brake sensor BUICK LUCERNE 2007 Get To Know Guide

StabiliTrak®is an advanced computer
controlled vehicle stability enhancementsystem that assists with directional control
of the vehicle in difficult driving conditions.
It turns on automatically every time you startyour vehicle.
When the system senses a discrepancy
between your intended path and the directionthe vehicle is actually traveling, it selectivelyapplies brake pressure at any one of thewheels to help steer the vehicle in the direction in which you are steering.
See Section 4 of your Owner Manual.
StabiliTrak®– Stability Control
System (if equipped)
Getting to Know YourLucerne18
The brake assist system monitors the inten
tion of the driver while braking. If the systemsenses that hard/fast pressure has beenapplied to the brake pedal, the system will
generate additional pressure, making it easier to maintain brake application. When thishappens, the brake pedal may feel easier to
push. This is normal; just hold the brake
pedal down firmly.
See Section 4 of your Owner Manual.
Brake Assist (if equipped)PERFORMANCE & MAINTENANCE
Magnetic Ride Control automatically adjusts
the ride of your vehicle through a computerused to control and monitor the suspension
system. The computer receives input from
various sensors to determine the proper system response. This provides enhanced con
trol and ride comfort under a variety of roadconditions.
See Section 4 of your Owner Manual.
Magnetic Ride Control
(if equipped)
The traction control system limits wheelspin,
which is especially useful in slippery road
conditions. You should always leave the sys
tem on. However, if your vehicle becomesstuck and rocking the vehicle is required, the
system should be turned off.
To turn off the system, press the traction
control button located on the center console.For vehicles without a center console, thebutton is located at the end of the gearshift
lever.
See Section 4 of your Owner Manual.
Traction Control