window BUICK LESABRE 2005 Get To Know Guide

Instrument Panel . . . . . . . . . . . . . . . . . . . . . . . . . .2
Instrument Panel Cluster . . . . . . . . . . . . . . . . . . .3
Audio Systems . . . . . . . . . . . . . . . . . . . . . . . . . . .4Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . .6
Power Seat Controls . . . . . . . . . . . . . . . . . . . . . . .7
Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Door Locks and Child Security . . . . . . . . . . . . . .8
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Window Controls . . . . . . . . . . . . . . . . . . . . . . . . . .9Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Lamp Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Turn Signal/Multifunction Lever . . . . . . . . . . . .10Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . . .11Headlamps — High Beam . . . . . . . . . . . . . . . . . .11
Trunk Release . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Valet Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Convenience Features . . . . . . . . . . . . . . . . . . . .13OnStar
® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
HeadUp Display (HUD) . . . . . . . . . . . . . . . . . . . .14
Universal Transmitter . . . . . . . . . . . . . . . . . . . . .15
Driver Memory Seat and Mirrors . . . . . . . . . . . .16
Driver Information Center (DIC) . . . . . . . . . . . . .16
DIC Programming . . . . . . . . . . . . . . . . . . . . . . . .17
Roadside Assistance . . . . . . . . . . . . . . . . . . . . .20
My GMLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Congratulations on your purchase of a Buick LeSabre. Please read this information and your Owner Manual
to ensure an outstanding ownership experience. Note that your vehicle may not include all the featuresdescribed in this booklet. Place this booklet in your Owner Manual portfolio for easy reference.

Getting to Know YourLeSabre6
Climate Controls
Dual Automatic ComforTemp Climate
Control
AUTO:
Press this button to make the
system automatically adjust to changesin temperature inside the vehicle.
TEMP:Press this button’s up or down
arrow to increase or decrease the interior temperature.
FAN:Press this button’s up or down
arrow to increase or decrease blowerfan speed.
AIR FLOW:Press this button’s up or
down arrow to select airflow direction tothe FLOOR, MIDFLOOR, MID andWINDSHIELDFLOOR.
Display
The display indicates the outside tem
perature, your interior temperature setting selection, current airflow directionsettings and fan speed.
VENT:Press this button to allow outside
air to flow through the vehicle. Press the
button again to turn the vent off.
FRONT:Press this button to defrost the
windshield.
REAR:Press this button to defog the
rear window. At speeds above 30 mph(48 km/h), the defogger will stay on untilyou press the button again. At speeds
below 30 mph (48 km/h), the defogger
will turn off automatically.
RECIRC:Press this button to limit the
amount of outside air entering the vehicle.
OFF:Press this button once to turn off
the passenger comfort control system.
Press the button twice to turn off themain system.
Personal Choice Comfort Controls
(if equipped)
This feature allows two different drivers
to recall their own climate control
settings.
The settings that are recalled are the
last choices of the driver prior to exitingthe vehicle, and are recalled by pressingthe key fob/transmitter unlock button orby pressing one of the memory buttons
on the driver’s door panel.
Passenger Climate Control
The controls for this feature are located
on the passenger’s door armrest. Pressthe red arrow to raise the inside temperature on the passenger side.Press the blue arrow to decrease theinterior air temperature on the
passenger side. You can adjust the temperature up to 5˚F cooler or warmerthan the driver’s setting.
See Section 3 of your Owner Manual.

9
Window Controls
The power window controls are located
on the driver’s door armrest.
ExpressDown Window
AUTO:
Press this switch rearward and
release to express open the window.Press the switch again to stop a windowin express.
Window Lockout
LOCK:
Press this switch to disable the
passenger window switches. The switch
will illuminate to indicate the lock isactive.
Press the switch again to enable the
passenger window switches.
Window Lockout is a programmable fea
ture. Refer to the DIC Programming section in this guide for further information.
See Section 2 of your Owner Manual.
Sunroof (if equipped)
The ignition must be in the ON position
or the Retained Accessory Power (RAP)must be active to operate the sunroof.
The sunroof switch is located on the
headliner, between the sun visors.
Press and hold the switch rearward and
release to express open the glass paneland sunshade. The sunroof will open
automatically to the fullopen position.
Press the switch again at the desired
point to stop the panel in a partially openposition.
Press and hold the switch forward to
close the glass panel. The sunshademust be manually closed.
Vent
The vent position raises the rear portion
of the sunroof. Once it is closed, the
sunroof can be opened to a vent position. (The sunshade must be openedand closed manually for vent operation.)
Push the sunroof switch upward to vent.Pull the sunroof switch downward to
close.
See Section 2 of your Owner Manual.

To program and recall your personal
choice features
Turn the ignition on and place vehicle in
Park (P).
1. To inform the DIC which driver you
are, press the appropriate memoryseat control button, or press theunlock symbol on your key fob/
transmitter.
2.Press and hold ENG/MET for five
seconds. “Welcome to Buick Options
Feature” will appear on the DIC dis
play. The next display will be your
driver number. Press ENG/MET to
select the feature you want to program.
Follow the display information for each
feature. Press RESET to save the selection and advance to the next feature.
When finished programming, “Options
Feature Selection Done” will appear on
the DIC display.
To exit without programming each
personal choice feature
Press another DIC button or turn the
ignition to off. Your selections will beretained.
17
• Press the GAGE INFO button to dis
play oil pressure, coolant temperature, battery state, oil life index andtire pressure information.
• Press the RESET button, along with
other buttons, to reset system functions.
After an oil change
• Press and hold the RESET button
while the oil life index is displayed in
the DIC. After 5 seconds, the oil life will change to 100%.
•Press the ENG/MET button to change
the display to either English or metric
units.
See Section 3 of your Owner Manual.
DIC Programming
DIC Personal Choice Programming
The DIC can be used to program the fol
lowing features for two drivers:
• Outside Curb View Assist Mirror
• Automatic Door Locks
• Delayed Locking
• Security Feedback
• Perimeter Lighting
• Memory Seats
• Window Lockout
• Driver ID
• Language Selection
The DIC recognizes the drivers as
Driver #1 and Driver #2
(Memory 1 and
Memory 2).
Each key fob/transmitter is unique and
marked with either a #1 or #2 on theback.

19
Perimeter Lighting
To turn the headlamps, parking lamps
and backup lamps on when you press
on the key fob/transmitter:
1.
PERIMETER LIGHTS (OFF/ON)Press ENG/MET to select OFF or
ON.
If you select OFF for PERIMETER
LIGHTS, there will be no perimeterlighting.
If you select ON for PERIMETER
LIGHTS, the lights will illuminate.
Press RESET to record your choice.
Memory Seats Recall
To recall the position of your seat and
mirrors when you press unlock on thekey fob/transmitter:
1.
SEAT RECALL(OFF/ON)Press
ENG/METto select OFF or ON.
If you select OFF for SEAT RECALL,
there will be no seat recall feature.
If you select ON for SEAT RECALL,
the seat and mirrors will move to theirpreset memory positions when thevehicle is unlocked using the key
fob/transmitter.
Press RESET to record your choice.
2.
RECALL POSITION MEMORY(EXIT)Press ENG/MET to select
MEMORYor EXIT.
If you select MEMORY for RECALL
POSITION, the seat and mirrors willmove to their preset memory positions.
Note:If you desire perimeter lighting,
you must select LIGHTS for UNLOCKFEEDBACK.
If you select EXIT for RECALL POSI
TION, the seat and mirrors will moveto their preset exit positions.
Press RESET to record your choice.
Window Lockout
To select the number of passenger win
dows you want to prevent from beingopened:
1.
WINDOW LOCK (R+ PASS/REAR)Press ENG/MET to select R+ PASS
or REAR.
If you select R+ PASS for WINDOW
LOCK, all three passenger windowswill lock out.
If you select REAR, the two rear win
dows will lock out.
Press RESET to record your choice.
See Section 3 of your Owner Manual.
Note:This feature is activated by press
ing the WINDOW LOCK switch on the
driver’s door.