj
tion is switched on.
Glass
sunroof,
electric
General
information The glass sunroof and the sliding visor can be
operated together or separately using the
same switch.
The glass sunroof is operational when the ignij tion is switched on.
Safety
information WARNING
Body parts can be jammed when operatj
ing the glass sunroof. There is a risk of injury. Make sure that the area of movement of theglass sunroof is clear during opening and closjing.'