BMW X6 2017 Owners Manual

The parking assistant failed. Have the system
checked by a dealerss service center or anj
other qualified service center or repair shop.Seite 171Driving
comfortControls171
Online Edition for Part no. 01 40 2 915 604 - X/16

Climate
controlVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., dueto the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Automatic
climate
control
1Air distribution, left2Temperature, left3AUTO program, left4Air flow, AUTO intensity, left, residual heat5Remove ice and condensation6Maximum cooling7Display8Air flow, AUTO intensity, right9AUTO program, right10Temperature, right11Air distribution, right12Seat heating, right\_ 5513Active seat ventilation, right\_ 5614Automatic recirculated-air control/recircuj
lated-air mode15Air conditioning16Rear window defroster17SYNC program18Active seat ventilation, left\_ 5619Seat heating, left\_55Seite 172ControlsClimate
control172
Online Edition for Part no. 01 40 2 915 604 - X/16

Climate
control
functions
in
detail
Switching
the
system
on/off
Switching
on
Press any button except for the following:'yRear window defroster.'yLeft side of air flow button.'ySeat heating.'ySeat ventilation.'yIf necessary, SYNC program.
Switching
off
'yComplete system: Press and hold the left button onthe driver's side until the control
panel switches off.'yOn the front passenger side:
Press and hold the left button onthe front passenger side.
Temperature
Concept
The automatic climate control achieves the set
temperature as quickly as possible, if needed,
by using the maximum cooling or heating caj
pacity, and then keeps it constant.
Settings Turn the ring to set the desired
temperature.
Do not rapidly switch between different temj
perature settings. Otherwise, the automatic clij
mate control will not have sufficient time to adj
just the set temperature.
Air
conditioning
Concept
The air in the vehicle's interior will be cooled and dehumidified and, depending on the temj
perature setting, warmed again.
The vehicle's interior can only be cooled with
the engine running.
Switching
on/off Press button.
Air conditioning is switched on or off.
Depending on the weather, the windshield and
side windows may fog up briefly when the enj
gine is started.
The cooling function is switched on automatij
cally with the AUTO program.
When using the automatic climate control,
condensation water, refer to page 198, develj
ops and drains underneath the vehicle. This is
normal.
Maximum
cooling Concept
The system is set to the lowest temperature,
optimum air flow and recirculated-air mode.
General
information
The function is available above an external temperature of approx. 32 

AUTO
program
Concept
Depending on the selected temperature, the
intensity of the AUTO program, and outside inj fluences, the air is directed to the windshield,side windows, upper body, and into the floor
area.
Switching
on/off Press button.
Air flow, air distribution and temperaj
ture are controlled automatically.
The cooling function, refer to page 173, is
switched on automatically with the AUTO proj gram.
At the same time, a condensation sensor conj
trols the program so as to prevent window
condensation as much as possible.
Intensity
With the AUTO program activated, the autoj
matic intensity control can be changed.
Press the left or right side of the butj
ton: decrease or increase intensity.
The selected intensity is shown on the display
of the automatic climate control.
Automatic
recirculated-air
control/recirculated-air
mode
Concept
The automatic recirculated-air control AUC detects odors or pollutants in the outside air.The outside air supply is shut off and the intej
rior air is recirculated.
General
information
If the system is activated, a sensor detects polj
lutants in the outside air and controls the shut-
off automatically.If the system is deactivated, outside air continj uously flows into the vehicle's interior.
With constant recirculated-air mode, the air
quality in the vehicle's interior deteriorates and the fogging of the windows increases.
Switching
on/off Press button repeatedly to select an
operating mode:'yLEDs off: outside air flows in continuously.'yLeft LED on, automatic recirculated-air
control: a sensor detects pollutants in the
outside air and shuts off automatically.'yRight LED on, recirculated-air mode: the
supply of outside air into the vehicle is perj manently blocked.
If the windows are fogged over, switch off the
recirculated-air mode and press the AUTO
button on the driver's side to utilize the conj densation sensor. Make sure that air can flow
to the windshield.
Controlling
the
air
flow
manually Concept
The air flow for climate control can be adjusted manually.
General
information
To manually adjust air flow turn off AUTO proj
gram first.
Operation Press the left or right side of the butj
ton: decrease or increase air flow.
The selected air flow is shown on the display of the automatic climate control.
The air flow of the automatic climate control
may be reduced automatically to save battery power.
Seite 174ControlsClimate
control174
Online Edition for Part no. 01 40 2 915 604 - X/16

Controlling
the
air
distribution
manually
Concept
The air distribution for climate control can be
adjusted manually.
Operation Press button repeatedly to select a
program:'yUpper body region.'yUpper body region and floor area.'yFloor area.'yWindows and floor area.'yWindows, upper body region, and floor
area.'yWindows: driver's side only.'yWindows and upper body region.
If the windows are fogged over, press the AUTO button on the driver's side to utilize the
condensation sensor.
SYNC
program
Concept
The system enables the transfer of current
settings on the driver's side for temperature, air flow, air distribution, and the AUTO proj
gram to the front passenger side and to the left and right rear.
Switching
on/off The program is also switched off if thesettings on the front passenger side or
in the rear are changed.
Residual
heat
The heat stored in the engine is used to heat
the interior. This is possible up to 15 minutes after switching off the engine.
Functional
requirement'yWarm engine.'yThe battery is sufficiently charged.'yExternal temperature below 77 

AUTO button to utilize the condensation senj
sor.
Rear
window
defroster Press button. The LED lights up.The rear window defroster switches
off automatically after a certain period of time.
Microfilter/activated-charcoal
filter
The microfilter removes dust and pollen from the incoming air.
The activated-charcoal filter removes gaseous pollutants from the outside air that enters the
vehicle.
Have this combined filter changed during vehij
cle maintenance, refer to page 241.
Ventilation Front
ventilation'yThumbwheels to vary the ventilation temjperature in the upper body region, arrow 1.
Toward blue: colder.
Toward red: warmer.
This does not change the set interior temj perature for the driver and front passenger.'yLever for changing the air flow direction,
arrow 2.'yThumbwheels for opening and closing the
vents continuously, arrows 3.Settings'yVentilation for cooling:
Direct vent in your direction when vehicle's interior is too hot.'yDraft-free ventilation:
Adjust the vent to let the air flow past you.
Ventilation
in
rear,
center
'yThumbwheels to vary the temperature, arj
row 1.
Toward blue: colder.
Toward red: warmer.'yLever for changing the air flow direction,
arrow 2.'yThumbwheels for continuous opening and closing of the vents, arrow 3.Seite 176ControlsClimate
control176
Online Edition for Part no. 01 40 2 915 604 - X/16

Rear
automatic
climate
control
Overview1Temperature2AUTO program3Air distribution settings4Air flow, AUTO intensity5Display6Maximum cooling7Seat heating\_ 56
Switching
the
rear
automatic
climate
control
on/off
1."Settings"2."Climate"3."Rear climate"
The rear automatic climate control is not opj erational if the automatic climate control is
switched off or if the function for defrosting or
defogging the windows is active.
Switching
the
system
on/off
Switching
on Press any button except for the following:
'yLeft side of air flow button.'ySeat heating.
Switching
off
Press and hold the left button.
Temperature Turn the ring to set the desired
temperature.
The automatic climate control achieves this
temperature as quickly as possible, if needed,
by using the maximum cooling or heating caj
pacity, and then keeps it constant.
Do not rapidly switch between different temj
perature settings. The automatic climate conj
trol will not have sufficient time to adjust the
set temperature.
Maximum
cooling
Concept
The system is set to the lowest temperature,
maximum air flow and recirculated-air mode.
General
information Air is cooled as quickly as possible:'yAbove an external temperature of approx.32 

Switching
on/offPress button.
Air flow, air distribution, and temperaj
ture are controlled automatically:
The cooling function is switched on automatij cally with the AUTO program.
Intensity With the AUTO program activated, the autoj
matic intensity control can be changed:
Press the left or right side of the butj
ton: decrease or increase intensity.
The selected intensity is shown on the display
of the automatic climate control.
Controlling
the
air
flow
manually
Concept
The air flow for climate control can be adjusted
manually.
General
information
To manually adjust air flow turn off AUTO proj
gram first.
Operation Press the left or right side of the butj
ton: decrease or increase air flow.
The selected air flow is shown on the display of
the automatic climate control.
Controlling
the
air
distribution
manually
Concept
The air distribution for climate control can be
adjusted manually.
Operation Press button repeatedly to select a
program:'yUpper body region.'yUpper body region and floor area.'yFloor area.
Parked-vehicle
ventilation
Concept
The parked-vehicle ventilation ventilates the
vehicle interior and lowers its temperature, if needed.
General
information The system can be switched on and off dij
rectly or by using two preset departure times.
The activation time is automatically deterjmined based on the temperature. The systempromptly switches on before the selected dej
parture time.
Operation can be performed via iDrive.
Functional
requirements
Parked-car
ventilation
'yWhen the departure time is preselected:
depends on internal, external and set temj
perature.'yDirect operation: any external temperature.'yBattery is sufficiently charged.
If parked-car ventilation is switched on, the vehicle battery will be discharged. Thus,
limit the maximum activation time to save
the vehicle battery. The system will be available again after engine starting and/ora short trip.'yMake sure that the vehicle's date and time
are set correctly.
Open the vents to allow air to flow out.
Switching
on/off
directly
On the Control Display:
1."Settings"Seite 178ControlsClimate
control178
Online Edition for Part no. 01 40 2 915 604 - X/16

2."Climate"3."Activate now"
The symbol on the automatic climate conj
trol flashes if the system is switched on.
The system continues to run for some time afj
ter being switched off.
Setting
the
departure
time
On the Control Display:
1."Settings"2."Climate"3.Select the departure time.
Turn the controller until the desired deparj
ture time field has been selected and press controller.4.Set the time.
Turn the controller until the desired time is
set and press the controller.
Activating
the
departure
time
On the Control Display:
1."Settings"2.If necessary, "Climate"3.Activating the desired departure time:
"for departure at"
The symbol on the automatic climate conj
trol lights up when the departure time is actij
vated.
The symbol on the automatic climate conj
trol flashes when the system has been switched on.
The system will only be switched on within the
next 24 hours. After that, it needs to be reactij vated.
Seite 179Climate
controlControls179
Online Edition for Part no. 01 40 2 915 604 - X/16

Interior
equipmentVehicle
features
and
optionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Universal
Integrated
Remote
Control
Concept
The integrated Universal Remote Control in
the interior mirror can operate up to 3 funcj
tions of remote-controlled systems, such as
garage door drives or lighting systems. The Universal Integrated Remote Control replaces
up to 3 different hand-held transmitters. To
operate the remote control, the buttons on the
interior mirror must be programmed with the
desired functions. The hand-held transmitter
for the particular system is required in order to
program the remote control.
Before selling the vehicle, delete the stored
functions for the sake of security.
Safety
information WARNING
Body parts can be jammed when operatj
ing remote-controlled systems, e.g., the gaj
rage door, using the integrated universal rej mote control. There is a risk of injury or risk ofproperty damage. Make sure that the area ofmovement of the respective system is clear
during programming and operation. Also followthe safety instructions of the hand-held transj
mitter.'