engine BMW Z4M ROADSTER 2006 E85 Service and warranty information

Page 3 of 54

Table of Contents
Page
The BMW Maintenance Program - 2006 BMW M Coupe and Roadster . . .......... 1
Coverage ......................................................1
Maintenance Intervals ..............................................1
Exclusions from coverage ...........................................1
Maintenance Upgrade Option .........................................1
Maintenance Program . . ............................................ 2
Confirmation Stamp For 1200 Mile Service . . ............................. 3
Unscheduled Maintenance .......................................... 4
Special Note .................................................... 4
Engine Oil Service ................................................ 5
Engine Compartment ..............................................5
Inspection I . .................................................... 6
Undercarriage ...................................................6
Engine Compartment ..............................................6
Body/Electrical ...................................................7
Final Inspection ..................................................7
BMW Engine Oil Service stamps ......................................10
Emission Control Maintenance Schedule BMW M Coupe and Roadster . . . . . ..... 13
BatteryCare .................................................... 14
Corrosion Protection ............................................. 14
Restoring corrosion protection .......................................14
Underbody maintenance ...........................................14
Body Inspection ................................................. 15
Customer Assistance Information .................................... 21
Customer Assistance - Notification ................................... 21
BBB AUTO LINE ................................................. 22
California Residents ..............................................22
Special Programs ................................................ 24
BMW Import Processing Centers ..................................... 24
Owner’s Eligibility ................................................24
Getting Started .................................................24
Calling For Assistance .............................................25

Page 6 of 54

Maintenance Program
The BMW Maintenance Program has been
devised with the following objectives: to maxi-
mize vehicle safety, reliability, and resale value by
minimizing breakdowns resulting from wear, and
minimizing cost and inconvenience by comput-
ing maintenance intervals based upon the spe-
cific manner in which each individual vehicle is
driven.
Maintenance intervals on motor vehicles have
conventionally been specified based upon
accumulated mileage. However, the type of
driving conditions has a major influence on
routine maintenance requirements; distance
traveled is only one of the significant factors.
A vehicle driven for 50,000 miles of short trips
in the city with numerous cold starts, pro-
longed periods of idling, stop-and-go driving,
and high engine speeds during acceleration
requires more frequent maintenance intervals
than a vehicle driven for 50,000 miles for long
distances at low engine speeds primarily at
operating temperature.
The advanced technologies at BMW have led to
the development of the unique BMW service
interval indicator which computes the actual opti-
mum maintenance requirements based not only
upon the accumulated mileage, but taking into
account important factors such as engine cool-
ant temperatures, high or low engine speeds,
short or long trip driving, and number of vehicle
starts. The maintenance interval may therefore
be maximized with considerable savings to own-
ers of vehicles subjected to light duty.
The Service Interval Indicator consists of a
mileage reading, and the inscriptions “OIL SER-
VICE” and “INSPECTION”.
Whenever the ignition is switched on, the display
shows the next scheduled type of service and the
remaining distance until the service should be
performed. The distance is based on your driving
style. If the maintenance interval has been exceeded, a
“--” symbol reminds you of the urgent need for
servicing. In the interests of road safety and reli-
ability,
you should avoid driving your BMW
when the “--” symbol is showing, and have the
essential maintenance work performed without
delay.
After each maintenance is performed the service
indicator is reset in order to compute the next
service interval.
If the Service Interval Indicator displays an illogi-
cal reading, or if there is no display, consult a
BMW center.
If the speedometer, tachometer or coolant tem-
perature gauge should develop a fault, the ser-
vice interval indicator will probably cease to
operate correctly as well, since it depends on
correct speed, distance and temperature read-
ings. The fault must be located and rectified by a
BMW center.
A detailed list of all maintenance operations
included in each of the elements of the BMW
Maintenance Program is found on page s3-13.
These elements are as follows:
Quality Certification I will be performed by your
selling center and certified on the following page.
The performance of certain subsequent mainte-
nance elements, as required by the BMW New
Vehicle Limited Warranty, will be specified at
intervals computed by the BMW service interval
indicator as follows:
– Oil Service: Engine oil changed with the
engine at operating temperature.
Note: change oil at least once a year .
Your BMW is factory-equipped with a newly-
developed synthetic engine oil. At the time of
the printing of this booklet the only approved
engine oils are: Castrol TWS Motorsport SAE
10W-60 Synthetic, or Castrol Formula RS
10W-60 Synthetic (BMW part number 07 51 0
009 420).
2

Page 7 of 54

BMW recommends that you check engine oil
level whenever fuel is added to your vehicle.
– Inspection I: Major vehicle maintenance as specified in the following pages under Inspec-
tion I.
– Inspection II: Additional major vehicle mainte- nance as specified in the following pages under
Inspection II.
The following maintenance elements must be
performed at the mileage/time stated (time inter-
vals begin from the vehicle’s production date):
– Brake Fluid Service: Change brake fluid every two years.
– Oxygen Sensor Service: The oxygen sensor deteriorates strictly on a mileage basis and
must therefore be replaced every 100,000
miles to maximize vehicle fuel economy and
minimize exhaust pollution. The replacement of
the oxygen sensor is required under the terms
of the applicable BMW emission system war-
ranties.
– Spark Plug Service: Replace spark plugs at every Inspection 2.
The engine coolant has a lifetime rating and does
not need to be changed.
For your convenience, you may also wish to have
your BMW center perform any necessary opera-
tions to fulfill any state inspection requirements
in your area concurrent with the maintenance
elements specified above during other repairs.
Make sure that confirmation of maintenance
work is always entered in this Service and War-
ranty Information Statement. You may need this
for any warranty claims that become necessary,
and later on as evidence that your car has been
given the correct and regular maintenance that
justifies its resale or trade-in value.
BMW has applied the most modern technologi-
cal advances not only to the design and produc-
tion of your vehicle, but also to computing of the
optimum maintenance interval for your type of
operations and driving style. Your BMW center
has made a substantial investment in unique
BMW special service tools to enable his BMW
factory trained service technicians to perform
quality repairs on your BMW in minimal time. He/she looks forward to serving your every ser-
vice need and to help maximize your satisfaction
with your BMW, its longevity, and resale value.
Quality Certification I
For a detailed list of items inspected, refer to the
Quality Certification I form provided to the Owner
at time of delivery. A copy of the form is on file at
the selling BMW center.
Confirmation Stamp For 1200
Mile Service
The engine in your BMW M Coupe and Roadster
is a race-bred engine design which includes
increased power output and maximum engine
speeds compared to conventional BMW Z4
engines. The increased power output also affects
other major drivetrain components such as the
transmission and the rear axle differential. The
1200 Mile Service requires changing the oil in
the engine and both the transmission and the
differential.
3

Page 8 of 54

Unscheduled Maintenance
Only use fuels advertised to have adequate
detergency and low alcohol content. Use of fuels
with insufficient detergent and/or excess alcohol
can cause driveability problems that necessitate
cleaning intake valves and fuel injection valves,
and, when applicable, adjusting the engine idle.
We suggest having this work performed by your
authorized BMW center, perhaps while regular
maintenance is performed. Your BMW center can
also recommend a gasoline additive that will pro-
vide sufficient detergency. While this recom-
mended unscheduled maintenance is not
required in order to maintain the emission war-
ranty, cleaning of intake valves or, when applica-
ble, fuel injection valves, or adjustment of engine
idle, necessitated by use of inappropriate fuel, is
not covered by warranty because no defect in
material or workmanship or component failure is
involved.
Special Note
Maintenance items and schedules stated herein
reflect the combined recommendations for all
2006 BMW M Coupe and Roadster models are
subject to change. The most current mainte-
nance recommendations are available from your
authorized BMW center.
4

Page 9 of 54

1200 Mile Service
M Coupe, Roadster
Read out diagnostic system. •
Change oil and filter while engine is at normal operating temperature. Use only
Castrol TWS Motorsport SAE 10W-60 Synthetic Oil, BMW p/n 07 51 0 009 420. •
Replace transmission fluid. •
Replace differential oil. •
Check all warning/indicator lights, check control. •
Road test with check of brakes, suspension, steering, clutch/manual transmission. •
Engine Oil Service
Engine Compartment
M Coupe, Roadster
Change oil and oil filter while engine is at normal operating temperature. Use only
Castrol TWS Motorsport SAE 10W-60 Synthetic, or Castrol Formula RS 10-60
Synthetic oil; BMW p/n 07 51 0 009 420. •
Reset service interval indicator. •
Replace microfilter. •
Check overall thickness of front and rear disc brake pads using special tool. If
replacement is necessary: Examine brake disc surfaces. Clean brake pad contact
points in calipers. Grease wheel centering hubs. Check thickness of parking brake
linings only when replacing rear pads •
Check parking brake actuation. Adjust if necessary. •
5

Page 10 of 54

Inspection I
Only those items of inspection work which apply to your vehicle will be performed. This list is subject to
amendment.
Undercarriage
M Coupe, Roadster
Change oil and oil filter while engine is at normal operating temperature. Use only
Castrol TWS Motorsport SAE 10W-60 Synthetic, or Castrol Formula RS 10-60
Synthetic oil; BMW p/n 07 51 0 009 420. •
Check transmission for leaks. •
Check rear axle for leaks. •
Half-shafts: Check for leaks at flexible boots. •
Visually check fuel tank, lines and connections for leaks. •
Check condition, position, and mounting of exhaust system. Examine for leaks. •
Check steering for absence of play, condition of suspension track rods, front axle
joints, steering linkage and joint disc. •
Check overall thickness of front and rear disc brake pads using special tool. If
replacement is necessary: Examine brake disc surfaces. Clean brake pad contact
points in calipers. Grease wheel centering hubs. Check thickness of parking brake
linings only when replacing rear brake pads. Check brake system connections and
lines for leaks, damage and incorrect positioning. •
Check parking brake actuation. Adjust if necessary. •
Check all tire pressures. Correct if necessary. Check condition of tires (outer
surface [left/right]), tread wear and pattern; in case of uneven tread wear, readjust
wheel alignment if requested (invoice separately). •
Inspect entire body according to terms of rust performation limited warranty. (Must
be performed at least every two years). •
Engine Compartment
Read out diagnostic system.

Check engine cooling system/heater hose connections for leaks. Check coolant
level and antifreeze protection level. Add coolant if required. •
Check windshield washer fluid level and antifreeze protection. Fill up and/or
correct if required. •
Check air conditioner for operation. •
Replace microfilter (Note: reduce replacement interval in dusty operating
conditions). •
Reset service interval indicator. •
Check brake fluid level. Add fluid if needed •
6

Page 12 of 54

Inspection II
Includes all items listed under Inspection I, and the following checks and maintenance operations.
Engine Compartment M Coupe, Roadster
Replace air cleaner element. (Note: Reduce replacement interval in dusty
operating conditions). •
Replace spark plugs. •
Undercarriage
Replace transmission fluid. •
Replace differential oil. •
Brake Fluid Service
Replace brake fluid every 2 years (time interval begins from the vehicle’s
production date). •
Oxygen Sensor Service
Replace Oxygen Sensor every 100,000 miles.

M-Mobility System Service
Replace sealant cartridge every 4 years. •
8

Page 17 of 54

Emission Control Maintenance Schedule BMW M Coupe and Roadster
The maintenance schedule as shown is required
for the proper functioning of the emission control
systems for optimum vehicle performance and
fuel economy.
Abbreviations:
I - Inspect
R - Replace part(s) and/or fluid listed
Basic Engine
Engine oil ........................
Engine oil filter .....................
Fuel System
Air filter ..........................
Ignition System
Spark plugs .......................
Emission Control Components
Oxygen sensor .....................
BMW M Coupe,
Roadster
Oil Service
Inspection I
Oil Service
Inspection II
R
R R
R R
R R
R
R
R
Replace at intervals of 100,000 miles
Oxygen Sensor Service: The oxygen sensor deteriorates strictly on a mileage basis and must therefore
be replaced to maximize vehicle fuel economy and minimize exhaust pollution.
The mileage interval varies according to individual driving conditions and is determined by the service
interval indicator.
13

Page 18 of 54

Battery Care
If your car is driven only for short distances of
less than 10 miles over a prolonged period of
time, without an occasional drive at highway
speeds, the engine’s charging system will not
maintain the battery. Insufficient use of the vehi-
cle could result in short term starting problems
and in the long term could damage the battery.
In case the car is not operated for more than four
weeks it is advisable to:
a. consider using a proper trickle charger, follow- ing the charger manufacturer’s instructions, to
maintain the battery’s state of charge; or
b. consult your BMW center regarding battery removal. Once removed, the battery must be
charged and stored in a cool, dry place where
it can be protected from freezing. If the battery
will be stored for over 3 months, it must be
recharged every 3 months, or else it will
become damaged and useless.
Please consult with your BMW center for further
guidance and information.
Corrosion Protection
Extensive corrosion protection measures imple-
mented by BMW now make it possible to offer a
twelve-year limited anti-corrosion warranty
against rust perforation on your vehicle provided
that the vehicle is maintained in accordance with
the provisions of the New Vehicle Limited War-
ranty as outlined in the Warranty Section of this
Statement (page 28).
The major degree of corrosion protection is due
to the electrophoretic dip painting process which
cathodically deposits paint particles on all body
parts, attracting paint particles into the minutest
cavities or seams. Body parts are designed to
provide optimum corrosion protection.
During manufacture, exterior body parts receive
an additional corrosion protection coat. Hood,
trunk, doors and other body parts with metal
folds are coated with PVC and sealed from the
outside. All floor panels receive a resilient coating of PVC
for maximum protection against damage due to
stones, etc.
Corrosion protection materials tested over many
years are applied to the surfaces of cavities and
to the entire underside of the vehicle during and
after assembly.
Requirements for maintaining the twelve year
unlimited mileage anti-corrosion warranty are
outlined in the Warranty Section of this State-
ment (page 30).
Restoring corrosion protection
Please take care that anti-corrosion material is
replaced when your car is repaired after body or
chassis damage.
BMW will not accept any liability for any parts
and accessories not approved by BMW.
Underbody maintenance
The underbody has to be cleaned at least once a
year, in spring, with plain water in order to remove
mud, chemical sediments and other deposits. If
those materials are not removed, corrosion (rust)
will occur.
Your BMW center will do this anti-corrosion ser-
vice for you.
WARNING
Do not apply additional undercoating or rust-
proofing on or near the exhaust manifold, exhaust
pipes, catalytic converter or heat shields. During
driving, the substance used for undercoating could
overheat and cause a fire.
14

Page 28 of 54

11. If you accept the arbitrator’s decision, BMW will be bound by the decision, and will com-
ply with the decision within a reasonable
time not to exceed 30 days after we receive
notice of your acceptance of the decision.
12. Please call BBBAUTO LINE at
1 800 955-5100 for further details about the
program.
Special Programs
SOMETIMES BMW OF NORTH AMERICA
OFFERS A SPECIAL ADJUSTMENT PRO-
GRAM TO PAY ALL OR PART OF THE COST
OF CERTAIN REPAIRS BEYOND THE TERMS
OF THE WARRANTY. CHECK WITH YOUR
BMW CENTER TO DETERMINE WHETHER
ANY ADJUSTMENT PROGRAM IS APPLICA-
BLE TO YOUR MOTOR VEHICLE.
BMW Import Processing Centers
As a BMW owner, you will experience BMW qual-
ity first hand. Our dedication to excellence in
design, engineering, and service is among the
best in the world. And we invest heavily every
year in our people and facilities to ensure that our
quality standards are consistently applied from
the factory to the BMW center. Part of that invest-
ment program is devoted to our multi-million-dol-
lar Import Processing Centers staffed by our
highly trained specialists.
At these state-of-the-art facilities, each BMW is
given a thorough inspection after its transatlantic
shipment to the United States. Imperfections in
the mechanical and electrical systems or damage
to the sheet metal, paint, trim or other compo-
nents of the vehicle which may occur during
transportation from the factory to the United
States are normally detected and corrected at
the Import Processing Centers in the United
States. Any defect in material or workmanship
which occurs during the warranty period is cov-
ered under the New Vehicle Limited Warranty.
BMW Roadside Assistance
The BMW Roadside Assistance Program reflects
BMW’s commitment to your complete satisfac-
tion with the BMW ownership experience.
It is available for U.S. version BMWs in all 50
states, Canada, and Puerto Rico 24 hours a day,
365 days a year.
It is a valuable benefit provided to you at no addi-
tional cost. (Subject to certain limitations and
exclusions noted on page 26).
Owner’s Eligibility
You are covered if your vehicle is:
– A new BMW automobile, distributed by BMW
NA, and purchased at an authorized BMW cen-
ter, OR;
– A new BMW automobile, purchased under the BMW NA European Delivery Plan, OR;
– A new, U.S. version, BMW automobile pur- chased under the Diplomatic or Military Sales
programs, operated in any of the 50 states,
Canada and Puerto Rico.
Coverage is provided for the vehicle itself,
regardless of the driver. Protection is concurrent
with the New Vehicle Limited Warranty.
Effective 1-1-06, protection is provided for 4
years/unlimited miles. Note: This does not affect
warranty coverage which remains at 4 years/
50,000 miles.
Getting Started
A temporary Roadside Assistance card can be
found inside your vehicle portfolio. It contains the
24-hour toll-free number for Roadside
Assistance.
For your convenience a decal which shows the
same information as the Roadside Assistance
card, has been affixed to the tool kit cover on the
trunk lid.
In a few weeks you will receive a permanent
Roadside Assistance card by mail. Your date of
purchase and vehicle identification number (VIN)
are embossed on the card.
24

Page:   1-10 11-20 next >