BUICK CENTURY 1993 Owners Manual
Page 181 of 324
Driving with a Trailer
Towing a trailer requires a certain amount of experience.
Before setting out for the open road, you’ll want to get t\
o
know your rig. Acquaint yourself with the
feel of
handling and braking with the added weight of the trailer.
And always keep in mind that the vehicle you
are driving
is now a good deal longer and not nearly
so responsive as
your vehicle is by itself.
Before you
start, check the trailer hitch and platform, safety
chains, electrical connector, lights, tires and mirror
adjustment. If the trailer has electric brakes,
start your vehicle
and trailer moving and then apply the trailer brake controller \
by hand to be sure the brakes
are working. This lets you
check your electrical connection at the same time. During
your trip, check occasionally
to be sure that the load is secure,
and that the lights and any trailer brakes are still working.
Following Distance
Stay at least twice as fit, behind the vehicle ahead as you
would when driving your vehicle without a trailer. This
can help you avoid situations that require heavy braking
and sudden turns.
Passing
You’ll need more passing distance up ahead when you’re
towing
a trailer. And, because you’re a good deal longer,
you’ll
need to go much farther beyond the passed vehicle
before you can return to your lane.
Backing Up
Hold the bottom of the steering wheel with one hand.
Then, to move the trailer to the left, just move that hand
to the left.
To move the trailer to the right, move your
hand to the right. Always back up slowly and, if
possible, have someone guide you.
Making nrns
When you’re turning with a trailer, make wider turns
than normal.
Do this so your trailer won’t strike soft
shoulders, curbs, road signs, trees, or other objects.
Avoid jerky or sudden maneuvers. Signal well in
advance.
Turn Signals When Towing a Mler
When you tow a trailer, your vehicle has to have a
different turn signal flasher and extra wiring. The green arrows on your instrument panel will flash whenever you
signal a turn or lane change. Properly hooked up, the
trailer lights will also flash, telling other drivers you’re \
about to turn, change lanes or stop.
When towing a trailer, the green arrows on your instrument panel will flash for turns even if the bulbs on
the trailer are burned out. Thus, you may think drivers
behind you are seeing your signal when they are not. It’s
important to check occasionally to be sure the trailer
bulbs are still working.
179
ProCarManuals.com
Page 182 of 324
Driving on Grades
Reduce speed and shift to a lower gear before you start
down a long or steep downgrade. If you don’t shift down,
you might have to use your brakes
so much that they
would get hot and no longer work well.
On a long uphill grade, shift down and reduce your speed
to around
45 mph (70 Mh) to reduce the possibility of
engine and transaxle overheating.
If you are towing a trailer that weighs more than 1,OOO
pounds (450 kg) and you have an automatic transaxle
with Overdrive, you may prefer
to drive in “D” instead
of Overdrive.
Parking on Hills
You really should not park your vehicle, with a trailer
attached, on a hill.
If something goes wrong, your rig
could
start to move. People can be injured, and both your
vehicle and the trailer can be damaged.
But if you ever have to park your rig on a hill, here’s how
to do it:
1. Apply your regular brakes, but don’t shift into “P”
2. Have someone place chocks under the trailer wheels. (Park) yet.
3. When the wheel chocks
are in place, release the
regular brakes until the chocks absorb the load.
4. Reapply the regular brakes. Then, apply your parking
5. Release the regular brakes.
When You are Ready to Leave After Parking on a Hill
1. Apply your regular brakes and hold the pedal down
brake, and then shift to
“P” (Park).
while you:
Start your engine;
Shift into a gear; and
Release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is clear of the chocks.
4. Stop and have someone pick up and store the chocks.
ProCarManuals.com
Page 183 of 324
Maintenance When Trailer Towing
Your vehicle will need service more often when you’re
pulling a trailer. See the Maintenance Schedule for more
on this. Things that are especially important in trailer
operation
are automatic transaxle fluid (don’t overfill),
engine oil, belt, cooling. system, and brake adjustment.
Each of these is covered in this manual, and the Index
‘will help you find them quickly.
If you’re trailering, it’s a
good idea to review these sections before you
start your trip.
Check periodically
to see that all hitch nuts and bolts are
tight.
181
ProCarManuals.com
Page 184 of 324
c
I
.
ProCarManuals.com
Page 185 of 324
I
Here you’ll find what to do about some problems that can occur on the road.
Part 5 includes:
HazardWarningFlashers ..............................................................184
Other Warning Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
Jumpstarting
........................................................................\
..
Towing Your Buick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
Engine Overheating
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
IfaTireGoesFlat
...................................................................205
ChangingaFlatTire ........................................,........................205
CompactSpareTire ..................................................................218
If You’re Stuck: In Sand, Mud, Ice or Snow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
ProCarManuals.com
Page 186 of 324
Hazard Warning Flashers
Your hazard warning flashers let you warn others. They
also let police know you have a problem. Your front and
rear turn signal lights will flash on
and off.
Press the button in to make
your front and
rear turn signal
lights flash on and
off.
Your hazard warning flashers work no matter
what position your key is
in, and even if the key isn't in.
To turn off the flashers,
pull out on
the collar.
When the hazard warning flashers are on, your
turn
signals won't work.
ProCarManuals.com
Page 187 of 324
Other Warning Devices
If you carry reflective triangles, you can set one up at the
side of the road about
300 feet (100 m) behind your
vehicle.
Jump Starting
If your battery has run down, you may want to use
another vehicle and some jumper cables to
start your
Buick.
But please follow the steps below to do it safely.
A CAUTION:
Batteries can hurt you. They can be
dangernus because:
@ They contain add that can burn you.
* They contain gas that can explode or Ignite.
9 They contaln enough mlectrielty to burn
If you don’t follow these step exactly, same or
all of these things can hurt you.
you.
To Jump Start Your Buick
1. Check the other vehicle. It must have a 12-volt battery
with
a negative ground system.
2. Get the vehicles close enough so the jumper cables
can reach, but be sure the vehicles aren’t touching
each other.
If ‘they are, it could cause a ground
connection you don’t want. You wouldn’t
be able to
start your Buick, and the bad grounding could damage
the electrical
systems.
185
ProCarManuals.com
Page 188 of 324
‘
A CAUTION:
Mu could be injured if the vehicles roll. Set
the parking brake firmly
on each vehicle. Put
an automatic transaxle
in “P” (Park) or a
manual transaxle
in “N” (Neutral). I
3. ”urn off the igni;,,n on both vehicles. lwLLL all .,hts
that aren’t needed, and radios. This will avoid sparla
and help save both batteries. And it could save your radio!
If you leave your radio OI,, it could be badl,
4. Open the hoods and locate the batteries.
I 1
A CAUTION:
An electric fan can start up even when the
engine
is not running and can Injure you. Keep
hands, clothing and tools
away from any
underhood electric fan.
I
Find the positive (+) and negative (-) terminals on
each battery.
-
/1 CAUTION:
Using a match near a battery can cause
battery gas to explode. People have been hurt
doing this, and some have been blinded.
Use a
flashlight If you need more light.
Be sure the battery has enough water. Mu
don’t need to add water to the Delco
Freedom@ battery installed
in every new GM
vehicle. But if a battery has filler caps, be sure
the
right amount of fluid is there. If it is low,
add water to take care of that first. It you don’t,
explosive gas could be present.
Battery
fluid contains acid that can burn you.
Don’t get it on you. Ifyou accidentally get it in
your
eyes or on your skin, flush the place with
water and get medical help immediately.
-
5. Check that the jumper cables don’t have loose or missing insulation.
If they do, you could get a shock.
The vehicles could be damaged, too.
186
ProCarManuals.com
Page 189 of 324
Before you connect the cables, here are some basic things
you should know. Positive
(+) will go to positive (+) and
negative
(-) will go to negative (-) or a metal engine
part. Don’t connect
(+) to (-) or you’ll get a short that
would damage the battery and maybe other
parts, too.
/r CAUTION:
Fans or other moving engine parts can lnjum
you badly; Keep your hands away fmm mwlng
parts once the englnes are running.
6. Connect the red positive (+) cable to the positive (+)
terminal of the vehicle with the dead battery. Use a
remote positive
(+) terminal if the vehicle has one.
187
-
ProCarManuals.com
Page 190 of 324
3'.
7. Don't let the other end touch metal. Connect it
to the positive (+)
terminal of the good
battery. Use a remote
positive
(+) terminal if
the vehicle has one.
8. Now connect the black negative
(-) cable to the
good battery's negative
(-) terminal.
Don't let the other end
touch anything until the
next step. The other end of
the negative cable
doesn't
go to the dead battery. It
goes to a heavy unpainted
metal part on the engine of
the vehicle with the dead
battery.
9. Attach the cable at least 18 inches (45 cm) away from
the dead battery, but not near engine parts that move.
The electrical connection is just
as good there, but
the chance
of sparks getting back to the battery is
much less.
10. Now start the vehicle with the good battery and run
U. Try to start the vehicle with the dead battery. the engine for a while.
If it won't start after a
few tries,
it probably needs
service.
ProCarManuals.com