seats CADILLAC ESCALADE 2019 Convenience & Personalization Guide

4
KEYLESS (PUSHBUTTON) START
The Remote Keyless
Entry (RKE) transmitter
must be in the vehicle to
turn on the ignition.
START
With the vehicle in
Park or Neutral,
press the brake pedal
and then press the
ENGINE START/
STOP button to start the engine. The green indicator on the

button will illuminate.
Note: If the RKE transmitter battery is weak, place the transmitter in the
pocket in the center console storage compartment to enable the engine to
start. Replace the transmitter battery as soon as possible.
STOP/OFF
Shift to Park and press the ENGINE START/STOP button to
turn off the engine.
Power will be available for 10 minutes to operate the audio system
until the driver’s door is opened and to operate the windows and
sunroof
♦ until any door is opened.
ACCESSORY
With the engine off and the brake pedal NOT depressed, press
the ENGINE START/STOP button to place the ignition system
in the Accessory mode. The amber indicator on the button will
illuminate.
See Driving and Operating in your Owner's Manual.
ADAPTIVE REMOTE START
STARTING THE VEHICLE
1. Press and release the Lock button on the Remote Keyless
Entry transmitter.
2. Immediately press and hold the
Remote Start button until
the turn signal lamps flash (about 4 seconds).
When the vehicle starts, the doors remain locked and the park -
ing lamps will light and remain on while the engine is running.
The engine will continue running for 10 minutes. Repeat these
steps for a 10-minute time extension. Remote start can be
extended only once.
3. Before driving, press the brake pedal and then press the
ENGINE START/STOP button to turn on the ignition.
CANCELING A REMOTE START
Press and hold the Remote Start button until the parking
lamps turn off.
HEATED/COOLED SEAT OPERATION
Remote Start Auto \f#2#"H--*#"#2s – The heated or cooled
seats will turn on during a remote start when outside temperatures
warrant if the Remote Start Heated or Cooled Seats option is select -
ed in the Settings menu. Go to Settings > Vehicle > Remote Lock,
Unlock, Start. \b30',%0#+-2#1202A2&#1#2 3w-,',"'!2-01"-
not illuminate. The heated or cooled seats turn off when the igni -
tion is turned on. For the seats to remain on after the remote start,
the Auto Heated and Cooled Seats feature must be enabled.
Auto \f#2#","--*#"#21 – Anytime the vehicle is on, the
heated or cooled seats will activate automatically based on the vehi -
cle’s interior temperature. The seat button indicators will illuminate
when the heated or cooled seats are on. To enable this feature, go to
Settings > Vehicle > Climate and Air Quality.
See Keys, Doors and Windows in your Owner's Manual.

SET MEMORY POSITIONS
With the vehicle in Park and the

ignition On or in Accessory mode:
1. Adjust the power driver’s seat,
power adjustable pedals, power
outside mirrors, and power tilt/
telescopic steering column to the
desired positions.
2. Press and release the SET button.
A beep will sound. Immediately
press and hold
button 1 until two
beeps sound.
3. Repeat the steps using button 2 for a second driver.
To store driver
\b11#2A"(312 *#.#"*1,"12##0',%!-*3+,

positions for more clearance when exiting the vehicle, repeat steps
1 and 2 using the
EXIT button.
RECALL POSITIONS
Press and hold button 1 or 2 or the EXIT button until the
seat, pedals, mirrors and steering column reach the set position.
The memory/exit positions can be programmed to be recalled
automatically when the ignition is turned On/Off (for exit recall,
the driver
\b1"--0+312 #-.#,#"K.
To set the Auto Memory Recall or Easy Exit Options, go to
Settings > Vehicle > Comfort and Convenience > Auto Memory
Recall or Easy Exit Options.
See Seats and Restraints in your Owner's Manual.
18
POWER FRONT SEATS
SEAT ADJUSTMENTS
A. Seat Cushion Adjustment
Move the front horizontal

control to move the seat for -
ward or rearward, or to tilt,
raise or lower the seat.
B. Seatback Adjustment
Move the vertical control to
recline or raise the seatback.
C. Lumbar Adjustment
Move the rear control fore/aft to increase/decrease lumbar

support or up/down to raise/lower the lumbar location.
ADDITIONAL SEAT ADJUSTMENTS (PLATINUM MODEL)
D. Feature Select Control
Press and release the control
to display the seat adjustment
features on the infotainment
screen. Press and hold to scroll
through the adjustments.
E. 4-Way Control Pad
Use the 4-way control pad to
make adjustments up, down,
forward, or rearward to the
selected feature.
F. Massage On/Off
With the ignition on, press to recall the last massage type and
intensity.
A
F D
C B
E

2. Press the Seat Release button (A) on the panel behind the
rear doors or the x2 button (B) in the rear cargo area to fold
the seat forward. Press either button again to tumble the seat
forward.
UNFOLDING 2ND-ROW SEATS
1. Pull down the seat until it latches to the floor.
2. Lift up the seatback until it locks in place.
POWER FOLDING/UNFOLDING 3RD-ROW SEATS
1. With the vehicle in
Park, lower the head
restraint, unbuckle the
seat belt, and make
sure nothing is on
the seat.
2. Press and hold the
bottom of the
Seat
Release button (C) in
the rear cargo area to
fold the seat flat.
3. Press and hold the top
of the
button to raise the seatback.
See Seats and Restraints in your Owner's Manual.
19
REAR SEATS
FOLDING 2ND-ROW SEATS
The 2nd-row seats fold and tumble to provide more cargo space and
access to the 3rd-row seats.
1. Lower the head
restraint, unbuckle
the seat belt, make
sure nothing is under
or in front of the seat,
and move the front
seat forward enough
to allow room for the
folded seat.
2. Lift the lever on the
lower outboard side of
the 2nd-row seat. The
seatback will fold 
forward.
3. Lift the lever again to tumble the seat forward.
POWER FOLDING 2ND-ROW SEATS♦
1. Lower the head
restraint, unbuckle
the seat belt, make
sure nothing is under
or in front of the seat,
and move the front
seat forward enough
to allow room for the
folded seat.
A
B C
♦
Optional equipment