BMW X5M 2018 Owners Manual

Page 121 of 284

Activating/deactivatingthespeed
warning
Via iDrive:1."My Vehicle"2."Vehicle settings"3."Speed warning"4."Speed warning"5.Press the Controller.
Settingyourcurrentspeedasthe
speedwarning
Via iDrive:
1."My Vehicle"2."Vehicle settings"3."Speed warning"4."Select current speed"5.Press the Controller.
Head-upDisplay
Concept
This system projects important information
into the driver's field of vision, for instance the
speed.
The driver can get information without averting his or her eyes from the road.
Overview
Switchingon/off
Via iDrive:1."My Vehicle"2."iDrive settings"3."Displays"4."Head-Up Display"5."Head-Up Display"
Display
Standardview The following information is displayed on theHead-up Display:
'ySpeed.'yNavigation system.'yCheck Control messages.'ySelection list from the instrument cluster.'yDriver assistance systems.
Some of this information is only displayed briefly as needed.
Mview
1Current engine speed, highlighted2Shift point indicator3Pre-warning field, speed display4Red warning field, speed display5Speed6Gear display/warning messages
Activate M view:
Select displays in the Head-up Display.
Seite 121DisplaysControls121
Online Edition for Part no. 01402985049 - X/17

Page 122 of 284

SelectingdisplaysintheHead-upDisplay
Via iDrive:1."My Vehicle"2."iDrive settings"3."Displays"4."Head-Up Display"5."Displayed information"6.Select the desired displays in the Head-up Display.
Settingthebrightness
The brightness is automatically adjusted to the
ambient brightness.
The basic setting can be adjusted manually. Via iDrive:
1."My Vehicle"2."iDrive settings"3."Displays"4."Head-Up Display"5."Brightness"6.Turn the Controller until the desired brightjness is set.7.Press the Controller.
When the low beams are switched on, the
brightness of the Head-up Display can be adj
ditionally influenced using the instrument lightj ing.
Settings are stored for the profile currently used.
Adjustingtheheight
Via iDrive:
1."My Vehicle"2."iDrive settings"3."Displays"4."Head-Up Display"5."Height"6.Turn the Controller until the desired height
is reached.7.Press the Controller.
Settings are stored for the profile currently used.
The height of the Head-up Display can also be
stored using the memory function, refer to
page 80.
Settingtherotation
The screen of the Head-up Display can be roj
tated around its own axis.
Only set the rotation while the vehicle is staj
tionary and the ignition is switched on.
Via iDrive:
1."My Vehicle"2."iDrive settings"3."Displays"4."Head-Up Display"5."Rotation"6.Turn the Controller until the desired setj ting is selected.7.Press the Controller.
Settings are stored for the profile currentlyused.
Displayvisibility The visibility of the displays in the Head-up
Display is influenced by the following factors:
'yCertain sitting positions.'yObjects on the cover of the Head-up Disj
play.'ySunglasses with certain polarization filters.'yWet roads.'yUnfavorable light conditions.
If the image is distorted, have the basic setj tings checked by a dealerss service center or
another qualified service center or repair shop.
Follow the instructions for cleaning the Head- up Display, refer to page 264.
Seite 122ControlsDisplays122
Online Edition for Part no. 01402985049 - X/17

Page 123 of 284

Specialwindshield
The windshield is part of the system.
The shape of the windshield makes it possible to display a precise image.
A film in the windshield prevents double imj ages from being displayed.
For this reason, it is strongly suggested to have the special windshield replaced by a dealj
erss service center or another qualified service center or repair shop, if necessary.
Shiftpointindicator
Generalinformation
The display is in the Head-up Display.
ShiftpointindicatorintheHead-up
Display
Switchingon Shift lights are only shown in the Head-up Disj
play in the M view, refer to page 121.1.Switch on Head-up Display, refer to
page 121.2."My Vehicle"3."iDrive settings"4."Displays"5."Head-Up Display"6."Displayed information"7."M view"
Display
'yCurrent engine speed is displayed in the
tachometer.'yArrow 1: successive yellow illuminated
fields indicate the upcoming shift moment.'yArrow 2: fields are illuminated in red. Do
not wait any further to shift.
When the maximum possible speed is
reached, the entire display flashes.
When the maximum speed is exceeded, the
supply of fuel is interrupted in order to protect
the engine.
Vehiclestatus
Generalinformation The status can be displayed and actions perj
formed for several systems.
Openingthevehiclestatus
Via iDrive:
1."My Vehicle"2."Vehicle status"
Informationataglance
'y "Flat Tire Monitor": status of the Flat
Tire Monitor, refer to page 137.'y "Tire Pressure Monitor": status of the
Tire Pressure Monitor, refer to page 133.'y "Engine oil level": Electronic engine
oil level check, refer to page 241.'y "Check Control": Check Control mesj
sages are stored in the background and
can be displayed on the Control Display.
Displaying stored Check Control mesj
sages, refer to page 111.'y "Service required": Displaying servj
ice requirements, refer to page 115.'y "Teleservice Call": service request.Seite 123DisplaysControls123
Online Edition for Part no. 01402985049 - X/17

Page 124 of 284

LightsVehiclefeaturesandoptionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Overview Switchesinthevehicle
The light switch element is located next to the
steering wheel.
SymbolFunctionFront fog lights.Automatic headlight control.
Adaptive light functions.Lights off.
Daytime running lights.Parking lights.SymbolFunctionLow beams.Instrument lighting.
Parkinglights,lowbeams
androadsideparkinglights
Generalinformation
Position of switch:
, ,
If the driver's door is opened when the ignition is switched off, the exterior lighting is automatj
ically switched off.
Parkinglights
Position of switch:

The vehicle is illuminated on all sides.
Do not use the parking lights for extended pej
riods; otherwise, they might drain the battery
and it would then be impossible to start the enj
gine.
When parking, switch on the one-sided roadj
side parking light, refer to page 124.
Lowbeams
Position of switch:

The low beams light up when the ignition is
switched on.
Roadsideparkinglight
Concept
The vehicle can be illuminated on one side.
Seite 124ControlsLights124
Online Edition for Part no. 01402985049 - X/17

Page 125 of 284

Switchingon
With radio-ready state switched off, press the
lever either up or down past the resistance point for approx. 2 seconds.
Switchingoff Briefly press the lever to the resistance point in
the opposite direction.
Welcomelightsand
headlightcourtesydelay
feature
Welcomelights
Generalinformation
Depending on the vehicle equipment and the ambient brightness, individual light functions
may be switched on briefly when the vehicle is
unlocked.
Activating/deactivating
Position of switch:
,
Via iDrive:
1."My Vehicle"2."Vehicle settings"3."Lighting"4."Exterior lighting"5."Welcome lights"
The setting is stored for the driver profile curj
rently used.
Headlightcourtesydelayfeature
Generalinformation
The low beams stay lit for a short while if the
headlight flasher is switched on after the radio-
ready state is switched off.
Settingtheduration Via iDrive:1."My Vehicle"2."Vehicle settings"3."Lighting"4."Exterior lighting"5."Pathway lighting"6.Set length of time.
The setting is stored for the driver profile curj
rently used.
Automaticheadlightcontrol Concept
The low beams are switched on and off autoj matically depending on the ambient brightj
ness, for instance in tunnels, in twilight or if there is precipitation.
Generalinformation
A blue sky with the sun low on the horizon can
cause the lights to be switched on.
When emerging from a tunnel during the day,
the low beams are not switched off immedij
ately but instead only after approx. 2 minutes.
The low beams always stay on when the fog
light is switched on.
Activating Position of switch:

The indicator light in the instrument cluster is
illuminated when the low beams are switched
on.
Seite 125LightsControls125
Online Edition for Part no. 01402985049 - X/17

Page 126 of 284

Systemlimits
The automatic headlight control cannot serve
as a substitute for your personal judgment of
lighting conditions.
For example, the sensors are unable to detect
fog or hazy weather. To avoid safety risks unj
der these conditions, you should always switch
on the lights manually.
Daytimerunninglights
Generalinformation Position of switch:
, ,
The daytime running lights light up when the
ignition is switched on. After the ignition is
switched off, the parking lights light up in posij
tion
.
Activating/deactivating In some countries, daytime running lights are
mandatory, so it may not be possible to deactij
vate the daytime running lights.
Via iDrive:
1."My Vehicle"2."Vehicle settings"3."Lighting"4."Exterior lighting"5.Select the desired setting.
Settings are stored for the profile currently used.
Adaptivelightfunctions
Concept
Adaptive light functions enable dynamic illumij
nation of the roadway.
Generalinformation
The adaptive light functions may consist of
one system or multiple systems, depending on
the equipment version:'yAdaptive Light Control, refer to page 126.'yCornering light, refer to page 126.
Activating
Position of switch:

The adaptive light functions are active when
the engine is running.
AdaptiveLightControl Depending on the steering angle and other paj
rameters, the light from the headlight follows the course of the road.
To avoid blinding oncoming traffic, the Adapj
tive Light Control does not swivel to the oppoj
site lane when the vehicle is at a standstill.
Corneringlight
In tight curves, for instance on mountainous
roads or when turning, an additional, cornering light is switched on that lights up the inside of
the curve better when the vehicle is moving
below a certain speed.
The cornering light is automatically switched on depending on the steering angle or the useof turn signals.
When driving in reverse, the cornering lights
may be automatically switched on regardless of the steering angle.
Adaptiveheadlightrange
control
The adaptive headlight range control compenj
sates for acceleration and braking operations
in order not to blind the oncoming traffic and to
achieve optimum illumination of the roadway.
Seite 126ControlsLights126
Online Edition for Part no. 01402985049 - X/17

Page 127 of 284

High-beamAssistantConcept
The high-beam Assistant detects other traffic
participants early on and automatically
switches the high beams on or off depending
on the traffic situation.
Generalinformation
The high-beam Assistant ensures that the high beams are switched on, whenever the traffic
situation allows. In the low speed range, the high beams are not switched on by the system.
The system responds to light from oncoming
traffic and traffic driving ahead of you, and to
adequate illumination, for instance in towns
and cities.
The high beams can be switched on and off at
any time as usual.
Activating/deactivating
Position of switch, depending on the vehicle
equipment:
,
Press and hold button on signal lever.
The indicator light in the instrument
cluster is illuminated when the low
beams are switched on.
The headlights are automatically switched bej tween low beams and high beams.
The blue indicator light in the instruj
ment cluster lights up when the system
switches on the high beams.
The high-beam Assistant is deactivated when manually switching the high beams on and off,
refer to page 96.
To reactivate the high-beam Assistant, press the button on the turn signal lever.
Systemlimits
The high-beam Assistant cannot serve as a substitute for the driver's personal judgment of
when to use the high beams. In situation that require this, therefore switch off manually.
The system is not fully functional in the followj ing situations, and driver intervention may be
necessary:'yIn very unfavorable weather conditions,
such as fog or heavy precipitation.'yWhen detecting poorly-lit road users such
as pedestrians, cyclists, horseback riders
and wagons; when driving close to train or ship traffic; and at animal crossings.'yIn tight curves, on hilltops or in depresj
sions, in cross traffic or half-obscured onj coming traffic on highways.'yIn poorly-lit towns and cities and in thepresence of highly reflective signs.'yWhen the windshield in front of the interior
mirror is fogged over, dirty or covered with stickers, etc.
Foglights
Frontfoglights
Concept
The front fog lights work alongside the low
beams to illuminate a wider area of the roadj
way.
Functionalrequirement
The low beams must be switched on before switching on the front fog lights.
Seite 127LightsControls127
Online Edition for Part no. 01402985049 - X/17

Page 128 of 284

Switchingon/offPress button.
The green indicator light lights up if
the front fog lights are switched on.
If the automatic headlight control, refer topage 125, is activated, the low beams will
come on automatically when you switch on the front fog lights.
When the high beams or headlight flasher are
activated, the front fog lights are not switched
on.
Instrumentlighting Functionalrequirement
The parking lights or low beams must be
switched on to adjust the brightness.
Settings Adjust the brightness with the
thumbwheel.
Interiorlights
Generalinformation
Depending on the equipment, the interior
lights, footwell lights, entry lights, and courtesy
lights are controlled automatically.
Thumbwheel for the instrument lighting conj
trols brightness of some of these features.Overview1Interior lights2Reading lights
Switchingtheinteriorlightson/off
Press button.
To switch off permanently: press the button
and hold for approx. 3 seconds.
Switchingthereadinglightson/off Press button.
Depending on the vehicle equipment, the reading lights are located next to the interior
lights in the front and rear.
Ambientlight
Generalinformation Depending on the equipment version, lighting
can be adjusted for some lights in the car's inj
terior.
Selectingcolorscheme Via iDrive:
1."My Vehicle"2."Vehicle settings"3."Lighting"4."Interior lighting"5."Lighting design"6.Select the desired setting.Seite 128ControlsLights128
Online Edition for Part no. 01402985049 - X/17

Page 129 of 284

To deactivate the ambient light: "Off".
Settingthebrightness Via iDrive:1."My Vehicle"2."Vehicle settings"3."Lighting"4."Interior lighting"5."Brightness"6.Adjust the brightness.Seite 129LightsControls129
Online Edition for Part no. 01402985049 - X/17

Page 130 of 284

SafetyVehiclefeaturesandoptions
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., dueto the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Airbags
1Front airbag, driver2Front airbag, front passenger3Head airbag4Side airbag5Knee airbagFrontairbags
Front airbags help protect the driver and the front passenger by responding to frontal imj
pacts in which safety belts alone would not
provide adequate protection.Sideairbag
In a lateral impact, the side airbag supports the
side of the body in the chest and lap area.
Headairbag In a lateral impact, the head airbag supportsthe head.Seite 130ControlsSafety130
Online Edition for Part no. 01402985049 - X/17

Page:   < prev 1-10 ... 81-90 91-100 101-110 111-120 121-130 131-140 141-150 151-160 161-170 ... 290 next >