BMW X6 M 2018 Manual PDF

accident, the rear backrest can fold forward.
There is a risk of injuries or danger to life. Make sure that the rear backrests are locked.'

5.Tighten the retaining strap by pulling itdown.6.Middle seat: lower and lock head restraints
as needed.
Locking
the
doors
and
windows
in
the
rear
Rear
doors
Push the locking lever on the rear doors up.The door can now be opened from the outsideonly.
Safety
switch
for
the
rear Press button on the driver's door.
The LED lights up if the safety funcj
tion is switched on.
This locks various functions so that they canj
not be operated from the rear.
Seite 72ControlsTransporting
children
safely72
Online Edition for Part no. 01402981778 - VI/17

DrivingVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Start/Stop
buttonConcept Pressing the Start/Stop button
switches the ignition on or off
and starts the engine.
The engine starts with the brake
pedal pressed when you press
the Start/Stop button.
Ignition
on Press the Start/Stop button, and do not press
on the brake pedal at the same time.
All vehicle systems are ready for operation.
Most of the indicator/warning lights in the inj
strument cluster light up for a varied length of
time.
To save battery power when the engine is off,
switch off the ignition and any unnecessary
electronic systems/power consumers.
Ignition
off
Press the Start/Stop button again without
stepping on the brake.
All indicator lights in the instrument cluster go
out.To save battery power when the engine is off,
switch off the ignition and any unnecessary
electronic systems/power consumers.
Safety
measures
When switching off the ignition, the transmisj
sion position P is selected automatically if the
selector lever position D or R is selected.
The ignition is switched off automatically in the
following situations while the vehicle is stationj
ary and the engine is off:'yWhen locking the vehicle, and when the
low beams are switched on.'yShortly before the battery is discharged completely, so that the engine can still be
started.'yWhen opening or closing the driver door, if
the driver's safety belt is unbuckled and
the low beams are switched off.'yWhile the driver's safety belt is unbuckled with driver's door open and low beams off.'yWhen the front doors are opened if there is
no other person sitting in the front seats.
The low beams switch to parking lights after
some minutes of no use.
Radio-ready
state
General
information
In the radio-ready state, certain power conj sumers remain ready for operation.
ActivatingWith the engine running, press the Start/Stop
button.
If the engine is not running and the ignition is switched on: the system automatically actijvates radio-ready state when the door is
opened if the lights are switched off or the dayj
time running lights are switched on.
Seite 73DrivingControls73
Online Edition for Part no. 01402981778 - VI/17

The radio-ready state remains active if, for inj
stance the ignition is automatically switched
off for the following reasons:'yOpening or closing the driver's door.'yUnfastening of the driver's safety belt.'yWhen automatically switching from low
beams to parking lights.
Switching
off
automatically
The radio-ready state is switched off automatijcally in the following situations:
'yIf the driver's or front passenger door isopened when exiting the vehicle, with the
engine switched off manually.'yIf the ignition is switched off manually with
the Start/Stop button.'yAfter approx. 8 minutes.'yWhen the vehicle is locked using the cenj
tral locking system.'yShortly before the battery is discharged completely, so that the engine can still be
started.
Starting
the
engine
Safety
information DANGER
If the exhaust pipe is blocked or ventilaj
tion is insufficient, harmful exhaust gases can enter into the vehicle. The exhaust gases conjtain pollutants which are colorless and odorj
less. In enclosed areas, exhaust gases can also
accumulate outside of the vehicle. There is
danger to life. Keep the exhaust pipe free and ensure sufficient ventilation.'

There is a risk of accidents or injuries. Do notleave children or animals unattended in the vej
hicle. Take the remote control with you when exiting and lock the vehicle.'

'yThe car's interior has not yet been heated
or cooled to the required level.'yThe engine is not yet at operating temperj ature.'yThe wheels are at a sharp angle or the
steering wheel is being turned.'yAfter driving in reverse.'yWhere there is a risk of window condensaj tion when the automatic climate control isswitched on.'yVehicle battery is heavily discharged.'yAt higher elevations.'yThe hood is unlocked.'yHDC Hill Descent Control is activated.'yThe parking assistant is activated.'yStop-and-go traffic.'yUse of fuel with high ethanol content.
Starting
the
engine
The engine starts automatically under the foljlowing conditions:
'yWhen Automatic Hold is activated: pressthe accelerator pedal.
After the engine starts, accelerate as usual.
Safety
mode
After the engine switches off automatically, it will not start again automatically if any one of the following conditions are met:
'yThe driver's safety belt is unbuckled and
the driver's door is open.'yThe hood was unlocked.
Some indicator lights light up for a varied length of time.
The engine can only be started via the Start/
Stop button.
Functional
limitations
Even if driving off was not intended, the deactij vated engine starts up automatically in the folj
lowing situations:
'yExcessive warming of the car's interior when the air conditioning is switched on.'yThe steering wheel is turned.'yChange from selector lever position D to N,
R or D/S.'yThe accelerator and the brake are pressed at the same time.'yWhere there is a risk of window condensajtion when the automatic climate control isswitched on.'yVehicle battery is heavily discharged.'yExcessive cooling of the car's interior when
the heating is switched on.
Preventing
automatic
engine
stop
Concept
To make it possible to drive off very quickly, such as at an intersection, the automatic enj gine stop can be actively prevented.
Preventing
an
engine
stop
using
the
brake
pedal
The engine stop can be actively prevented
within one second after the vehicle comes to a
standstill:
'yImmediately after the vehicle comes to a standstill, briefly press the brake pedalforcefully.'yThen press the brake pedal with normal
braking force.Seite 76ControlsDriving76
Online Edition for Part no. 01402981778 - VI/17

Activating/deactivating
the
system
manually
Using
the
button
Press button.
'yLED comes on: auto Start/Stop function is deactivated.
The engine is started during an automatic engine stop.
The engine can only be stopped or started
via the Start/Stop button.'yLED goes out: auto Start/Stop function is activated.
Switching
off
the
vehicle
during
an
automatic
engine
stop
During an automatic engine stop, the vehicle
can be switched off permanently, for instance
when leaving it.
1.Press the Start/Stop button. The ignition is switched off. The Auto Start/Stop functionis deactivated.
Selector lever position P is engaged autoj
matically.2.Set the parking brake.
Engine start as usual via Start/Stop button.
Automatic
deactivation
In certain situations, the Auto Start/Stop funcj
tion is deactivated automatically for safety reaj sons, e.g., if no driver is detected.
Malfunction
The Auto Start/Stop function no longer switches off the engine automatically. A CheckControl message is displayed. It is possible to
continue driving. Have the system checked by a dealerss service center or another qualified
service center or repair shop.
Parking
brake
Concept
The parking brake is used to prevent the vehij
cle from rolling when it is parked.
Safety
information WARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an acj cident. Before exiting, secure the vehicle
against rolling.
In order to ensure that the vehicle is secured against rolling away, observe the following:'ySet the parking brake.'yOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'yOn uphill grades or on a downhill slope,
also secure the vehicle, e.g., with a wheel chock.'

There is a risk of accidents or injuries. Do notleave children or animals unattended in the vej
hicle. Take the remote control with you when exiting and lock the vehicle.'

The indicator light switches from green
to red and the letters AUTO H go out.
Safety
information WARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an acj
cident. Before exiting, secure the vehicle
against rolling.
In order to ensure that the vehicle is secured against rolling away, observe the following:'ySet the parking brake.'yOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'yOn uphill grades or on a downhill slope,
also secure the vehicle, e.g., with a wheel chock.'

Step on the accelerator pedal to drive off.The brake is released automatically.
The indicator light goes out.
Parking
The parking brake is automatically set if the
engine is switched off while the vehicle is bej
ing held by Automatic Hold.
The indicator light changes from green
to red.
The parking brake is not set if the enj
gine is switched off while the vehicle is coastj
ing to a halt. Automatic Hold is deactivated.
Automatic Hold remains activated during the
engine stop brought about by the Auto Start/ Stop function.
Malfunction
In the event of a failure or malfunction of the parking brake, secure the vehicle against rollj ing using a wheel chock, e.g., when leaving it.
After
a
power
failure
Putting
the
parking
brake
into
operation1.Switch on the ignition.2. Press the switch while stepping on
the brake pedal or transmission position P
is set.
It may take several seconds for the brake to be
put into operation. Any sounds associated with this are normal.
The indicator light in the instrument
cluster goes out as soon as the parking
brake is ready for operation.
Turn
signal,
high
beams,
headlight
flasher
Turn
signal
Turn
signal
in
exterior
mirror
When driving and during operation of the turn signals or hazard warning system, do not foldin the exterior mirrors, so that the signal lightson the exterior mirror are easy to see.
Using
turn
signals
Press the lever past the resistance point.
The lever returns into its starting position after
actuation. To switch off manually, slightly tap the lever to the resistance point.
Triple
turn
signal
activation Lightly tap the lever up or down.
The turn signal flashes three times.
The function can be activated or deactivated.
Using iDrive:
1."Settings"2."Lighting"3."Triple turn signal"
The setting is stored for the driver profile curj
rently used.
Signaling
briefly Press the lever to the resistance point and hold
it there for as long as you want the turn signal to flash.
Seite 80ControlsDriving80
Online Edition for Part no. 01402981778 - VI/17