BMW X5M 2018 Manual PDF

Opening/closing
the
glass
sunroof
and
sun
protection
separately'yPress the switch in the dej
sired direction to the resistj
ance point and hold it there.
Holding down the switch
opens the sun protection. If
the sun protection is already
fully open, the glass sunroof
opens.
The glass sunroof closes
while the switch is being
held. If the glass sunroof is
already closed or in the tilted
position, the sun protection
closes.'yPress the switch in the desired direction
past the resistance point.
The sun protection opens automatically. If the sun protection is already fully open, the
glass sunroof opens automatically.
The glass sunroof closes automatically. If the glass sunroof is already closed or in the
tilted position, the sun protection closes
automatically.
Pressing the switch upward stops the moj tion.
Opening/closing
the
glass
sunroof
and
sun
protection
together
Briefly press the switch twice insuccession in the desired direcj tion past the resistance point.
The glass sunroof and sun projtection move together. Pressing
the switch upward stops the motion.
Convenient opening via the remote control, rej
fer to page 53.
Closing via Comfort Access, refer to page 57.
Comfort
position
In some models, the wind noises in the car's
interior are lowest when the glass sunroof is
not fully open. In these models, the automatic
function initially only opens the glass sunroof
up to this comfort position.
Pressing the switch again opens the glass sunj
roof fully.
Jam
protection
system
General
information
If the closing force exceeds a certain value when closing the glass sunroof, the closing opj
eration is interrupted once the roof reaches the half-open position, or it is stopped when closj
ing from the tilted position. The glass sunroof
opens slightly.
Closing
from
the
open
position
without
jam
protection
If there is an external danger, proceed as folj
lows:1.Push the switch forward past the resistj
ance point and hold.
The glass sunroof closes with limited jam protection. If the closing force exceeds aspecific threshold, closing is interrupted.2.Push the switch forward again past the rej
sistance point and hold until the glass sunj
roof closes without jam protection. Make sure that the closing area is clear.Seite 71Opening
and
closingControls71
Online Edition for Part no. 01402985049 - X/17

Closing
from
the
raised
position
without
jam
protection
If there is an external danger,
push the switch forward past the
resistance point and hold it.
The glass sunroof closes withj
out jam protection.
Initializing
after
a
power
interruption General
information After a power failure during the opening or
closing process, the glass sunroof can only be
operated to a limited extent.
The system can be initialized under the followj
ing conditions.'yThe vehicle is parked in a horizontal posij
tion.'yThe engine is running.'yThe external temperature is above
41 

SettingsVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Sitting
safely
An ideal seating position that meets the needs
of the occupants can make a vital contribution to relaxed, fatigue-free driving.
In the event of an accident, the correct seating
position plays an important role. Follow the inj formation in the following chapters:'ySeats, refer to page 73.'ySafety belts, refer to page 77.'yHead restraints, refer to page 78.'yAirbags, refer to page 130.
Front
seats
Safety
information WARNING
Seat adjustments while driving can lead
to unexpected movements of the seat. Vehicle
control could be lost. There is a risk of an accij
dent. Only adjust the seat on the driver's side
when the vehicle is stationary.'

6Forward/backward, height, seat tilt7Thigh support
Forward/backward
Push switch forward or backward.
Height
Push switch up or down. Seat
tilt
Move switch up or down.
Backrest
tilt
Move switch forward or backward.Thigh
support
Multifunctional
seat
Push switch forward or backward.
Sport
seat
Pull the lever at the front of the seat and adjust the thigh support.
Lumbar
support The curvature of the seat backrest can be adj
justed in a way that it supports the lumbar rej
Seite 74ControlsSettings74
Online Edition for Part no. 01402985049 - X/17

gion of the spine. The lower back and thespine are supported for upright posture.'yPress the front/rear section
of the button:
The curvature is increased/
decreased.'yPress the upper/lower secj
tion of the button:
The curvature is shifted up/ down.
Backrest
width
Concept
Adjusting the backrest width may improve latj
eral support.
General
information You can change the backrest width by adjustj
ing the side wings of the backrest.
Settings
'yPress the front section of
the button:
The backrest width dej
creases.'yPress the rear section of the
button:
The backrest width inj
creases.
Upper
backrest
Concept
The upper backrest supports the back in the
shoulder area. A correct setting leads to a rej laxed seating position and reduces strain onthe shoulder muscles.
General
information
If the driver's door is opened when the ignition is switched off, the upper backrest moves into
the standard position.
Settings
Press the button on the respective side.
Front
seat
heating
Overview
Seat heating
Switching
on Press button once for each temperajture level.
The maximum temperature is reached when three LEDs are lit.
If the trip is continued within approx. 15 mij
nutes after a stop, seat heating is activated auj
tomatically with the temperature selected last.
Seite 75SettingsControls75
Online Edition for Part no. 01402985049 - X/17

Switching
offPress and hold the button, until the
LEDs go out.
Seat
heating
distribution The heating action in the seat cushion and
backrest can be distributed in different ways.
Via iDrive:1."My Vehicle"2."Vehicle settings"3."Climate functions"4."Seat heating distribution"5.Select desired seat.6.Turn the Controller to set the seat heating
distribution.
Active
seat
ventilation,
front
Concept
The seat cushion and backrest surfaces are cooled by means of integrated fans.
The ventilation cools the seat, for instance if the car's interior is overheated or for continujous cooling at high temperatures.
Overview
Active seat ventilation
Switching
on Press button once for each ventilation
level.
The highest level is active when three LEDs
are lit.
The ventilation switches back by one level afj ter a short time.
Switching
off Press and hold the button, until the
LEDs go out.
Rear
seats Second
row
of
seats
Safety
information WARNING
There is a risk of jamming when folding
down the center armrest in the rear. There is a risk of injury. Make sure that the area of movejment of the center armrest is clear during foldjing down.'

If the trip is continued within approx. 15 mij
nutes after a stop, seat heating is activated auj
tomatically with the temperature selected last.
Switching
off Press and hold the button, until the
LEDs go out.
Safety
belts Number
of
safety
belts
and
safety
belt
buckles
The vehicle is fitted with five safety belts to enjsure occupant safety. However, they can onlyoffer protection when adjusted correctly.
The two outer safety belt buckles of the rear
seat are intended for the persons sitting on the
left and right.
The center safety belt buckle of the rear seat is
intended for the person sitting in the middle.
General
information Always make sure that safety belts are being
worn by all occupants before driving off. Alj
though airbags enhance safety by providing
added protection, they are not a substitute for safety belts.
The upper shoulder strap's anchorage point
will be correct for adult seat occupants of evj ery build if the seat is correctly adjusted.
Safety
information WARNING
Use of a safety belt to buckle more than
one person will potentially defeat the ability of the safety belt to serve its protective funcjtion.There is a risk of injuries or danger to life.
Do not allow more than one person to wear a single safety belt. Infants and children are not
allowed on an occupant's lap, but must be
transported and secured in designated child restraint systems.'

'yDo not rub the safety belt against sharpedges, or guide it or jam it in across hard or
fragile objects.'yAvoid thick clothing.'yRe-tighten the safety belt frequently upj
ward around your upper body.
Buckling
the
safety
belt
1.Slowly guide the safety belt out of the holder when fastening it.2.Insert the tongue plate into the safety belt
buckle. The safety belt buckle must enj
gage audibly.
To ease accessibility to the safety belt buckle,
an adjustable slider is available on the belt to help position the buckle when not in use.
When the safety belt is buckled, the belt strap
is automatically tightened once after the vehij
cle drove off.
Unbuckling
the
safety
belt
1.Hold the safety belt firmly.2.Press the red button in the belt buckle.3.Guide the safety belt back into its roll-upmechanism.
Safety
belt
reminder
for
driver's
and
passenger's
seat
Display
in
the
instrument
cluster The indicator light lights up and a sigjnal sounds. Make sure that the safety
belts are positioned correctly. The
safety belt reminder can also be activated if
objects are placed on the front passenger seat.
Safety
mode
In critical situations, for instance during an
emergency stop, the front safety belts tighten automatically.
If the situation passes without an accident ocj
curring, the belt tension relaxes.
If the belt tension does not loosen automatij cally, stop the vehicle and unbuckle the safetybelt using the red button in the buckle. Fasten
the safety belt before continuing on your trip.
Front
head
restraints
Safety
information WARNING
A missing protective effect due to rej
moved or not correctly adjusted head rej
straints can cause injuries in the head and neck area. There is a risk of injury.'yBefore driving, install the removed head rej
straints on the occupied seats.'yAdjust the head restraint so its center supj ports the back of the head at as close to
eye level as possible.'yAdjust the distance so that the head rej straint is as close as possible to the back of
the head. Adjust the distance via the backj rest tilt as needed.'

'yDo not use seat or head restraint covers.'yDo not hang objects, for instance clothes
hangers, directly on the head restraint.'yOnly use accessories that have been dej termined to be safe for attachment to a
head restraint.'yDo not use any accessories, for instance
pillows, while driving.'

'yDo not hang objects, for instance clothes
hangers, directly on the head restraint.'yOnly use accessories that have been dej termined to be safe for attachment to a
head restraint.'yDo not use any accessories, for instance
pillows, while driving.'