radio controls BUICK LESABRE 2005 Get To Know Guide

Getting to Know YourLeSabre4
Audio Systems
AMFM Stereo with Cassette Tape
Player, and CD Player with Automatic
Tone Control (if equipped)
Radio Controls
PWR:
Press this knob to turn the radio
on or off. Turn the knob to the left to
decrease volume. Turn it to the right toincrease volume.
BAND: Press this button to select AM,
FM1 or FM2, or XM Radio.
TUNE:Turn this knob to choose radio
stations.
SEEK:Press the left or right arrow to go
to the next higher or lower station. Pressa SEEK arrow for two seconds; SCAN
will appear in the display. Use SCAN tolisten to stations for a few seconds.
Press and hold one of the SEEK arrows
for more than four seconds to listen toeach of your preset stations for a fewseconds. Press an arrow again to stopscanning.
EQ:Press this button to choose bass
and treble equalization settings for
different program types.
AUDIO:Push and release this button
until BASS, MID or TREBLE appears on
the display. Then turn the Audio knob toincrease or decrease.
Also, use this button to adjust the bal
ance and fade between the speakers.
Radio Data System (RDS) Features
TRAF:
Press this button to receive traf
fic announcements. TRAF will appear on
the display and when a traffic announcement comes on, you will hear it.
INFO:If the current station has a
message, press this button to view themessage.
PTYP:Press this button to find the
desired program type. Then, find a cate
gory by turning the AUDIO knob. Presseither SEEK arrow to select a category
and take you to the category’s first station.
ALERT!:Alert warns of local or national
emergencies. You will hear the
announcement, even if the volume ismuted or a cassette tape or compact
disc is playing. You will not be able to
turn off Alert announcements.
Numbered Buttons
The six numbered buttons let you set up
to six AM and 12 FM stations (six FM1
stations and six FM2 stations).
To set a station:
• Turn the radio on.
•Select the band.
• Tune in the desired station.
• Press and hold one of the six
numbered buttons until you hear one beep; then release the button.
• The station is now preset.

5
AMFM Stereo with Cassette Tape
Player, and CD Player with Automatic
Tone Control (if equipped)
Cassette Tape Player Controls
With the radio on, insert the tape into
the tape slot. The tape will begin to play.
BAND:Press this button to listen to the
radio when a cassette or CD is playing.
CD TAPE:Press this button to play a
cassette tape or a CD when listening tothe radio.
6 SIDE:Pressing this button changes
the side of the tape.
1 : Press this button to reverse the
tape rapidly. Press it again to return toplaying speed.
2 : Press this button to quickly
advance to another part of the tape.
Press the button again to resume playing the tape.
: Press this button to search for
the next or previous selection on thetape.
: Pressing this button removes the
tape.
Setting the Clock
H:
Press and hold this button until the
correct hour appears.
M:Press and hold this button until the
correct minute appears.
AMFM Stereo with CD
CD Player Controls
With the radio on, insert the CD partway
into the slot with the label side up. The
player will pull the CD in and begin to
play.
DISP:Press this button to see which
track is playing. Press it again within fiveseconds to see how long the track has
been playing. To change the display
(track or elapsed time), press DISP toselect the display you want and hold thebutton until the display flashes.
4 RDM:Press this button to hear tracks
in random order. Press it again to stop.
1 : Press and hold this button to
quickly reverse within a track.
2 : Press and hold this button to
quickly advance within a track.
: Press the right arrow to go to
the next track. Press the left arrow to goto the start of the current track.
BAND:Press this button to change to
the radio while a CD is playing.
: Press this button to remove the
disc.
CD:Press this button to play a CD while
listening to the radio.
See Section 3 of your Owner Manual.