BMW X6 2018 Owners Manual

style to traffic conditions. Watch traffic closelyand actively intervene where appropriate.'

Display
on
the
Control
Display
System
activated/deactivatedSymbolMeaning Gray: the system is not available.
White: the system is available but
not activated. The system is activated.
Parking
space
search
and
system
status
'yColored symbols, see arrows, on the side
of the vehicle image; the parking assistant
is activated and the parking space search is active.'yControl Display shows suitable parking
spaces at the edge of the road next to the vehicle symbol. When the parking assistant
is active, suitable parking spaces are highj
lighted.'yThe parking procedure is acj
tive. Steering control has
been taken over by system.'yParking space search is always active
whenever the vehicle is moving forward
slow and straight, even if the system is dej
activated. When the system is deactivated, the displays on the Control Display areshown in gray.Parking
using
the
parking
assistant
Parking1. Press the park assistance button or
shift into reverse gear to switch on the parking assistant, refer to page 171. Actij
vate the parking assistant, if needed.
Parking assistant is activated.
2.Pass the row of parked vehicles at a speed
of up to approx. 22 mph/35 km/h and at a
distance of maximum 5 ft/1.5 m.
The status of the parking space search and
possible parking spaces are displayed on the Control Display, refer to page 172.3.Follow the instructions on the Control Disj
play.
Press and hold the park assistance button
for the duration of the parking procedure.
At the end of the parking procedure, the P selector lever position is set.
The end of the parking procedure is indij
cated on the Control Display.4.Adjust the parking position yourself, if
needed.
Interrupting
manually
The parking assistant can be interrupted at any time:
'yPress park assistance button.'y "Parking Assistant" Select the symbol
on the Control Display.
Interrupting
automatically
The system is interrupted automatically in thefollowing situations:
'yIf the driver grasps the steering wheel ortakes over steering.'yPossibly on snow-covered or slippery roadsurfaces.Seite 172ControlsDriving
comfort172
Online Edition for Part no. 01402981185 - VI/17

'yWhen there are obstacles that are hard toovercome, such as curbs.'yWhen there are obstacles that suddenly
appear.'yIf the PDC Park Distance Control displays
clearances that are too small.'yIf a maximum number of parking attempts
or the time taken for parking is exceeded.'yWhen switching to another function on the
Control Display.'yWhen the park assistance button is rej
leased.'yIf the tailgate is open.'yIf doors are open.'yWhen setting the parking brake.'yDuring acceleration.'yWhen braking.'yWhen unfastening the driver's safety belt.
A Check Control message is displayed.
Resuming An interrupted parking procedure can be conjtinued, if needed.
Reactivate the parking assistant, refer to page 171, and follow the instructions on the
Control Display.
Switching
off
The system can be switched off as follows:
'yPress park assistance button.
System
limits
Safety
information WARNING
The system can react not at all, too late,
incorrectly, or without justification due to the system limits. There is a risk of accidents or
risk of damage to property. Follow the informaj
tion regarding the system limits and actively
intervene, if needed.'

'yWith objects with a fine surface structuresuch as fences.'yFor objects with porous surfaces.'yIf cargo protrudes.'yLow objects already displayed, for instance
curbs, can move into the blind area of the sensors before or after a continuous tone
sounds.
Parking spaces that are not suitable may be
detected or suitable parking spaces may not be detected at all.
Malfunction
A Check Control message is displayed.
The parking assistant failed. Have the system
checked by a dealerss service center or anj
other qualified service center or repair shop.
Seite 174ControlsDriving
comfort174
Online Edition for Part no. 01402981185 - VI/17

Climate
controlVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.Interior
air
quality
The air quality inside the vehicle is improved
by an emissions-tested interior, a microfilter, and a climate-control system for regulatingtemperature, air flow, and recirculated-airmode.
In addition there are other functions which dej
pend on the vehicle's equipment, for instance microfilter/activated-charcoal filter, automaticclimate control with automatic recirculated-air
control AUC, and parked-car ventilation.
Automatic
climate
control
1Air distribution, left2Temperature, left3AUTO program, left4Air flow, AUTO intensity, left, residual heat5Remove ice and condensation6Maximum cooling7Display8Air flow, AUTO intensity, right9AUTO program, right10Temperature, right11Air distribution, right12Seat heating, right\_ 57Seite 175Climate
controlControls175
Online Edition for Part no. 01402981185 - VI/17

13Active seat ventilation, right\_5814Automatic recirculated-air control/recircuj
lated-air mode15Air conditioning16Rear window defroster17SYNC program18Active seat ventilation, left\_ 5819Seat heating, left\_57Climate
control
functions
in
detail
Switching
the
system
on/off
Switching
on
Press any button except for the following:'yRear window defroster.'yLeft side of air flow button.'ySeat heating.'ySeat ventilation.'yIf necessary, SYNC program.
Switching
off
'yComplete system: Press and hold the left button onthe driver's side until the control
panel switches off.'yOn the front passenger side:
Press and hold the left button onthe front passenger side.
Temperature
Concept
The automatic climate control achieves the set
temperature as quickly as possible, if needed,
by using the maximum cooling or heating caj
pacity, and then keeps it constant.
Settings Turn the ring to set the desired
temperature.
Do not rapidly switch between different temj
perature settings. Otherwise, the automatic clij mate control will not have sufficient time to adj
just the set temperature.
Air
conditioning
Concept
The air in the car's interior will be cooled and dehumidified and, depending on the temperaj
ture setting, warmed again.
The car's interior can only be cooled with the
engine running.
Switching
on/off Press button.
Air conditioning is switched on or off.
Depending on the weather, the windshield and
side windows may fog up briefly when the enj
gine is started.
The air conditioning is switched on automatij cally with the AUTO program.
When using the automatic climate control,
condensation water, refer to page 203, develj
ops and drains underneath the vehicle. This is
normal.
Maximum
coolingConcept
The system is set to the lowest temperature,
optimum air flow and recirculated-air mode.
General
information
The function is available above an external temperature of approx. 32 

Switching
on/offPress button.
Air flows out of the vents to the upper body rej
gion. The vents need to be open for this.
The air flow can be adjusted with the air flow
active.
AUTO
program
Concept
Air flow, air distribution and temperature are
controlled automatically.
Switching
on/off Press button.
Depending on the selected temperaj
ture, the intensity of the AUTO program, and outside influences, the air is directed to thewindshield, side windows, upper body, and
into the floor area.
The air conditioning, refer to page 176, is
switched on automatically with the AUTO proj gram.
At the same time, a condensation sensor conj trols the program so as to prevent window
condensation as much as possible.
Intensity
With the AUTO program switched on, the inj tensity can be set. This changes the automaticcontrol for the air flow and air distribution.
Press the left or right side of the butj
ton: decrease or increase intensity.
The selected intensity is shown on the display
of the automatic climate control.Automatic
recirculated-air
control/ recirculated-air
mode
Concept
The automatic recirculated-air control AUC
detects odors or pollutants in the outside air. The outside air supply is shut off and the intej
rior air is recirculated.
General
information
If the system is activated, a sensor detects polj lutants in the outside air and controls the shut-
off automatically.
If the system is deactivated, outside air continj
uously flows into the car's interior.
With constant recirculated-air mode, the air
quality in the car's interior deteriorates and the
fogging of the windows increases.
Switching
on/off Press button repeatedly to select an
operating mode:'yLEDs off: outside air flows in continuously.'yLeft LED on, automatic recirculated-air
control: a sensor detects pollutants in the
outside air and shuts off automatically.'yRight LED on, recirculated-air mode: the
supply of outside air into the vehicle is perj manently blocked.
If the windows are fogged over, switch off the
recirculated-air mode and press the AUTO
button on the driver's side to utilize the conj densation sensor. Make sure that air can flow
to the windshield.
Controlling
the
air
flow
manually Concept
The air flow for climate control can be adjusted manually.
Seite 177Climate
controlControls177
Online Edition for Part no. 01402981185 - VI/17

General
information
To manually adjust air flow switch off AUTO program first.
Operation Press the left or right side of the butj
ton: decrease or increase air flow.
The selected air flow is shown on the display of
the automatic climate control.
The air flow of the automatic climate control
may be reduced automatically to save battery
power.
Controlling
the
air
distribution
manually
Concept
The air distribution for climate control can be
adjusted manually.
Operation Press button repeatedly to select a
program:'yUpper body region.'yUpper body region and floor area.'yFloor area.'yWindows and floor area.'yWindows, upper body region, and floor
area.'yWindows: driver's side only.'yWindows and upper body region.
If the windows are fogged over, press the AUTO button on the driver's side to utilize the
condensation sensor.
SYNC
program
Concept
The system enables the transfer of current
settings on the driver's side for temperature, air flow, air distribution, and the AUTO proj
gram to the front passenger side and to the leftand right rear.
Switching
on/off The program is also switched off if thesettings on the front passenger side or
in the rear are changed.
Residual
heat
Concept
The heat stored in the engine is used to heat
the car's interior. This is possible up to 15 mij
nutes after switching off the engine.
Functional
requirement'yWarm engine.'yThe battery is sufficiently charged.'yExternal temperature below 77 

Defrosting
windows
and
removing
condensation
Concept
Ice and condensation are quickly removed from the windshield and the front side winjdows.
Switching
on/off Press button.
The LED is illuminated with the sysj
tem switched on.
For this purpose, point the side vents towards the side windows as needed.
The air flow can be adjusted with the air flow
active.
If the windows are fogged over, you can also switch on the air conditioning or press the
AUTO button to utilize the condensation senj
sor.
Rear
window
defroster Press button. The LED lights up.The rear window defroster switches
off automatically after a certain period of time.
Microfilter/activated-charcoal
filter
The microfilter removes dust and pollen from
the incoming air.
The activated-charcoal filter removes gaseous
pollutants from the outside air that enters the
vehicle.
Have this combined filter changed during vehij
cle maintenance, refer to page 246.Ventilation
Front
ventilation'yThumbwheels to vary the ventilation temjperature in the upper body region, arrow 1.
Toward blue: colder.
Toward red: warmer.
This does not change the set interior temj perature for the driver and front passenger.'yLever for changing the air flow direction,
arrow 2.'yThumbwheels for opening and closing the
vents continuously, arrows 3.
Settings
'yVentilation for cooling:
Direct vent in your direction when car's inj
terior is too hot.'yDraft-free ventilation:
Adjust the vent to let the air flow past you.
Ventilation
in
rear,
center
'yThumbwheels to vary the temperature, arj
row 1.Seite 179Climate
controlControls179
Online Edition for Part no. 01402981185 - VI/17

Toward blue: colder.
Toward red: warmer.'yLever for changing the air flow direction,
arrow 2.'yThumbwheels for continuous opening and closing of the vents, arrow 3.
Rear
automatic
climate
control
Overview
1Temperature2AUTO program3Air distribution settings4Air flow, AUTO intensity5Display6Maximum cooling7Seat heating\_ 58
Switching
the
rear
automatic
climate
control
on/off
1."Settings"2."Climate"3."Rear climate"
The rear automatic climate control is not opj erational if the automatic climate control is
switched off or if the function for defrosting or
defogging the windows is active.
Switching
the
system
on/off
Switching
on Press any button except for the following:'yLeft side of air flow button.'ySeat heating.
Switching
off
Press and hold the left button.
Temperature Turn the ring to set the desired
temperature.
The automatic climate control achieves this
temperature as quickly as possible, if needed,
by using the maximum cooling or heating caj
pacity, and then keeps it constant.
Do not rapidly switch between different temj
perature settings. The automatic climate conj
trol will not have sufficient time to adjust the set temperature.
Maximum
cooling
Concept
The system is set to the lowest temperature,
maximum air flow and recirculated-air mode.
General
information
Air is cooled as quickly as possible:
'yAbove an external temperature of approx. 32