change wheel CADILLAC ESCALADE 2019 Convenience & Personalization Guide

Press and hold the Cancel button to switch between regular
Cruise Control and Adaptive Cruise Control. When ACC is active, a
green
indicator illuminates and the following gap is displayed.
When the vehicle is turned on, the Cruise Control is set to the last
mode used.
Following Gap (Adaptive Cruise Control♦
)
Press repeatedly to set a following gap (the time between your

vehicle and a detected vehicle ahead) of Far, Medium, or Near.
When a slower vehicle is detected ahead, the
Vehicle Ahead
Indicator is displayed and the vehicle brakes to maintain the select -
ed following gap. The ACC system may slow your vehicle to a stop
behind the detected vehicle. When the ACC system is holding the
vehicle at a stop, be prepared to manually apply the brakes.
If driver action is required to apply sufficient braking behind a
detected vehicle, a red alert flashes on the windshield and the
Safety Alert Seat pulses or beeps sound (if selected). See Safety
Alert Seat on page 14.
Note: Changing the gap settings automatically changes the alert timing
sensitivity for the Forward Collision Alert system.
See Driving and Operating in your Owner's Manual.
VOICE RECOGNITION
Push to Talk
Press to interact with the OnStar, Bluetooth or Infotainment

system. Wait for the beep before speaking.
End Call/Mute
Press to end/decline a call or mute/unmute the audio system.
See Instruments and Controls in your Owner's Manual.
CRUISE CONTROL/ADAPTIVE
CRUISE CONTROL♦
On/Off
SET Set Speed
With Cruise Control on, press
the control bar down fully to
set the cruise speed. The

indicator illuminates in green.
RES Resume Speed
With Cruise Control on, press the control bar up fully to resume the
previous set speed. Adaptive Cruise Control♦ can be resumed from
a stop.
+ – Adjust Speed
When active, press the control bar up (+) or down (–) lightly to
increase or decrease the set speed by 1-mph increments; press and
hold to continue increasing/decreasing speed.
With Adaptive Cruise Control
♦, press and release the control bar
up (+) or down (–) to increase or decrease the set speed by 1-mph
increments; press and hold momentarily to increase or decrease
the set speed to the next 5-mph interval on the
speedometer.
Cancel
Press to cancel Cruise Control without erasing the set speed
from memory.
Switching between Regular Cruise Control and Adaptive
Cruise Control♦
Adaptive Cruise Control (ACC) maintains the driver-selected

following gap by braking or accelerating automatically while you
continue to steer.
5
STEERING WHEEL CONTROLS
♦ Optional equipment

7
DRIVER INFORMATION CENTER
The \b0'4#0
,$-0+2'-,#,2#0I\bIC) on the instrument cluster can
be set to display a variety of vehicle information.
DIC MENUS
Use the 5-way control on the steering wheel to view the menus:
Info – display trip and fuel information
Audio – browse music or change the audio source
Phone – view active call and scroll through contacts
Navigation – view active route or change prompts
INFO MENU
1. Use the 5-way control on the steering wheel to view the Options
page in one of the display zones. Press SEL (Select) to enter the
Options menu.
2. Scroll
down to highlight Info Pages; press SEL.
3. Scroll
up or down to move through the Info items.
4. Press SEL to select or deselect an item to display in the Info
menu.
See Instruments and Controls in your Owner's Manual.
HEAD-UP DISPLAY♦
The \f#"R.\bisplay (\f\b) projects some operating information
onto the windshield. The \f\b controls are located on the left side
of the instrument panel.
HUD HUD
Lift up or press down to adjust the position of the image on the
windshield. It cannot be adjusted side-to-side.
INFO
Press to select from four displays: Speed View, Audio/Phone View,
Navigation View, and Performance View.
+ – Brightness
Lift up or press down to brighten or dim the display.
\f-*""-5,2-230,-j2&#"'1.*7.
See Instruments and Controls in your Owner's Manual.
♦
Optional equipment