set clock CADILLAC CTS 2003 1.G Owners Manual

2-65
Storage Compartments
Glove Box
The glove box is located in front of the passenger's seat
on the instrument panel. To lock the glove box door,
insert your key into the lock cylinder and turn it
clockwise. Turn the key counterclockwise to unlock
the door.
Map Pockets
The map/storage pockets are located on each door as
well as on the back of the front seatbacks.
Center Console Storage and Cupholders
The center console has a storage tray, a storage
compartment for CDs or cassette tapes, a dual cupholder
with a removable rubber liner and an armrest. To access
the storage area, pull up on the latch located at the front
of the armrest.
Rear Seat Cupholders
There are two cupholders located in the rear seat center
armrest. Pull the armrest down to access the cupholders.
Convenience Net
The convenience net attaches to the floor and back wall
of the trunk using eight anchor points. Put small loads,
like grocery bags, behind the net. It can help keep them
from falling over during sharp turns or quick starts
and stops.
The net is not for larger, heavier loads. Store them in the
trunk as far forward as you can. When not using the net,
hook the net to the tabs securing it to the sill plate.

2-84
Tachometer
This gage indicates the
engine speed in revolutions
per minute (rpm).
NOTICE:
Do not operate the engine with the tachometer in
the shaded area or engine damage may occur.
Engine Speed Limiter
This feature prevents the engine from operating at too
many revolutions per minute (rpm). When the engine's
rpm are too high, the fuel supply to the engine will be
limited. When the rpms return to normal, the fuel supply
will return to normal. This helps prevent damage to
the engine.
Clock
Your vehicle has an analog clock on the instrument
panel cluster. For more information on setting the time,
see ªSetting the Clockº in the Index. If your vehicle
has the optional Navigation/audio system, see
ªAdjusting, Clockº in the Index of the CTS
Entertainment and Navigation System Supplement
supplied with the vehicle.

2-126
Accessing the DIC Main Menu
(Base Audio System)
There are two different procedures for accessing the
DIC main menu depending upon whether or not your
vehicle has the optional Navigation system.
To access the main menu of the DIC, do one of the
following:

Using the base audio system, press the TUNE/SEL
knob once. Turn the knob clockwise or
counterclockwise to scroll through the menu items.

Refer to the Navigation Supplement supplied with
your vehicle for more information on the accessing
DIC main menu and descriptions of the menu items
for the Navigation system.
DIC Main Menu
The DIC main menu for the base audio system consists
of the following menu items:


BASS - MID - TREBLE


EQ

DSP

AV C

H/A

AUTO STORE

PTY

TA

RDS MSG

AF

SEEK LOCAL/DISTANT

ENGLISH UNITS/METRIC UNITS

TCS

SET CLOCK

SETUP

2-129
TCS (Traction Control System): You can enable
or disable the traction control system using this menu
item. Press the TUNE/SEL knob to switch between on
and off.
You can also turn the traction control system off using
the traction control button located in the glove box or
by programming one of the steering wheel controls
(1, 2, 3 or 4) or audio system softkeys to enable/disable
the TCS. See ªReconfigurable Steering Wheel Controlsº
and ªConfigurable Radio Display Keysº in the Index for
more information.
When you disable the traction control system, the
Traction Suspended message will appear on the DIC and
the traction control system warning light on the
instrument panel cluster will come on. See ªDriver
Information (DIC) Messagesº and ªTraction Control
System Warning Lightº listed previously in this section
for more information.SET CLOCK
Use this menu item to
set the time on the
vehicle's clock.
See ªSetting the Clockº in the Index for more
information.
SETUP: When you select this menu item, the following
submenu is available:

Personalization

Configure Display Keys

Configure SWC (Steering Wheel Control) Keys

Clear Tape Hours
You can use the items on this submenu to customize
your vehicle's audio system and optional memory
features. See ªVehicle Programming and Personalization
Features,º ªReconfigurable Steering Wheel Controlsº
and ªCare of Your Cassette Tape Playerº in the Index for
more information on these menu items.

3-
3-1
Section 3 Comfort Controls and Audio Systems
In this section, you'll find out how to operate the comfort control and audio systems offered with your vehicle.
Be sure to read about the particular systems supplied with your vehicle.
3
-2 Comfort Controls
3
-2 Climate Control System
3
-6 Air Conditioning
3
-6 Defogging and Defrosting
3
-6 Rear Window Defogger
3
-7 Ventilation System
3
-9 Climate Control Steering Wheel Controls
3
-9 Audio Systems
3
-10 Setting the Clock
3
-10 AM-FM Radio with Cassette Tape and
Compact Disc Player with Radio Data
Systems (RDS) and Digital Signal
Processing (DSP)3
-27 Navigation/Radio System (Option)
3
-27 Theft-Deterrent Feature
3
-28 Audio Steering Wheel Controls
3
-29 Understanding Radio Reception
3
-30 Tips About Your Audio System
3
-31 Care of Your Cassette Tape Player
3
-32 Care of Your Compact Discs
3
-32 Care of Your Compact Disc Player
3
-33 Diversity Antenna System

3-10 Setting the Clock
1. Press the TUNE/SEL knob to enter the main menu.
2. Turn the TUNE/SEL knob until SET CLOCK
is displayed.
3. Press the TUNE/SEL knob to select SET CLOCK.
4. Turn the TUNE/SEL knob to adjust the time setting.
5. Press the TUNE/SEL knob to update the time.
VEHICLE TIME UPDATED will appear on the
display. The time on the analog clock, located in the
instrument panel cluster, will adjust.
The time of an FM station broadcasting Radio Data
System (RDS) information will update the analog
clock automatically.
AM-FM Radio with Cassette Tape and
Compact Disc Player with Radio Data
Systems (RDS) and Digital Signal
Processing (DSP)
Six-Disc CD Player Audio System
Shown
- Single CD Player Similar

3-21
Cassette Tape Messages
If an error occurs while trying to play a cassette tape, it
could be that one of the following has occurred:

The cassette tape is tight and the cassette player
cannot turn the hubs of the tape. Hold the cassette
tape with the open end down and try turning the right
hub counterclockwise with a pencil. Flip the tape
over and repeat. If the hubs do not turn easily, your
cassette tape may be damaged and should not be
used in the player. Try a new tape to be sure your
player is working properly.

The cassette tape is broken. Check to see if your tape
is broken. Try a new tape.
CLEAN TAPE: If this message appears on the display,
the cassette tape player needs to be cleaned. It will still
play tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See ªCare of
Your Cassette Tape Playerº in the Index.
If any error occurs repeatedly or if an error can't be
corrected, contact your dealer.Your cassette tape player automatically reduces
background noise. Dolby Noise Reduction is
manufactured under a license from Dolby Laboratories
Licensing Corporation. Dolby and the double
-D symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
Auto CrO
2 allows the cassette tape player to adjust to
the type of cassette tape for clearer sound for CrO
2cassette tapes.
Using the Single Compact Disc Player
Insert a disc partway into the slot, label side up. The
player will pull it in. If the ignition and the radio are on
the disc will begin playing. The display will show a CD
symbol. CD and the track number will appear on the
display when a CD is playing. A compact disc may be
loaded with the radio off but it will not start playing
until the radio is on.
The integral CD player can play the smaller 8 cm
compact discs with a 12 cm adapter. Full
-size compact
discs and the smaller compact discs (with the 12 cm
adapter) are loaded in the same manner. See you dealer
for more information about the 12 cm adapter for using
8 cm discs.