transmission BUICK RAINIER 2005 Get To Know Guide

Getting to Know YourRainier6
Programmable Automatic Power
Door Locks
Your vehicle includes an automatic door
lock/unlock feature with a choice of four
modes, as well as automatic door lockout protection to prevent locking thekeys in the vehicle. In the event thepower door lock switch is activatedwhen a door is open and the key is inthe ignition, the driver door will unlock.
Locking Options:The default setting
for the programmable automatic powerdoor locks is to lock automatically whenthe transmission is shifted into gear (Mode 1).
Other locking options include:
Mode 2: All doors lock when vehicle
speed is over 8 mph (13 kph)
Unlocking options:Choose one of the
following options before personalizingyour unlocking preference:
Mode 1: Driver door unlocks when the
transmission is placed into Park
Mode 2: All doors unlock when the
transmission is shifted into Park
Mode 3: All doors unlock when the key
is removed from the ignition
Mode 4: No automatic door unlock
Memory Settings for Driver’s
Seat, Mirrors and Pedals
Use the driver’s door mounted controls
(shown above) to program and recallmemory settings for the following features:
• Driver’s seat, including seatback
recliner and lumbar adjustment
• Accelerator and brake pedals
• Outside rearview mirrors
Programming a Memory Setting
• Adjust the above features to your
preferred settings.
• Press and hold memory 1 or 2 button
located on the driver’s door until two
chimes sound (about three seconds). This confirms that your settings are stored.
• To program memory positions for
another driver, repeat the process using the other memory button.
Recalling Memory Settings
Each time memory button 1 or 2 on the
driver’s door is pressed while the vehicle
is in Park (P), a single chime will soundand the memory position(s) will berecalled.
See Section 2 of your Owner Manual.