manual radio set BUICK LESABRE 2005 Get To Know Guide

5
AMFM Stereo with Cassette Tape
Player, and CD Player with Automatic
Tone Control (if equipped)
Cassette Tape Player Controls
With the radio on, insert the tape into
the tape slot. The tape will begin to play.
BAND:Press this button to listen to the
radio when a cassette or CD is playing.
CD TAPE:Press this button to play a
cassette tape or a CD when listening tothe radio.
6 SIDE:Pressing this button changes
the side of the tape.
1 : Press this button to reverse the
tape rapidly. Press it again to return toplaying speed.
2 : Press this button to quickly
advance to another part of the tape.
Press the button again to resume playing the tape.
: Press this button to search for
the next or previous selection on thetape.
: Pressing this button removes the
tape.
Setting the Clock
H:
Press and hold this button until the
correct hour appears.
M:Press and hold this button until the
correct minute appears.
AMFM Stereo with CD
CD Player Controls
With the radio on, insert the CD partway
into the slot with the label side up. The
player will pull the CD in and begin to
play.
DISP:Press this button to see which
track is playing. Press it again within fiveseconds to see how long the track has
been playing. To change the display
(track or elapsed time), press DISP toselect the display you want and hold thebutton until the display flashes.
4 RDM:Press this button to hear tracks
in random order. Press it again to stop.
1 : Press and hold this button to
quickly reverse within a track.
2 : Press and hold this button to
quickly advance within a track.
: Press the right arrow to go to
the next track. Press the left arrow to goto the start of the current track.
BAND:Press this button to change to
the radio while a CD is playing.
: Press this button to remove the
disc.
CD:Press this button to play a CD while
listening to the radio.
See Section 3 of your Owner Manual.

Getting to Know YourLeSabre16
Driver Memory Seat and Mirrors
(if equipped)
With the vehicle in Park (P), adjust
the driver’s seat, including the lumbar
position (if equipped) and both outside
mirrors to a comfortable position. This feature also recalls the radio and
climate control settings. However, itdoes not include the power headrestraint settings.
• Press and hold the appropriate
Driver/MEMORY button (located on
the driver’s door panel), to corre
spond with the DIC Driver number,until you hear two beeps.
•Follow the previous step with the
other key fob/transmitter to set up for
a second driver, and select the other
Driver/MEMORY button.
•Press and release the EXIT button.
With the transaxle in Park (P), the
seat will move all the way back or toyour personalized exit position.
To recall the memory seat and mirrors
using the key fob/transmitter, programthe DIC Seat Recall feature to ON.
See Section 2 of your Owner Manual.
Driver Information Center (DIC)
(if equipped)
The DIC displays information about how
your vehicle is functioning and showswarnings and messages if a systemproblem is detected.
StabiliTrak®Message
When the “STABILITY SYS ACTIVE”
message appears, a computercontrolled system is automatically activated. Some brake pedal noise or
vibration is normal. (StabiliTrak is anoptional feature.)
DIC Button Descriptions
• Press the ODO/TRIP button to dis
play the vehicle’s total mileage, and
Trip 1 or Trip 2 miles. Press theODO/TRIPbutton for the appropriate
trip number; then press the RESET
button to reset the trip odometer.
•Press the FUELINFO button to dis
play fuel economy, fuel average, fuelinstantaneous, fuel range and fuel
used. Press the ODO/TRIP button forthe appropriate trip number; thenpress the RESETbutton while the
average fuel economy is displayed inthe DIC to learn what the averagefuel economy is from a new startingpoint.